Definitions of the properties in the trc.properties file that is
packaged with the BigFix® Remote Control
Server.
DO NOT EDIT THE FOLLOWING LINE
THE FOLLOWING LINES CAN BE EDITED FOR YOUR ENVIRONMENT:
rc.heartbeat_timeout=
| Modifiable Field |
rc.heartbeat_timeout |
| Field Description |
While an endpoint is active, it periodically reports
back to the server. This value is the number of minutes between each
report back to the server or heartbeat. |
| Possible Values |
User Defined |
| Value Definition |
|
rc.create.assets.from.callhome=
| Modifiable Field |
rc.create.assets.from.callhome |
| Field Description |
If target information sent from the target to the
server is not already in the database, create these targets in the
database |
| Possible Values |
True or False |
| Value Definition |
- True
- Target information is added to the database.
- False
- Target information is not added to the database.
|
rc.create.assets.from.brokers=
| Modifiable Field |
rc.create.assets.from.brokers |
| Field Description |
Use to allow an unregistered target to register with
the server at the start of a remote control session that uses a
broker. The target information is sent to the server when the target
user enters the connection code. |
| Possible Values |
True or False |
| Value Definition |
- True
- Unregistered targets are added to the database.
- False
- Unregistered targets are not added to the database.
|
DO NOT EDIT THE FOLLOWING LINES
rc.validation.relative.url=
rc.audit.relative.url=
rc.upload.url=
THE FOLLOWING LINES CAN BE EDITED FOR YOUR ENVIRONMENT:
rc.show.controller.splash=
| Modifiable Field |
rc.show.controller.splash |
| Field Description |
Use this property to determine whether the controller
splash screen is displayed before the remote control session
starts. |
| Possible Values |
True or False |
| Value Definition |
- True
- The controller splash screen is displayed before the
remote control session starts. True is the default
value.
- False
- The controller splash screen is not displayed during the
initiation of a remote control session.
|
rc.recording.directory=
| Modifiable Field |
rc.recording.directory |
| Field Description |
Directory that is used for storing session recordings
on the Server. |
| Possible Values |
User-defined. For example,
rc_recordings. Can be specific or
relative. |
| Value Definition |
|
unknown.recording.action=
| Modifiable Field |
unknown.recording.action |
| Field Description |
Determines what action is returned to the target if a
target requests to upload a recording for a session that is not
known to the server. |
| Possible Values |
0, 1, 2 |
| Value Definition |
- 0
- The target can upload the recording.
- 1
- The target must keep the recording locally in its file
system.
- 2
- The target must delete the recording.
|
rc.dialog.session.accept.directory=
| Modifiable Field |
rc.dialog.session.accept.directory |
| Field Description |
Directory that is used for storing bitmap files that
are uploaded when you configure the session acceptance
window. |
| Possible Values |
User-defined. For example,
/sad_config. Can be specific or
relative. |
| Value Definition |
|
DO NOT EDIT THE FOLLOWING LINE:
Category Description: Email Settings
email.enabled=
| Modifiable Field |
email.enabled |
| Field Description |
Enable the email function. |
| Possible Values |
True or False |
| Value Definition |
- True
- Email is enabled.
- False
- Email is not enabled.
|
smtp.server=
| Modifiable Field |
smtp.server |
| Field Description |
The address of the SMTP server you are using for
email. |
| Possible Values |
User-defined. For example,
myserver.email.com |
| Value Definition |
|
smtp.authentication=
| Modifiable Field |
smtp.authentication |
| Field Description |
The SMTP server must authenticate the SMTP user ID
and password. |
| Possible Values |
True or False |
| Value Definition |
- True
- SMTP server must authenticate the user ID and
password.
- False
- SMTP server does not authenticate the user ID and
password.
|
smtp.userid=
| Modifiable Field |
smtp.userid |
| Field Description |
The user ID for the SMTP server. |
| Possible Values |
User-defined string |
| Value Definition |
|
smtp.password=
| Modifiable Field |
smtp.password |
| Field Description |
The password for the SMTP server. |
| Possible Values |
User-defined |
| Value Definition |
You can enter the password as
plain text. However, for security purposes the password can be
encrypted. To encrypt the password, enter the plain text and
click Encrypt.
|
error.admin.contact=
| Modifiable Field |
error.admin.contact |
| Field Description |
Details or relevant message for contacting an
administrator to report a problem. |
| Possible Values |
User-defined message. For example, Contact
helpdesk on 123456-123-123 |
| Value Definition |
|
file.email.name =
| Modifiable Field |
file.email.name |
| Field Description |
Default file name that is used when a report is
mailed out. For example, Selecting Email
Report from the Options menu.
The report is exported into a CSV file with this file name and
attached to the email. |
| Possible Values |
User-defined. For example,
report.csv. |
| Value Definition |
Must not be blank and must contain only characters
that are valid for a file name. |
file.email.mime.type =
| Modifiable Field |
file.email.mime.type |
| Field Description |
Represents the mime type for the file that is
attached to an email when a report is mailed out. |
| Possible Values |
User-defined. For example,
application/vnd.ms.excel. |
| Value Definition |
User-defined. Default is
application/vnd.ms.excel. Must be a
mime-type that is compatible only with plain-text or comma-separated
value (CSV) files. |
file.email.encoding =
| Modifiable Field |
file.email.encoding |
| Field Description |
Represents the encoding for the file that is attached
to an email when a report is mailed out. |
| Possible Values |
UTF-8, UTF-16BE, UTF16LE |
| Value Definition |
Default value is UTF16LE (Windows™ standard for Excel). |
file.email.type =
| Modifiable Field |
file.email.type |
| Field Description |
Represents the type for the file that is attached to
an email when a report is mailed out. |
| Possible Values |
TSV, CSV |
| Value Definition |
User-defined. TSV (Tab Separated Value), CSV
(comma-separated value). |
Category Description: Email Templates
url=
| Modifiable Field |
url |
| Field Description |
The main URL that is used to access the BigFix® Remote Control
Server UI. |
| Possible Values |
User-defined - for example
http://192.0.2.0/trc |
| Value Definition |
User-defined. URL and context root of
application. |
secure.url=
| Modifiable Field |
secure.url |
| Field Description |
Determines the base URL that is used to redirect
requests when secure communications are required. |
| Possible Values |
User-defined - for
examplehttps://X.X.X.X/trc
where X.X.X.X is the IP address of your BigFix® Remote Control
Server. Note: The url property must also be
configured. Do not replace HTTP with HTTPS in the
url property because the ports for each
might be different. |
| Value Definition |
User-defined. URL and context root of application
when you use secure connections. |
enforce.secure.web.access=
| Modifiable Field |
enforce.secure.web.access |
| Field Description |
An HTTP request that is not a target request. The
upload, or validation request is redirected to the same URL but uses
the value that is set in the secure.url
parameter as a base. |
| Possible Values |
True or False |
| Value Definition |
- True
- The http request is redirected to the secure url. This value is the
default value.
- False
- The http request is not redirected to the secure
url.
