AWSJOM - Object management messages
This section lists error and warning messages that might be generated by the routines that handle object management.
The message component code is JOM.
AWSJOM001E
A null value was specified for field "field_name". Only not-null values are allowed.
See message.
field_name identifies the field that must not have null values.
The object definition that includes the indicated field is not created or updated.
Retry the operation, specifying a not-null value for each required field.
AWSJOM002E
Null values were specified for field "field_name_1" and field "field_name_2". At least one of these values must be not-null.
See message.
field_name_1 and field_name_2 identify two fields, one of which must not have null values.
The object definition that includes the indicated fields is not created or updated.
Retry the operation, specifying a not-null value for each required field.
AWSJOM003E
Null values were specified for the following fields: "field_name_1", "field_name_2" and "field_name_3". At least one of these values must be not null.
See message.
field_name_1, field_name_2, and field_name_3 identify three fields, one of which must not have null values.
The object definition that includes the indicated fields is not created or updated.
Retry the operation, specifying a not-null value for each required field.
AWSJOM004E
Null values were specified for the following fields: "field_name_1", "field_name_2", "field_name_3" and "field_name_4". At least one of these values must be not null.
See message.
field_name_1, field_name_2, field_name_3, and field_name_4 identify four fields, one of which must not have null values.
The object definition that includes the indicated fields is not created or updated.
Retry the operation, specifying a not-null value for each required field.
AWSJOM011E
The value "field_value" specified for field "field_name" is outside the allowed range. Values must be between "range_start" and "range_end".
See message.
field_name and field_value identify the value that is out-of-range.
range_start and range_end are the minimum and maximum values for this field.
The object definition that includes the indicated field is not created or updated.
Retry the operation, specifying a value for the indicated field that is within the permitted range.
AWSJOM012E
The value "field_value" specified for field "field_name" exceeds the maximum length, which is "max_length".
See message.
field_name and field_value identify the value that is too long.
max_length is the maximum length of the field.
The object definition that includes the indicated field is not created or updated.
Retry the operation, specifying a value for the indicated field that is within the maximum length.
AWSJOM013E
The value "field_value" specified for field "field_name" contains the following character "non-valid_char", which is not allowed.
See message.
field_name and field_value identify the value that includes a non-valid character.
non-valid_char is the non-valid character.
The object definition that includes the indicated field is not created or updated.
Retry the operation, specifying a value for the indicated field that does not contain non-valid characters.
AWSJOM014E
The value "field_value" specified for field "field_name" does not start as expected. Values cannot start with the following character: "non-valid_start".
See message.
field_name and field_value identify the value that starts with a non-valid character.
non-valid_start is the character that cannot be used in the first character of the field.
The object definition that includes the indicated field is not created or updated.
Retry the operation, specifying a value for the indicated field that does not contain a non-valid character in the first position.
AWSJOM015E
The value "field_value" specified for field "field_name" is not allowed or reserved for future use.
The field in question can only take one of a pre-determined set of values, or a specific data type. For example, the field might require a positive number and you have supplied a negative number, or it might require either yes or no and you have supplied a different value.
field_name and field_value identify the value that is not allowed.
The object definition that includes the indicated field is not created or updated.
Retry the operation, specifying a valid value for the indicated field.
AWSJOM016E
The value "field_value" specified for field "field_name" does not contain a valid internet address.
The field in question requires an internet address, but the value supplied is not a valid internet address.
field_name and field_value identify the value that does not contain a valid internet address.
The object definition that includes the indicated field is not created or updated.
Retry the operation, specifying a valid internet address for the indicated field.
AWSJOM017E
The value "field_value_too_low" specified for field "field_name_too_low" cannot be lower than the value "reference_field_value" specified for field "reference_field_name".
See message.
field_name_too_low and field_value_too_low identify the value that must not be lower than the value of the other field referenced.
reference_field_name and reference_field_value identify the reference value.
The object definition that includes the indicated field is not created or updated.
Retry the operation, specifying a valid internet address for the indicated field.
AWSJOM018E
The object specified for field "field_name" is an instance of the object class "wrong_class_name". Only instances of the object class "correct_class_name" are allowed.
See message.
field_name identifies the field that contains a list of objects, among which is an object of an incorrect class.
wrong_class_name identifies the object class which has been incorrectly used for this field.
correct_class_name identifies the object class which is correct for this field.
The object definition that includes the indicated field is not created or updated.
Retry the operation, specifying only objects of the correct object class in the object list for the indicated field.
AWSJOM019E
The instance of object class "wrong_class_name" is not allowed for filter "filter_name". Only instances of object class "correct_class_name" are allowed.