Note: When you change the value of this property, you must restart
the BigFix® Remote Control
Server service for the new value to take effect.
|
enforce.secure.endpoint.callhome=
| Modifiable Field |
enforce.secure.endpoint.callhome |
| Field Description |
Determines the url that is used by targets when they
send information to the BigFix® Remote Control
Server. |
| Possible Values |
True or False |
| Value Definition |
- True
- If an HTTP request is received from a target, the
request is redirected to the secure url. The secure url
is also returned in the response form the server. Forces
targets to use the secure url when they contact the
BigFix® Remote Control
Server. When you enable this property and you configure a
broker in your environment, you must set the
ServerURL parameter in the
broker properties file to HTTPS. Otherwise, the broker
does not redirect to the secure url and the target
cannot send information to the server. This value is the
default value.
- False
- Targets are not forced to use the secure url when they
contact the BigFix® Remote Control
Server. False is the default value.
Note: When you change the value of this property, you must restart
the BigFix® Remote Control
Server service for the new value to take effect.
|
enforce.secure.endpoint.upload=
| Modifiable Field |
enforce.secure.endpoint.upload |
| Field Description |
Determines whether the controller or target must use
the secure url to upload the recordings and audit information to the
server. |
| Possible Values |
True / False |
| Value Definition |
- True
- If an HTTP upload or a validation request is received,
the server redirects the request to an equivalent URL.
The URL is built with the value that is defined in
secure.url as a base. The
server also uses the value of
secure.url as a base to provide
the upload and validation URLs to the controller and
target when the session starts. When you enable this
property and you configure a broker in your environment,
you must set the ServerURL
parameter in the broker properties file to HTTPS.
Otherwise, the broker does not redirect to the secure
url and the target cannot send information to the
server. This value is
the default value.
- False
- If an HTTP upload or a validation request is received,
the server does not redirect to the secure url.
Note: When you change the value of this property, you must restart
the BigFix® Remote Control
Server service in order for the new value to take effect.
|
enforce.secure.weblogon=
| Modifiable Field |
enforce.secure.weblogon |
| Field Description |
Forces the default logon from the server UI to use
HTTPS. This property requires secure.url to be
set with the full host name. |
| Possible Values |
True / False |
| Value Definition |
- True
- Log on requests from the BigFix® Remote Control
Server UI use HTTPS. HTTPS is not shown in the url, but the
logon page with USERID/PASSWORD is posted by using
HTTPS. The URL that is defined in the
secure.url parameter is used.
If secure.url is set incorrectly,
the logon does not succeed. Enabling this parameter does
not prevent a logon request that uses HTTP through
another tool or page. This value is the default value.
- False
- Log on by using HTTP or HTTPS. Whichever protocol that
is used in the URL that is entered in the browser is
used.
|
enforce.secure.alllogon=
| Modifiable Field |
enforce.secure.alllogon |
| Field Description |
Force any logon action to use HTTPS, deny any
non-HTTPS logon. When you enable this property, you must set
secure.url with the full host
name. |
| Possible Values |
True / False |
| Value Definition |
- True
- Any logon attempt that uses HTTP is rejected and
redirected to the logon page. This value is the default
value.
- False
- Log on by using HTTP or HTTPS. Whichever protocol that
is used in the URL that is entered in the browser is
used.
|
account.lockout=
| Modifiable Field |
account.lockout |
| Field Description |
Lock a user account after a consecutive number failed
logon attempts. Set to 0 to disable this function. |
| Possible Values |
user defined |
| Value Definition |
User-defined. Integer. |
account.lockout.timeout=
| Modifiable Field |
account.lockout.timeout |
| Field Description |
If a user account is locked out due to consecutive
failed logon attempts, re-enable the account after this time. The
period can be MIN, HOUR, DAY, MONTH. Note: This property is only
valid when account.lockout is
enabled. |
| Possible Values |
User-defined |
| Value Definition |
User-defined. MIN, HOUR, DAY, MONTH. For example, set
to 5MIN means that the account is locked for 5
minutes. Set to 2DAY means that the account is
locked for 2 days. Note: If left blank, the account is locked until
manually set. |
account.lockout.allowlogonfrom=
| Modifiable Field |
account.lockout.allowlogonfrom |
| Field Description |
Use this property to allow users to log on from this
host even if their account is locked out due to consecutive failed
logon attempts. If your account is locked, you can log on to the
BigFix® Remote Control
Server from the computers whose IP address is listed. For example,
192.0.2.1;192.0.2.2;
Note: It is important to end each host name with a
semi-colon. |
| Possible Values |
User-defined - |
| Value Definition |
User-defined. A list of IP addresses separated by a
semi-colon. End the list with a semi-colon. |
account.lockout.reset.on.emailpassword=
| Modifiable Field |
account.lockout.reset.on.emailpassword |
| Field Description |
Determines whether a locked account is reset when the
user selects the forgotten password check box on the logon
screen. |
| Possible Values |
True / False |
| Value Definition |
- True
- The locked account is reset when the password reset
email is received from the administrator.
- False
- The locked account is not reset when the forgotten
password request is received.
Note: As this property uses the forgotten password feature, email
must be enabled in the system.
|
always.use.preinstalled.controller=
| Modifiable Field |
always.use.preinstalled.controller |
| Field Description |
Determines whether an installed controller is used
when you start a managed session, rather than using Java™ Web Start. |
| Possible Values |
True or False |
| Value Definition |
- True
- The installed controller is used when you start a
managed remote control session.
- False
- The installed controller is not used when you start a
managed remote control session. This value is the
default value.
|
email.from=
| Modifiable Field |
email.from |
| Field Description |
The email address to which users respond when they
receive email requests; in some cases, this email address might be
the same as the administrators email address. |
| Possible Values |
User-defined. For example,
trc@example.com |
| Value Definition |
Email address |
email.admin=
| Modifiable Field |
email.admin |
| Field Description |
The email address of the administrator for reporting
problems to. |
| Possible Values |
User-defined. For example,
admin@example.com |
| Value Definition |
Email address |
DO NOT EDIT THE FOLLOWING LINES
task.use.other.threads.queue.limit =
http =
audit.relative.url =
upload.relative.url=
addasset.relative.url=
call.home.relative.url=
oms.relative.url=
call.home.command.parameters=
match.on.assettag =
match.on.computername.if.valid.serial.or.uuid.stored =
THE FOLLOWING LINES CAN BE EDITED FOR YOUR ENVIRONMENT:
| Modifiable Field |
queue.processors |
| Field Description |
Number of processors (CPUs) in the system that is running
the BigFix® Remote Control
Server Used to determine the number of working threads that can be used by
the BigFix® Remote Control
Server program. |
| Possible Values |
User-defined |
| Value Definition |
User-defined integer |
DO NOT EDIT THE FOLLOWING LINES
queue.max.length =
serialised.queue.object=
row.sample =
character.width =
max.column.character.width =
min.table.character.width =
YOU CAN EDIT THE FOLLOWING FIELD:
| Modifiable Field |
use.scrollable.table |
| Field Description |
Determine whether you can scroll the results
table. |
| Possible Values |
True or False. |
| Value Definition |
- True
- You can scroll the table.