See message.
filter_name identifies the filter that contains an instance of an object of an incorrect class.
wrong_class_name identifies the object class which has been incorrectly used for this filter.
correct_class_name identifies the object class which is correct for this filter.
The query that includes the indicated filter is not run.
Retry the query, specifying only objects of the correct object class in the indicated filter.
AWSJOM020E
A null value is not allowed for filter "filter_name". Only instances of object class "correct_class_name" are allowed.
A null value was specified for a query filter that does not allow null values.
filter_name identifies the filter that contains a null value.
correct_class_name identifies the object class which is correct for this filter.
The query that includes the indicated filter is not run.
Retry the query, specifying only objects of the correct object class in the indicated filter.
AWSJOM021E
The value "field_value" specified for field "field_name" contains the following character "non-valid_char", which is not allowed before and after the character "validation_char".
See message.
field_name and field_value identify the value that includes a non-valid character.
non-valid_char is the non-valid character.
validation_char is the character used to check the non-valid character.
The object definition that includes the indicated field is not created or updated.
Retry the operation, specifying a value for the indicated field that does not contain non-valid characters.
AWSJOM051E
The value "incorrect_field_value" specified for field "incorrect_field_name" is not allowed, because field "reference_field_name" has the value "reference_field_value" and these values for these fields are incompatible.
See message.
incorrect_field_name and incorrect_field_value identify the value that is not correct given the value of the referenced field.
reference_field_name and reference_field_value identify the reference value.
The object definition that includes the indicated field is not created or updated.
Retry the operation, specifying a value for incorrect_field_name that is compatible with the value of reference_field_name.
AWSJOM052E
The value "incorrect_field_value" specified for field "incorrect_field_name" is not allowed, because field "reference_field_name_1" has the value "reference_field_value_1" and field "reference_field_name_2" has the value "reference_field_value_2", and these values for these fields are incompatible.
See message.
incorrect_field_name and incorrect_field_value identify the value that is not correct given the value of the referenced fields.
reference_field_name_1 and reference_field_value_1, and reference_field_name_2 and reference_field_value_2 identify two reference values with which the incorrect field value is not compatible.
The object definition that includes the indicated field is not created or updated.
Retry the operation, specifying a value for incorrect_field_name that is compatible with the value of reference_field_name_1 and reference_field_name_2.
AWSJOM053E
The value "incorrect_field_value" specified for field "incorrect_field_name" is not allowed, because field "reference_field_name_1" has the value "reference_field_value_1", field "reference_field_name_2" has the value "reference_field_value_2", and field "reference_field_name_3" has the value "reference_field_value_3". These values for these fields are incompatible.
See message.
incorrect_field_name and incorrect_field_value identify the value that is not correct given the value of the referenced fields.
reference_field_name_1 and reference_field_value_1, reference_field_name_2 and reference_field_value_2, and reference_field_name_3 and reference_field_value_3 identify three reference values with which the incorrect field value is not compatible.
The object definition that includes the indicated field is not created or updated.
Retry the operation, specifying a value for incorrect_field_name that is compatible with the value of reference_field_name_1, reference_field_name_2, and reference_field_name_3.
AWSJOM101E
The required job stream has not been supplied for job "job_name".
See message.
job_name identifies the job for which you have not supplied a job stream.
The indicated job is not created or updated.
Retry the operation, specifying a job stream.
AWSJOM102E
The required job definition has not been supplied for job "job_name".
See message.
job_name identifies the job for which you have not supplied a job definition.
The indicated job is not created or updated.
Retry the operation, specifying a job definition.
AWSJOM103E
The required calendar has not been supplied for run cycle "run_cycle_name" of type calendar.
See message.
run_cycle_name identifies the run cycle for which you have not supplied a calendar.
The job stream that includes the indicated run cycle is not created or updated.
Retry the operation, specifying a calendar for the indicated run cycle. Alternatively, change the run cycle type to simple or rule.
AWSJOM104E
A calendar has been incorrectly supplied for run cycle "run_cycle_name" of type simple or rule.
See message.
run_cycle_name identifies the run cycle which references a calendar incorrectly.
The job stream that includes the indicated run cycle is not created or updated.
Retry the operation, removing the calendar specification for the run cycle. Alternatively, change the type to simple or rule.
AWSJOM105E
The required host workstation has not been supplied for a workstation that has a workstation type of extended agent, agent, pool, dynamic pool or remote engine.
See message.
The workstation object is not created or updated.
Retry the operation, supplying a host workstation. Alternatively, change the workstation type to standard agent, domain manager, fault-tolerant agent, or broker.