- False
- You cannot scroll the results table.
|
DO NOT EDIT THE FOLLOWING LINES
max.retries=
default.query=
default.pagerows=
query.authorised.queries=
all.users.query=
all.other.users.query=
all.groups.query=
selected.user.query=
selected.users.query=
selected.asset.query=
user.search.query=
asset.search.query=
selected.email.query=
scheduled.task.query=
task.list.query=
all.tasks=
report.list.query=
menu.links.query=
menu.actions.query=
menu.tasks.query=
menu.static.links.query=
menuscheduled.task.log.query=
attachments.query=
query.latest.unprocessed.revision=
query.all.unprocessed.revisions=
query.asset.count=
query.processed.incorrectly=
query.selected.task=
query.all.xml.revisions=
query.users.assets=
query.user.queries=
query.asset.queries=
query.unknown.pc.serial=
query.uploads.in.period.defined=
query.average.upload.time=
query.unprocessed.security.assets=
query.new.assets.in.period.defined=
query.average.process.time=
query.processed.in.period.defined=
query.selected.user.custom.query=
query.all.custom.query=
query.selected.users.groups=
query.unprocessable.pc.assets.count=
query.menu.static.items=
search.limit.results =
max.keys =
Category Description: Action Authority Settings
DO NOT EDIT THE FOLLOWING LINES
update.password.auth=
update.details.auth=
change.asset.owner.auth=
add.user.auth=
all.user.auth=
all.asset.auth=
all.custom.reports.auth=
query.builder.auth=
search.auth=
task.auth=
reprocess.auth=
group.auth=
view.group.auth=
delete.user.auth=
email.report.authority=
edit.printer.auth=
user.skill.auth=
add.ticket.auth=
edit.ticket.auth=
setup.ticket.auth=
edit.table.auth=
edit.probeset.auth=
edit.po.auth=
rc.auth=
asset.revisions =
asset.keep.baseline=
THE FOLLOWING LINE CAN BE EDITED FOR YOUR ENVIRONMENT:
| Modifiable Field |
delete.target.auth |
| Field Description |
Determines what level of access is required to delete a
target when you use the Delete Target action. |
| Possible Values |
U, S, A |
| Value Definition |
- U
- User authority.
- S
- Super User authority.
- A
- Administrator authority. This value is the default
value.
Note: If you change the value of this property, you must restart the
server service for the new value to take effect.
|
| Modifiable Field |
browse.targets.auth |
| Field Description |
Determines which levels of user authority see the
Browse option that is displayed in the
Targets menu. |
| Possible Values |
U, S, A |
| Value Definition |
- U
- User authority. All user authorities see the
Browse option in the
Targets menu. This value is the
default value.
- S
- Super User authority. Only Super Users and Admin users see
the Browse option in the
Targets menu.
- A
- Administrator authority. Only Admin users see the
Browse option in the
Targets menu.
Note: If you change the value of this property, you must restart the
server service for the new value to take effect.
|
| Modifiable Field |
view.all.targets.auth |
| Field Description |
Determines which levels of user authority see the
All targets option that is displayed in the
Targets menu. |
| Possible Values |
U, S, A |
| Value Definition |
- U
- User authority. All user authorities see the All
targets option in the
Targets menu. This value is the
default value.
- S
- Super User authority. Only Super Users and Admin users see
the All targets option in the
Targets menu.
- A
- Administrator authority. Only Admin users see the
All targets option in the
Targets menu.
Note:
- If you change the value of this property, you must restart
the server service for the new value to take effect.
- If the home page of a user is set to the All
targets report, the authority to view the
report is determined by the value of
view.all.targets.auth. If they do
not have authority to view All
targets, the Search
targets page is displayed.
- If you set view.all.targets.auth to
S or A, you must
set target.search.minimum.nonwildcards
to greater than 1. Otherwise, users with user authority can
use the search targets page to display all of the targets.
|
search.session.history.auth=
| Modifiable Field |
search.session.history.auth |
| Field Description |
Determines which levels of user authority sees the
Search option that is displayed in the
Sessions menu. |
| Possible Values |
U, S, A |
| Value Definition |
- U
- User authority. All user authorities see the
Search option in the
Sessions menu. This value is the
default value.
- S
- Super User authority. Only Super Users and Admin users see
the Search option in the
Sessions menu.
- A
- Administrator authority. Only Admin users see the
Search option in the
Sessions menu.
Note: If you change the value of this property, you must restart the
server service for the new value to take effect.
|
Category Description: Schedules
DO NOT EDIT THE FOLLOWING LINES
scheduled.upload=
update.client.files=
scheduled.upload.interval=
scheduled.upload.queue.threshold=
scheduled.upload.queue.lookup.threshold=
scheduled.update.demographics=
scheduled.demographics.check.interval=
get.application.files.relative.url=
changed.software.upload =
changed.hardware.upload =
scheduled.launch.on.startup=
YOU CAN EDIT THE FOLLOWING LINES
Category Description - LDAP synchronization task
| Modifiable Field |
scheduled.interval |
| Field Description |
The frequency in numeric value that the server must check
for scheduled tasks. |
| Possible Values |
User-Defined |
| Value Definition |
User-Defined. Positive Integer Note: If you change the
value of this property, you must restart the server service for the
new value to take effect. |
scheduled.interval.period=
| Modifiable Field |
scheduled.interval.period |
| Field Description |
The unit of time in which the server must check for
scheduled tasks. |
| Possible Values |
minutes or hours or days |
| Value Definition |
Minutes or Hours or Days |
| Modifiable Field |
scheduled.task.period |
| Field Description |
The interval units to be used when scheduling
tasks. |
| Possible Values |
minutes or hours or days |
| Value Definition |
Minutes or Hours or Days |
DO NOT EDIT THE FOLLOWING LINES
scheduler.use.queue=
task.process.xml.max.queue.length=
task.process.files.max.queue.length=
task.process.filescan.max.queue.length=
task.process.software.security.length=
YOU CAN EDIT THE FOLLOWING LINES
DBCleaner is a looping utility that is used to clean up older
log files that are based on age of entries (in days). Frequency is in days. To
disable cleaning, set the value to -1.
dbcleaner.launch.on.startup=
| Modifiable Field |
dbcleaner.launch.on.startup |
| Field Description |
Start dbCleaner when the server
application starts. |
| Possible Values |
1 or 0 |
| Value Definition |
1 to start dbCleaner. 0, do not
start dbCleaner. |
| Modifiable Field |
dbcleaner.frequency |
| Field Description |
Frequency the DBCleaner runs at in days |
| Possible Values |
Set to -1 to disable cleaning |
| Value Definition |
User-Defined - number of days |
dbleaner.interval.period=
| Modifiable Field |
dbleaner.interval.period |
| Field Description |
Period the database logs are cleaned |
| Possible Values |
User-Defined. For example, mins, or
hours, or days, or
months |
| Value Definition |
User-Defined - number of days |
| Modifiable Field |
server.log.max.age |
| Field Description |
Maximum age of entries in the server log file before they
are deleted. |
| Possible Values |
User-Defined |
| Value Definition |
User-Defined - number of days |
| Modifiable Field |
target.offline.max.age |
| Field Description |
Number of days that an offline target (that is no longer
calling home) is kept in the database. |
| Possible Values |
User-Defined When the value is set to 0, no offline
target cleanup is performed. |
| Value Definition |
User-Defined - number of days |
DO NOT EDIT THE FOLLOWING LINE
THE FOLLOWING LINES CAN BE EDITED FOR YOUR ENVIRONMENT:
| Modifiable Field |
task.log.max.age |
| Field Description |
Maximum age of entries in the task log table before they
are deleted. |
| Possible Values |
User-Defined |
| Value Definition |
User-Defined - number of days |
transfers.history.max.age=
| Modifiable Field |
transfers.history.max.age |
| Field Description |
Maximum age of entries in the transfer table before they
are deleted. |
| Possible Values |
User-Defined |
| Value Definition |
User-Defined - number of days |
| Modifiable Field |
user.access.max.age |
| Field Description |
Maximum age of entries in the access table before they
are deleted. |
| Possible Values |
User-Defined |
| Value Definition |
User-Defined - number of days |
DO NOT EDIT THE FOLLOWING LINES:
THE FOLLOWING LINES CAN BE EDITED FOR YOUR ENVIRONMENT:
Category Description: Password Settings
| Modifiable Field |
password.encrypt |
| Field Description |
Determines whether passwords are encrypted in the
database. |
| Possible Values |
Yes or No |
| Value Definition |
- Yes
- Passwords are encrypted in the database.
- No
- Passwords are not encrypted in the database.
|
| Modifiable Field |
password.reuse |
| Field Description |
Determines whether users can reuse passwords. |
| Possible Values |
Yes or No |
| Value Definition |
- Yes
- Users can reuse passwords.
- No
- Users cannot reuse passwords.
|
| Modifiable Field |
expire.new.password |
| Field Description |
Determines whether users are required to set their own
password after they receive the computer-generated password. |
| Possible Values |
True or False |
| Value Definition |
- True
- Users must set their own password after they receive the
computer-generated password.
- False
- Users do not have to set their own password after they
receive the computer-generated password.
|
| Modifiable Field |
password.timeout |
| Field Description |
Determines whether passwords expire. |
| Possible Values |
True or False |
| Value Definition |
- True
- Passwords expire.
- False
- Passwords do not expire.
|
| Modifiable Field |
password.timeout.period |
| Field Description |
Defines after how many days passwords expire. |
| Possible Values |
User-defined. The default value is 90. |
| Value Definition |
User-defined integer |
| Modifiable Field |
password.period |
| Field Description |
Maximum number of days before a password can be
reused. |
| Possible Values |
User-defined |
| Value Definition |
User-defined integer |
| Modifiable Field |
password.check |
| Field Description |
Determines whether to enable password rule
checking. |
| Possible Values |
True or False |
| Value Definition |
- True
- Passwords must follow certain rules. This value is the
default value.
- False
- Passwords do not follow rules.
|
password.must.have.non.numeric=
| Modifiable Field |
password.must.have.non.numeric |
| Field Description |
Determines whether passwords must contain non-numeric
characters. |
| Possible Values |
True or False |
| Value Definition |
- True
- Passwords must contain non-numeric characters. This value is
the default value.
- False
- Passwords do not need to contain non-numeric
characters.
|
password.must.have.numeric=
| Modifiable Field |
password.must.have.numeric |
| Field Description |
Determines whether passwords must contain numeric
characters. |
| Possible Values |
True or False |
| Value Definition |
- True
- Passwords must contain numeric characters. This value is the
default value.
- False
- Passwords do not have to contain numeric characters.
|
password.must.have.non.alphanumeric=
| Modifiable Field |
password.must.have.non.alphanumeric |
| Field Description |
Determines whether passwords must contain
non-alphanumeric characters. |
| Possible Values |
True or False |
| Value Definition |
- True
- Passwords must contain non-alphanumeric characters. This
value is the default value.
- False
- Passwords do not have to contain non-alphanumeric
characters.
|
| Modifiable Field |
password.min.length |
| Field Description |
Minimum length of a password. |
| Possible Values |
User-defined. Default value is eight. |
| Value Definition |
User-defined integer |
| Modifiable Field |
password.max.length |
| Field Description |
Maximum length of a password. |
| Possible Values |
User-defined. Default value is fifteen. |
| Value Definition |
User-defined integer |
password.requires.mixedcase=
| Modifiable Field |
password.requires.mixedcase |
| Field Description |
The password must contain both lowercase and uppercase
characters. |
| Possible Values |
True or False |
| Value Definition |
- True
- Passwords must contain both lowercase and uppercase
characters. This value is the default value.
- False
- Passwords do not need to contain both lowercase and
uppercase characters.
|
| Modifiable Field |
password.max.sequence |
| Field Description |
Maximum length of a sequence of characters. For example,
1234. |
| Possible Values |
User-defined. Default value is three. |
| Value Definition |
User-defined integer |
password.max.matching.sequential.chars=
| Modifiable Field |
password.max.matching.sequential.chars |
| Field Description |
Maximum number of repeating characters. For example, 111
aaa. |
| Possible Values |
User-defined. Default value is two. |
| Value Definition |
User-defined integer |
password.max.previous.chars=
| Modifiable Field |
password.max.previous.chars |
| Field Description |
Maximum number of sequential password characters that can
be reused in a new password. |
| Possible Values |
User-defined. Default value is three. |
| Value Definition |
User-defined integer |
password.iterationcount =
| Modifiable field |
password.iterationcount |
| Field Description |
Use to define the number of times that a password is
hashed before it is stored in the database. |
| Possible Values |
User defined. |
| Value Definition |
Default is 5000. The property has no maximum value. The
higher the iteration count, the longer it takes for someone to try to
break the password. However, the larger the iteration count, the slower
it is to log on to the server or to change your password. A higher
iteration count slows the system down. Therefore you must set it to a
value that is acceptable to your environment and maintains acceptable
performance. |
DO NOT EDIT THE FOLLOWING LINE
table.column.internationalisation =
THE FOLLOWING LINES CAN BE EDITED FOR YOUR ENVIRONMENT:
csv.export.use.byte.order.mark=
| Modifiable Field |
csv.export.use.byte.order.mark |
| Field Description |
Determines whether a Unicode UTF-8 Byte Order Mark (BOM)
is included at the start of the file when you export a CSV file. |
| Possible Values |
True or False |
| Value Definition |
- True
- Include a Unicode UTF-8 Byte Order Mark (BOM).
- False
- Do not include a Unicode UTF-8 Byte Order Mark (BOM).
|
tsv.export.use.byte.order.mark=
| Modifiable Field |
tsv.export.use.byte.order.mark |
| Field Description |
Determines whether a Unicode UTF-8 Byte Order Mark (BOM)
is included at the start of the file when you export a TSV file. |
| Possible Values |
True or False |
| Value Definition |
- True
- Include a Unicode UTF-8 Byte Order Mark (BOM).
- False
- Do not include a Unicode UTF-8 Byte Order Mark (BOM).
|
edit.properties.show.file.comments =
| Modifiable Field |
edit.properties.show.file.comments |
| Field Description |
Determines whether you see the comments in the properties
file when you edit the properties in the server UI. |
| Possible Values |
1 / 0 |
| Value Definition |
- 1
- The comments are displayed when you edit the
properties.
- 0
- The comments are not displayed when you edit the
properties.
|
edit.properties.show.translated.comments=
| Modifiable Field |
edit.properties.show.translated.comments |
| Field Description |
Determines whether you see the available globalized
comments in the properties file when you edit the properties in the
server UI. |
| Possible Values |
1 / 0 |
| Value Definition |
- 1
- The comments are displayed when you edit the
properties.