AWSJOM106E
A host workstation has been incorrectly supplied in the definition of a workstation of type fault-tolerant agent or domain manager.
See message.
The workstation object is not created or updated.
Retry the operation, removing the reference to the host workstation. Alternatively, change the workstation type to be extended agent, standard agent, or broker.
AWSJOM107E
A host workstation has been incorrectly supplied for a workstation definition, where the workstation is hosted by the master domain manager.
See message.
The workstation object is not created or updated.
Retry the operation, removing the reference to the host workstation. Alternatively, change the workstation definition so that is not hosted by the master domain manager.
AWSJOM108E
A domain has been incorrectly supplied for the definition of a workstation of type extended agent, agent, pool, dynamic pool or remote engine.
See message.
The workstation is not created or updated.
Retry the operation, removing the reference to the domain. Alternatively, change the workstation type to be standard agent, domain manager, fault-tolerant agent, or broker.
AWSJOM109E
A parent domain has been incorrectly supplied for the definition of a domain because the domain is the master domain, which cannot have a parent.
See message.
The domain is not created or updated.
Retry the operation, removing the reference to the parent domain.
AWSJOM110E
The required workstation or workstation class has not been supplied in this object definition.
See message.
The object is not created or updated.
Retry the operation, supplying a workstation or workstation class.
AWSJOM111E
The required workstation has not been supplied for a workstation link definition.
See message.
The workstation link is not created or updated.
Retry the operation, supplying a workstation.
AWSJOM112E
The required valid network agent has not been supplied for the inter-network dependency defined for job or job stream "object_name".
See message.
object_name identifies the job or job stream for which an inter-network dependency is missing its network agent.
The object definition that includes the indicated dependency is not created or updated.
Retry the operation, supplying an existing network agent for the dependency.
AWSJOM113E
The required resource has not been supplied for the resource dependency defined for job or job stream "object_name".
See message.
object_name identifies the job or job stream for which a resource dependency is missing its resource reference.
The object definition that includes the indicated dependency is not created or updated.
Retry the operation, supplying an existing resource for the dependency.
AWSJOM114E
The required prompt has not been supplied for the prompt dependency defined for job or job stream "object_name".
See message.
object_name identifies the job or job stream for which a prompt dependency is missing its prompt reference.
The object definition that includes the indicated dependency is not created or updated.
Retry the operation, supplying an existing prompt for the dependency.
AWSJOM115E
The required workstation or workstation class has not been supplied for the file dependency defined for job or job stream "object_name".
See message.
object_name identifies the job or job stream for which a file dependency is missing its workstation or workstation class.
The object definition that includes the indicated dependency is not created or updated.
Retry the operation, supplying an existing workstation or workstation class for the dependency.
AWSJOM116E
The required job has not been supplied for the internal dependency defined for job "job_name".
See message.
object_name identifies the job or job stream for which an internal dependency is missing its job reference.
The object definition that includes the indicated dependency is not created or updated.
Retry the operation, supplying an existing job for the dependency.
AWSJOM117E
The required job or job stream has not been supplied for the external dependency defined for job or job stream "object_name".
See message.
object_name identifies the job or job stream for which an external dependency is missing its job or job stream reference.
The object definition that includes the indicated dependency is not created or updated.
Retry the operation, supplying an existing job or job stream for the dependency.
AWSJOM118E
The job "target_job_key" supplied as an internal dependency for job "job_name" does not exist in the job stream "job_stream_key".
See message.
job_stream_key identifies the job stream being validated.
job_name identifies the job for which an internal dependency refers to a job that is not defined in the same job stream.
target_job_key is the job that is not defined in the job stream of job_name.
The object definition that includes the indicated dependency is not created or updated.
Retry the operation, supplying as an internal dependency a job that is already defined in the job stream.
AWSJOM119E
The external dependency defined for job or job stream "object_name" cannot be on both a job and a job stream.
See message.
object_name identifies the job or job stream for which an external dependency has both a job and a job stream defined, which is not allowed.
The object definition that includes the indicated dependency is not created or updated.
Retry the operation, supplying either a job or a job stream, but not both, for the external dependency.
AWSJOM120E
The value specified for the parent domain "parent_domain_name" is not allowed. A domain and its parent cannot have the same name.
See message.
domain_name identifies the domain which has been supplied with its own name as parent domain.
The domain is not created or modified.
Retry the operation, supplying a different domain as the parent domain.
AWSJOM121E
A list of workstations cannot be specified for a workstation class if the class already includes all workstations.
See message.
The workstation class is not created or updated.
Retry the operation, either removing the list of workstations. Alternatively, do not specify all workstations.
AWSJOM122E
The required valid time interval has not been supplied in the definition of dependency resolution "resolution".
See message.
resolution is the rule that is missing a time interval.
The object definition that includes the indicated dependency is not created or updated.
Retry the operation, supplying a time interval for the dependency resolution. Alternatively, change the dependency resolution to a type that does not require a time interval.
AWSJOM123E
A time interval has been incorrectly supplied in the definition of dependency resolution "resolution".
See message. For example, if the dependency resolution is closest preceding, a time interval is not appropriate.
resolution identifies the dependency resolution that has a superfluous time interval.
The object definition that includes the indicated dependency is not created or updated.
Retry the operation, omitting the time interval for the dependency resolution. Alternatively, change the dependency resolution to a type that does not require a time interval.
AWSJOM124E
A variable table has been incorrectly supplied for run cycle "run_cycle_name", which is exclusive.
See message.
run_cycle_name identifies the run cycle which references a variable table incorrectly.
The job stream that includes the indicated run cycle is not created or updated.
Retry the operation, removing the variable table specification for the run cycle. Alternatively, change the run cycle definition from exclusive to inclusive.
AWSJOM125E
An action has not been supplied with the latest start time definition for the following job stream, job or run cycle: "object_name".
See message.
object_name identifies the job stream, job or run cycle that has a latest start time defined without an action.
The object is not created or updated.
Retry the operation, supplying an action with the latest start time for the indicated object. Alternatively, do not supply the latest start time.
AWSJOM126E
A latest start time has not been supplied with the action definition for the following job stream, job or run cycle: "object_name".
See message.
object_name identifies the job stream, job or run cycle that has an action defined without a latest start time.
The object is not created or updated.
Retry the operation, supplying a latest start time with the action for the indicated object. Alternatively, do not supply the action.
AWSJOM127E
The required calendar offset type has not been supplied in the definition of run cycle "run_cycle_name" of type calendar.
See message.
run_cycle_name identifies the run cycle of type calendar that does not have an offset type (days, workdays, or weekdays).
The run cycle is not created or updated.
Retry the operation, supplying a calendar offset type for the indicated run cycle. Alternatively, remove the calendar offset.
AWSJOM128E
A calendar offset has been incorrectly supplied in the definition of run cycle "run_cycle_name" of type simple or rule.
See message.
run_cycle_name identifies the run cycle with a type other than calendar that has an offset specified.
The run cycle is not created or updated.
Retry the operation, omitting the calendar offset for the indicated run cycle. Alternatively, change the run cycle type to calendar.
AWSJOM129E
The required iCalendar definition has not been supplied in the definition of run cycle "run_cycle_name" of type simple or rule.
See message.
run_cycle_name identifies the run cycle of type simple or rule that has not been supplied with an iCalendar definition.
The run cycle is not created or updated.
Retry the operation, specifying an iCalendar definition for the indicated run cycle. Alternatively, change the run cycle type to calendar.
AWSJOM130E
An iCalendar definition has been incorrectly supplied in the definition of run cycle "run_cycle_name" of type calendar.
See message.
run_cycle_name identifies the run cycle of type calendar that has been supplied with an iCalendar definition.
The run cycle is not created or updated.
Retry the operation, omitting the iCalendar definition for the indicated run cycle. Alternatively, change the run cycle type to simple or rule.
AWSJOM131E
The required access method has not been supplied in the definition of a workstation of type extended agent.
See message.
The workstation definition is not created or updated.
Retry the operation, specifying an access method. Alternatively, change the workstation type to domain manager, fault-tolerant agent, standard agent, or broker.
AWSJOM132E
An access method has been incorrectly supplied in the definition of a workstation of type domain manager, fault-tolerant agent, standard agent, or workload broker.
See message.
The workstation definition is not created or updated.
Retry the operation, omitting the specification of an access method. Alternatively, change the workstation type to extended agent.
AWSJOM133E
The required security level has not been supplied in the definition of a workstation of type domain manager, fault-tolerant agent, standard agent, or workload broker.
See message.
The workstation definition is not created or updated.
Retry the operation, specifying the security level. Alternatively, change the workstation type to extended agent.
AWSJOM134E
A security level has been incorrectly supplied in the definition of a workstation of type extended agent, pool, or dynamic pool.
See message.
The workstation definition is not created or updated.
Retry the operation, omitting the security level. Alternatively, change the workstation type to domain manager, fault-tolerant agent, or extended agent.
AWSJOM135E
The required field "field_name" has not been supplied with the definition of Windows user name "full_name".