- 0
- The comments are not displayed when you edit the
properties.
|
| Modifiable Field |
date.time.format |
| Field Description |
Defines the way dates and times are input into any
date/time fields |
| Possible Values |
User-defined |
| Value Definition |
User-defined. For example, EEEE, dd MMMM yyyy,
HH:mm:ss |
| Modifiable Field |
date.only.format |
| Field Description |
Defines the way dates are input into any date only
fields |
| Possible Values |
User-defined |
| Value Definition |
User-defined. For example, EEEE, dd MMMM
yyyy |
| Modifiable Field |
time.only.format |
| Field Description |
Defines the way dates are input into any date only
fields |
| Possible Values |
User-defined |
| Value Definition |
User-defined. For example,
HH:mm:ss |
| Modifiable Field |
invalid.macs |
| Field Description |
List of target Mac addresses that are unacceptable to
send to the server in the target information. |
| Possible Values |
User Defined for example - 000000000001 |
| Value Definition |
|
| Modifiable Field |
invalid.assettags |
| Field Description |
List of target assettags that are
unacceptable to send to the server in the target information. |
| Possible Values |
User Defined for example, unknown |
| Value Definition |
|
| Modifiable Field |
invalid.net.addresses |
| Field Description |
List of target network addresses that are unacceptable to
send to the server in the target information. |
| Possible Values |
User Defined for example -0.0.0.0,127.0.0.0/8 |
| Value Definition |
|
report.timeout.frequency =
| Modifiable Field |
report.timeout.frequency |
| Field Description |
When a report is generated its output is cached, so that
it can be reloaded without the application going back to the database
for the data. The property report.timeout.frequency
defines the time value that the report output is cached for. |
| Possible Values |
User Defined |
| Value Definition |
|
report.manager.frequency =
| Modifiable Field |
report.manager.frequency |
| Field Description |
This property defines the time value for how often the
Report manager loops and re loads the report data from the
database |
| Possible Values |
User Defined |
| Value Definition |
|
| Modifiable Field |
report.manager.period |
| Field Description |
Defines the time period that is used for
report.timeout.frequency and
report.manager.frequency. |
| Possible Values |
User Defined. For example seconds, minutes, hours.
Default is minutes |
| Value Definition |
|
allow.target.group.override =
| Modifiable Field |
allow.target.group.override |
| Field Description |
Determines the group that a target is made a member of
during a silent target installation when the
GROUP_LABEL parameter is used. |
| Possible Values |
True or False |
| Value Definition |
- True
- The target is assigned to the target group that the
GROUP_LABEL parameter defines.
- False
- The target is assigned to the default target group that is
defined for the default.group.name
property.
- The GROUP_LABEL
parameter is ignored.
|
allow.override.at.triggered.callhomes =
| Modifiable Field |
allow.override.at.triggered.callhomes
|
| Field Description |
Determines the group that a target is made a member
during triggered target callhomes when the
GROUP_LABEL parameter is used. |
| Possible Values |
True or False |
| Value Definition |
- True
- The target is assigned to the target group that the
GROUP_LABEL parameter defines.
- False
- The GROUP_LABEL parameter is
ignored.
|
| Modifiable Field |
default.group.name |
| Field Description |
Defines the name that is given to the default group of
users |
| Field Description |
Defines the name that is given to the default group of
targets |
| Possible Values |
User Defined. For example, DefaultGroup |
| Value Definition |
|
Category Description: Default Non-Binary policies values
default.rc_def_inactivity =
| Modifiable Field |
default.rc_def_inactivity |
| Field Description |
Number of seconds to wait before the remote control
session connection ends automatically after no session activity.
|
| Possible Values |
User Defined - seconds |
| Value Definition |
- 0 - disables the timer and the session does not time
out.
- Less than 60 - session times out after 60 seconds.
- Greater than 60 - session times out when the value is
reached.
|
default.rc_def_grace_time =
| Modifiable Field |
default.rc_def_grace_time |
| Field Description |
Sets the number of seconds to wait for the target user to
respond before a session starts or times out, used with Enable
user acceptance for incoming connections. |
| Possible Values |
User-defined - 0 - 60 seconds |
| Value Definition |
If set to 0, the session starts without displaying the
user acceptance window on the target. Default is 5 |
default.rc_def_timeout_op =
| Modifiable Field |
default.rc_def_timeout_op |
| Field Description |
Determines what action is taken if the user acceptance window
timeout lapses. That is, the target user does not click accept or
refuse within the number of seconds defined for Acceptance
Grace time
|
| Possible Values |
ABORT or PROCEED |
| Value Definition |
- Abort
- Session is not started. Default is Abort.
- Proceed
- Session is started.
|
DO NOT EDIT THE FOLLOWING LINES
default.rc_def_local_audit
default.rc_def_pre_script =
default.rc_def_post_script=
YOU CAN EDIT THE FOLLOWING LINES
default.rc_def_script_op =
| Modifiable Field |
default.rc_def_script_op |
| Field Description |
Determines what action is taken if the prescript
execution fails. A positive value or 0 is considered as a successful run
of the pre-session script. A negative value, script that is not found,
or not finished running within 3 minutes is considered a failure.
|
| Possible Values |
ABORT or PROCEED |
| Value Definition |
- Abort
- If the prescript run is a fail, the session does not
start.
- Proceed
- If the prescript run is a fail, the session continues.
|
default.rc_def_insession_ft =
| Modifiable Field |
default.rc_def_insession_ft |
| Field Description |
Controls the transfer of files during an
Active session. Its value determines the
availability of the Send file or Pull
file options in the File Transfer
menu within the controller window. |
| Possible Values |
NONE, BOTH, SEND, PULL |
| Value Definition |
- Set to NONE
- The Send file and Pull
file options are not available for
selection. No file transfers can be initiated.
- Set to BOTH
- The Send file and Pull
file options are available for selection.
Files can be transferred to the target and transferred from
the target. BOTH is the default value.
- Set to PULL
- Only the Pull file option is
available for selection. Files can be transferred only from
the target.
- Set to SEND
- Only the Send file option is
available for selection. Files can be transferred only to
the target.
|
DO NOT EDIT THE FOLLOWING LINES
default.rc_def_ft_actions =
default.rc_def_allowed_times
new.password.template
access.request.request.template
access.request.request.anon.template
access.request.reject.template
access.request.reject.anon.template
access.request.grant.template
access.request.grant.anon.template
YOU CAN EDIT THE FOLLOWING LINES
trc.feature.remote.install =
| Modifiable Field |
trc.feature.remote.install |
| Field Description |
Determines the availability of the remote installation
function. Note: The remote installation feature is deprecated in
Remote Control
V9.1.3. Therefore, during a server
upgrade, if you select to keep existing properties, the value of
this property is still set to False by default.
|
| Possible Values |
True or False |
| Value Definition |
- True
- The Remote Install function is available in the
Admin menu.
- False
- The Remote Install function is not available in the
Admin menu. This value is the
default value.
Note: If you change the value of this
property, you must restart the server service.
|
trc.feature.denied.program.execution.list =
| Modifiable Field |
trc.feature.denied.program.execution.list |
| Field Description |
Determines the availability of the Denied Program
Execution policy when you create groups or permissions links. |
| Possible Values |
True / False |
| Value Definition |
- True
- The Denied program execution list
policy is displayed on the Edit group
screen and the Manage Permissions
screen.
- False
- The Denied program execution list
policy is not displayed on the Edit
group screen and the Manage
Permissions screen.
Note: This feature works only on the following operating systems
- Windows™ XP (32-bit
editions only)
- Windows™ Server 2003
(32-bit editions only)
Note: If you set this property back to true, after it is set to false,
you must restart the server service.
|
trc.ticket.allow.access =
| Modifiable Field |
trc.ticket.allow.access |
| Field Description |
Determines the availability of the Request
Access function. |
| Possible Values |
1 or 0 |
| Value Definition |
- 1
- The Request Access option is
displayed on the start session screen. This option allows
the controller user to temporarily access a target that they
do not have permission to access.
- 0
- The Request Access option is not
displayed on the start session screen and the
Request Access menu item is
disabled.
|
trc.ticket.allow.allaccess =
| Modifiable Field |
trc.ticket.allow.allaccess |
| Field Description |
Determines the availability of the Request
Access function when a user who is not registered in
Remote Control tries to access by using the anonymous URL. For more information
about the anonymous URL and how to request access to targets when you
are not a registered user in the BigFix® Remote Control
Server, see the BigFix® Remote Control Controller User's
Guide. |
| Possible Values |
1 or 0 |
| Value Definition |
- 1
- The Request Access to target screen is displayed when the
user types in the anonymous URL.
http://servername/trc/requestAccessAnon.do
Where servername is the address of
your BigFix® Remote Control
Server.
- 0
- The logon screen is displayed when the user types in the
anonymous URL.
|
| Modifiable Field |
trc.ticket.admin |
| Field Description |
Defines the user group of administrators who receive an
email when an access request is submitted. |
| Possible Values |
User defined. For example, Adminemail. Note:
- The group name must be a valid user group that is already
defined in the server.
- If this field is left blank, the email address that is set
for the property email.admin receives
an email when an access request is submitted.
|
| Value Definition |
The group name must be already defined in the
database. |
| Modifiable Field |
trc.ticket.groupprefix |
| Field Description |
Defines the prefix that is assigned to the name of the
temporary user and target groups that are created when an access request
is granted. |
| Possible Values |
User-defined. For example. t$t |
| Value Definition |
The temporary groups names are in the format P_R_G
Where
- P = trc.ticket.groupprefix property
- R = the request key value for the access request
- G = the group type U for user group, T for target group.
|
| Modifiable Field |
trc.ticket.priority |
| Field Description |
Defines the default priority level for access request
permissions. |
| Possible Values |
0, 1, or 5 |
| Value Definition |
The priority value that is used when you set permissions
for an access request. The value overrides any other permission values.
For example: 5 is the highest priority. 5 overrides 1 and 1
overrides 0. |
trc.default.request.priority =
| Modifiable Field |
trc.default.request.priority |
| Field Description |
Defines the priority value that is displayed first in the
priority list when you set the permissions for an access
request. |
| Possible Values |
0, 1, 5 |
| Value Definition |
- 0
- 0 is displayed first in the list.
- 1
- 1 is displayed first in the list.
- 5
- 5 is displayed first in the list.
|
DO NOT EDIT THE FOLLOWING LINES
trc.ticket.temp.usergrpupdesc
trc.ticket.temp.targetgrpupdesc
THE FOLLOWING LINES CAN BE EDITED FOR YOUR ENVIRONMENT:
task.logdistribution.enabled =
| Modifiable Field |
task.logdistribution.enabled |
| Field Description |
Determines whether the logs that contain session
information are written to the BigFix® Remote Control
Server. |
| Possible Values |
True or False |
| Value Definition |
- True
- The logs are written to the server to the location defined
by task.logdistribution.path.
- False
- The logs are not written to the server.
|
task.logdistribution.path =
| Modifiable Field |
task.logdistribution.path |
| Field Description |
Determines the location that the log file that contains
session information is written to on the server. |
| Possible Values |
User defined. For example,
c:\logtask\logs |
| Value Definition |
|
DO NOT EDIT THE FOLLOWING LINE
task.logdistribution.file
YOU CAN EDIT THE FOLLOWING LINES
| Modifiable Field |
registry.title.X |
| Field Description |
Defines the name of the menu item that is displayed in
the registry keys menu. Use the menu to view the value for the specific
registry key that is defined by
registry.key.X
|
| Possible Values |
User defined. For example, Services. |
| Value Definition |
X = 0 - 9. |
| Modifiable Field |
registry.key.X |
| Field Description |
Defines the path to a specific registry key that you can
use to view its value on the target. |
| Possible Values |
User defined. For example,
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services |
| Value Definition |
X = 0 - 9. |
| Modifiable Field |
nat.ip.support |
| Field Description |
Used to define the list of IP addresses that are used by
the server when a connection is made to a target when NAT addresses are
present. |
| Possible Values |
0, 1, 2, 3, 4 |
| Value Definition |
- 0
- IP=heartbeatlist.
Server uses the heartbeat list of IP
addresses to make a connection with the target.
- 1
- IP= heartbeatlist; source
Server uses
the heartbeatlist list of IP
addresses then the source IP address to make a
connection with the target.
- 2
- IP = source;heartbeatlist
Server uses the source IP address then the
heartbeatlist of IP addresses
to make a connection with the target.
- 3
- IP = heartbeat;source
Server checks
the IP addresses that are listed in the
nat.exclude.list property to
see whether the source IP is there. If it is not, the
server uses the heartbeatlist of IP
addresses and then source IP address to make a
connection with the target.
- 4
- IP = source;heartbeat
Server checks
the IP addresses listed in the
nat.exclude.list property to
see whether the source IP is there. If it is not, the
server uses the source IP and then the
heartbeatlist of IP addresses
to make a connection with the target.
|
| Modifiable Field |
nat.exclude.list |
| Field Description |
Defines a list of NAT addresses that are ignored by the
server. |
| Possible Values |
User defined. |
| Value Definition |
|
match.allow.data.changes =
| Modifiable Field |
match.allow.data.changes |
| Field Description |
Is used to find a match for a target in the database if a
perfect match cannot be found. For more information about how targets
are registered, see Ensure targets are registered correctly. |
| Possible Values |
True or False |
| Value Definition |
- True
- This value is the default value. When set to true, a best
match is considered if all but 1 of the 4 perfect match
criteria match an already registered target.
- False
- If the perfect match process is enabled and no match is
found for all 4 of the target criteria, the best match
option is not considered. Depending on the value of
match.change.notifications, if no
match is found then a new target entry is created in the
database.
|
match.computername.only =
| Modifiable Field |
match.computername.only |
| Field Description |
Determines whether a targets computer name is used to see
whether it is already registered with the BigFix® Remote Control
Server. When a target contacts the server, its computer name is compared to
the computer names of the targets that are already registered with the
server. If a match is found, the details of the matched target are
updated. If no match is found, a new target entry is created. For more
information about how targets are registered, see Ensure targets are registered correctly. |
| Possible Values |
True or False |
| Value Definition |
- True
- When a target contacts the server, the targets computer name
is checked against the computer names of already registered
targets. If a match is found, the details of the matched
target are updated with the details of the target that is
contacting the server. If no match is found, a new target
entry is created.
- False
- When a target contacts the server, the targets computer name
is not used to see whether the target is already registered
with the server.
|
| Modifiable Field |
match.guid.only |
| Field Description |
Determines whether a targets guid is
used to see whether it is already registered with the BigFix® Remote Control
Server. When a target contacts the server, its guid is
compared to the guid values of the targets that are
already registered with the server. If a match is found, the details of
the matched target are updated. If no match is found, a new target entry
is created. For more information about how targets are registered, see
Ensure targets are registered correctly. |
| Possible Values |
True or False |
| Value Definition |
- True
- When a target contacts the server, the targets
guid is checked against the
guid values of already registered
targets. If a match is found, the details of the matched
target are updated with the details of the target that is
contacting the server. If no match is found, a new target
entry is created.
- False
- When a target contacts the server, the targets
guid is not used to see whether the
target is already registered with the server.
|
match.change.notification =
| Modifiable Field |
match.change.notification |
| Field Description |
Use this property to force a target to save its
configuration details locally. If any of the target details change, it
can send the old details and its current details to the server. The
details can be used to try to find a match in the database. For more
information about how targets are registered, see Ensure targets are registered correctly. |
| Possible Values |
True or False |
| Value Definition |
- True
- This value is the default value. The target saves its
details locally to a file called
tgt_info.proprties. When the target
contacts the server, it sends its old details and its new
details. The old details are used to try to find a perfect
match for the target in the database.
- False
- The old target details are not sent to the server and the
new changed details are used to try to find a match. However
if only one of the 4 criteria changes and the
match.allow.data.changes property
is set to true, then a best match is looked for.
|
| Modifiable Field |
rc.tmr.at.registration |
| Field Description |
Determines whether a target is assigned to target groups
by using rules the first time it registers with the BigFix® Remote Control
Server |
| Possible Values |
True or False |
| Value Definition |
- True
- When a target contacts the server for the first time, its
computer name and IP address is compared to the computer
names and IP addresses that are defined in the target
membership rules. If a match is found, the target is
assigned to the target groups that are defined in the
matching rules.
- False
- When a target contacts the server for the first time, the
targets computer name and IP address are not checked against
any defined rules.
|
rc.tmr.at.every.callhome =
| Modifiable Field |
rc.tmr.at.every.callhome |
| Field Description |
Determines whether a target is assigned to target groups
by using rules every time it contacts the BigFix® Remote Control
Server |
| Possible Values |
True or False |
| Value Definition |
- True
- Every time that a target contacts the server its computer
name and IP address are compared to the computer names and
IP addresses that are defined in the target membership
rules. If a match is found, the target is assigned to the
target groups that are defined in the matching rules.
Therefore, the targets group membership is recalculated
every time that it contacts the server.
- False
- Every time that a target contacts the server its computer
name and IP address are not checked against any defined
rules.
|
rc.tmr.at.triggered.callhomes =
| Modifiable Field |
rc.tmr.at.triggered.callhomes |
| Field Description |
Determines whether a target is assigned to target groups
by using rules any time it contacts the BigFix® Remote Control
Server because of a change to its configuration or when it comes
online. |
| Possible Values |
True or False |
| Value Definition |
- True
- When a target contacts the server because of a configuration
change or when it comes online, its computer name and IP
address are compared to the computer names and IP addresses
that are defined in the target membership rules. If a match
is found, the target is assigned to the target groups that
are defined in the matching rules.
- False
- Any time a target contacts the server because of a
configuration change or when it comes online, its computer
name and IP address is not checked against any defined
rules.
|
| Modifiable Field |
rc.tmr.at.rules.change |
| Field Description |
When a rule is added, edited, or deleted. Determines
whether the target group membership is altered for targets that were
assigned to target groups by using rules. |
| Possible Values |
True or False |
| Value Definition |
- True
- Applies to targets whose group membership was assigned by
using rules. Their group membership is recalculated whenever
a rule is added, edited, or deleted.
- False
- Applies to targets whose group membership was assigned by
using rules. Their group membership is not recalculated
whenever a rule is added, edited, or deleted.
|
DO NOT EDIT THE FOLLOWING LINES
hb.timeout.lookup.mode
hb.timeout.att.defn
THE FOLLOWING LINE CAN BE EDITED FOR YOUR ENVIRONMENT:
oracle.increment.keys.off =
| Modifiable Field |
oracle.increment.keys.off |
| Field Description |
Used as a workaround for a driver bug in the Oracle JDBC
versions 5 & 6 drivers that are included with Oracle 11g |
| Possible Values |
1 or 0 |
| Value Definition |
- 1
- Set to 1 if you are using the Oracle JDBC versions 5 & 6
drivers.
- 0
- Set to 0 if you are using JDBC 4 drivers (Oracle 10i) or if
future versions of the JDBC driver address the get
autogenerated keys bug.
|
| Modifiable Field |
default.homepage.method |
| Field Description |
Used to determine whether the default home page is a
report, or the search targets page. This property is useful if you have
numerous targets in the Remote Control database. The default home page that is set by the server is the
All targets report. The report can take some
time to load if you have numerous targets. Then you must scroll through
the report to find the relevant target. If you set the search page as
the home page, you can search for specific targets as soon as you log
on. |
| Possible Values |
report or search |
| Value Definition |
- report
- The default home page is set to the report that is defined
by the query in the default.query
property. By default it is the All
targets report.
- search
- The default home page is set to the search targets
page.
Note: This property is overridden if a home page is already defined. For
example,
- The user defines their own home page.
- A home page is defined for the user groups that the user
belongs to.
For more information about setting a home page, see Manage the home page for a user or group.
|
workaround.rdp.console.w2k3 =
| Modifiable Field |
workaround.rdp.console.w2k3 |
| Field Description |
Used as a workaround for a Windows™ 2003 limitation. A remote control
session cannot capture the display if a remote desktop session has taken
place or is taking place on the target. |
| Possible Values |
0, 1 or 2 |
| Value Definition |
When a Remote Desktop user uses the
/admin or /console option
to start a Remote Desktop session with a Windows™ Server 2003 system and an Remote Control user starts a remote control session before, during or after the
Remote Desktop session, remote control is unable to capture the display.
The result is that a gray screen is displayed in the controller. This
issue is a limitation in Windows™ Server 2003. Therefore, this property provides a
workaround that will reset the Windows™ session either after each Remote Desktop session ends,
or before an Remote Control session starts, depending on the value selected.
- 0
- The workaround is disabled. This value is the default
value.
- 1
- Reset the session automatically when a remote control
session is started.
Note: The Windows™ sessions take a
couple of minutes to initialize and a blank desktop is
displayed on the controller until the initialization is
complete. A message is displayed to inform the
controller user that the session is being reset and it
might take a few minutes.
- 2
- Reset the session automatically when the Remote Desktop user
logs out.
Note:
- The value set for this property applies to all targets that
are registered with the server. You can set an attribute for
a target group to limit the action to selected targets. For
more information about the attribute, see Creating target groups. If the
server property has a different value to the target group
attribute, the target group value takes precedence for those
targets who are members of the specific target group.
- If a Remote Desktop session (admin or console) is in
progress when the controller attempts to connect to a
target, a message is displayed to the controller. The
message provides details of the Remote Desktop user and the
IP address and computer name that the session is running
from.
|
| Modifiable Field |
follow.active.session |
| Field Description |
If set to Yes, the controller connects to the active session in the
target, even if this session is a Remote Desktop session. This
feature is available in Remote Control v9.1.2 IF0002 and later versions and is supported on the
following Microsoft™
Windows™ operating system versions:
- Microsoft™
Windows™ Vista
- Microsoft™
Windows™ 7
- Microsoft™
Windows™ 8
- Microsoft™
Windows™ 8.1
- Microsoft™
Windows™ 10
This feature is not supported on any server edition of Microsoft™
Windows™. |
| Possible Values |
Yes, No |
| Value Definition |
- Yes
-
Support for Remote Desktop sessions is enabled.
The BigFix®
Remote Control controller connects to the active session
in the target, even if the active session is a Remote
Desktop session.
- No
-
No change in configuration and the controller connects
only to the physical console in the target, even if
there is an active Remote Desktop session.
Note:
The value set for this property applies to all targets that are
registered with the server. You can set an attribute for a
target group to limit the action to selected targets. For more
information about the attribute, see Creating target
groups. If the server property has a different value
to the target group attribute, the target group value takes
precedence for those targets who are members of the specific
target group.
|
target.search.minimum.nonwildcards =
| Modifiable Field |
target.search.minimum.nonwildcards |
| Field Description |
Sets the minimum number of non-wildcard characters that
are allowed to be entered when you search for a target. |
| Possible Values |
User-defined integer, default is 0. |
| Value Definition |
Determines the minimum non-wildcard characters that must
be entered in the search targets field on the search targets page. For
example set to 2 means that at least 2 non-wildcard characters must be
entered. For example, se or
te. If you enter less than the minimum
characters, the following error is displayed on the screen - The
search string must contain at least X
non-wildcard characters.
X is the value set in the property. Note: If
you set view.all.targets.auth to
S or A, you must
set target.search.minimum.nonwildcards to
greater than 1. The reason is to prevent users who have user
authority from using the search targets page to display all targets.
|
target.search.maximum.wildcards =
| Modifiable Field |
target.search.maximum.wildcards |
| Field Description |
Sets the maximum number of wildcard characters that are
allowed to be entered when you search for a target. The wildcard
characters that are allowed are *, %, * and _. |
| Possible Values |
User-defined integer, default is 0. |
| Value Definition |
The value set determines the maximum number of wildcard
characters that you can enter in the search targets field, on the search
targets page. For example, set to 1 means that only 1 wildcard character
can be entered. For example, se* or
te*. If you enter more than the maximum
characters the following error is displayed on the screen - The
number of wildcards in the search string cannot exceed
X
. X is the value set in the property.
|
To reduce the volume of unnecessary heartbeats, the following properties can be
configured.
| Modifiable Field |
heartbeat.retry |
| Field Description |
If a target cannot contact the BigFix® Remote Control
Server, use this property to define the number of minutes that the target
waits before it tries to contact the server again. |
| Possible Values |
User-defined, minutes |
| Value Definition |
Default is 10. |
| Modifiable Field |
heartbeat.delay |
| Field Description |
The maximum delay in minutes that a target waits between
sending heartbeats to the BigFix® Remote Control
Server. |
| Possible Values |
User-defined: minutes |
| Value Definition |
Default is 20 minutes. Prevent multiple heartbeats in
quick succession by delaying the actual heartbeat when a heartbeat is
triggered. |
| Modifiable Field |
heartbeat.on.wake |
| Field Description |
Trigger a heartbeat when the target system wakes from
standby or hibernation. |
| Possible Values |
1 or 0 |
| Value Definition |
- 1
- Trigger a heartbeat when the target system wakes from
standby or hibernation.
- 0
- Do not trigger a heartbeat when the target system wakes from
standby or hibernation. This value is the default
value.
|
heartbeat.on.userchange =
| Modifiable Field |
heartbeat.on.userchange |
| Field Description |
Trigger a heartbeat when a user logs on or off |
| Possible Values |
1 or 0 |
| Value Definition |
- 1
- Trigger a heartbeat when a user logs on or off. This value
is the default value.
- 0
- Do not trigger a heartbeat when a user logs on or off.
|
| Modifiable Field |
heartbeat.on.change |
| Field Description |
Trigger a heartbeat when any of the values included in a
heartbeat change. |
| Possible Values |
1 or 0 |
| Value Definition |
- 1
- Trigger a heartbeat when any of the values included in a
heartbeat change. This value is the default value.
- 0
- Do not trigger a heartbeat when any of the values included
in a heartbeat change. This value is the default value.
|
| Modifiable Field |
heartbeat.on.stop |
| Field Description |
Trigger a heartbeat when the target is stopped or the
system is shutting down |
| Possible Values |
1 or 0 |
| Value Definition |
- 1
- Trigger a heartbeat when the target is stopped or the system
is shutting down.
- 0
- Do not trigger a heartbeat when the target is stopped or the
system is shutting down. This value is the default
value.
Note: HeartBeatOnStop set to 1 is not recommended
unless HeartBeatDelay is set to 0. Otherwise,
remote control sessions cannot be started while the heartbeat is
being delayed.
|
| Modifiable Field |
broker.code.length |
| Field Description |
Determines the number of characters that are required to
be entered for the connection code. Enter the connection code when you
start a remote control session through an internet connection broker.
|
| Possible Values |
User-defined integer. |
| Value Definition |
Default is 7. There is no limit to the number of
characters that can be set. However, you must use your discretion when
you set the value. |
| Modifiable Field |
broker.code.timeout |
| Field Description |
Determines the number of seconds the connection code
timer counts down from before a new code is needed. The timer is
displayed on the controller when you start a remote control session by
using a broker. |
| Possible Values |
User defined. |
| Value Definition |
Default is 900. |
broker.trusted.certs.required =
| Modifiable Field |
broker.trusted.certs.required |
| Field Description |
Determines whether strict certificate validation is
enabled. |
| Possible Values |
true or false. |
| Value Definition |
- true
- Strict certificate validation is enabled. This value is the
default value.
- false
- Strict certificate validation is disabled.
|
rc.recording.filename.format =
| Modifiable Field |
rc.recording.filename.format |
| Field Description |
Specifies the file name format that is used in the server
to store the recordings |
| Possible Values |
User defined. Some formatting variables can be added to
the file name to customize it |
| Value Definition |
For example,
trcrecording_%S_%D_%T.trc
Where %S is placeholder for the session ID of the
recording %D is placeholder for the date of
the recording %T is placeholder for the
time stamp of the recording %H is
placeholder for the host name of the target |
rc.enforce.secure.registration =
| Modifiable Field |
rc.enforce.secure.registration |
| Field Description |
Determines whether secure authentication is required when
targets call home to the server. |
| Possible Values |
true or
false |
| Value Definition |
- true
- Secure target registration is enabled. Secure tokens are
used to authenticate a target when it contacts the server.
This default value is true.
- false
- Secure target registration is disabled.
For more information about secure tokens and how they are used, see
Secure target registration.
|