See message.
field_name is the name of the field (user or domain name) that has not been supplied.
full_name identifies the Windows user for which this field was not supplied.
The Windows user is not created or updated.
Retry the operation, specifying the missing field.
AWSJOM136E
The field "field_name" in the definition of Windows user name "full_name" exceeds the maximum length of "max_length" bytes.
See message.
field_name is the filed that is too long.
max_length is the maximum length of that field.
full_name identifies the Windows user with the field too long.
The Windows user is not created or updated.
Retry the operation, reducing the length of the indicated field.
AWSJOM137E
The job stream "job_stream_key" contains a job with a dependency that would create the following looped dependency chain of jobs: "looped_job_dependency_chain".
See message.
job_stream_key identifies the job stream being validated.
looped_job_dependency_chain is the list of job dependencies which loops.
The job is not created or updated.
Retry the operation, changing the job dependencies so that they do not loop.
AWSJOM138E
The dependencies defined for job or job stream "object_name" are incorrect because they would give a total number of dependencies generated in the plan "total_dependencies" that exceeds the maximum of 40.
See message.
object_name identifies the job or job stream for which the total number of dependencies that would be generated in the plan exceeds the maximum of 40.
total_dependencies is the total number of dependencies that would be generated in the plan.
The job stream is not created or updated.
Retry the operation, removing some of the dependencies, or decrease the quantity assigned to resource dependencies (multiple resource dependencies are created automatically by planner if the assigned quantity on the original dependency is greater than 32).
AWSJOM139E
A resource dependency has been incorrectly defined for both the job stream and for job "job_name".
Resource dependencies can be defined for a job stream or for one of its jobs, but not both.
The object definition that includes the indicated dependency is not created or updated.
Retry the operation, specifying resource dependencies for the job stream or for its jobs, but not both.
AWSJOM140E
The file dependency defined for job or job stream "object_name" is incorrect, because the concatenation of the file path "file_path" and the file qualifier "file_qualifier" is longer than the maximum length of "max_length" bytes.
See message.
file_path identifies the file used in the dependency.
file_qualifier is the supplied qualifier that determines how the file is to be tested to determine the dependency.
max_length is the maximum number of bytes that can be used for the concatenated file path and qualifier.
object_name identifies the job or job stream for which the dependency is defined.
The object definition that includes the indicated dependency is not created or updated.
Retry the operation, defining a file path that, when concatenated with the qualifier, is less than the maximum length. Do not forget to change the physical path of the file being used for the dependency to match what you have defined
AWSJOM141E
The identified job definition is incorrect because it is an instance of a z/OS job definition (ZOSJobDefinition). Only instances of distributed job definitions (DistJobDefinition) are allowed.
A zOS job definition is being used for an operation that expects a distributed job definition.
The object is not created or updated.
Retry the operation, specifying a distributed job definition instead of a zOS job definition, using the appropriate class.
AWSJOM142E
The identified job definition is incorrect, because the concatenation of the task string "task_string" and the return code mapping "return_code_mapping" is longer than the maximum length of "max_length" bytes.
See message.
task_string identifies the task string supplied in the job definition.
return_code_mapping is the return code mapping supplied in the job definition.
max_length is the maximum number of bytes that can be used for the concatenated task string and return code mapping.
The job definition is not created or updated.
Retry the operation, defining a task string that, when concatenated with the return code mapping, is less than the maximum length.
AWSJOM143E
One or more lines in the comment entered for job or job stream "object_name" exceeds the maximum length, which is "max_length".
See message.
object_name identifies the job or job stream whose comment has one or more lines that exceed the maximum length.
max_length is the maximum length of the lines allowed for the comment field.
The object definition that includes the indicated comment is not created or updated.
Retry the operation, breaking the comment text into shorter lines, so that each of them is within the maximum length.
AWSJOM144E
Event rule "object_name" does not define any event condition. At least one event condition must be defined.
See message.
object_name identifies the event rule without any event condition defined.
The event rule is not created or updated.
Retry the operation, supplying at least one event condition in the event rule definition.
AWSJOM145E
Event rule "object_name" of type "event_rule_type" defines multiple event conditions. No more than one event condition must be defined.
See message.
object_name identifies the event rule having multiple event conditions defined.
event_rule_type identifies the type of the event rule.
The event rule is not created or updated.
Retry the operation, supplying no more than one event condition in the event rule definition.
AWSJOM146E
Event rule "object_name" of type "event_rule_type" defines only one event condition. At least two event conditions must be defined.
See message.
object_name identifies the event rule having only one event condition defined.
event_rule_type identifies the type of the event rule.
The event rule is not created or updated.
Retry the operation, supplying at least two event conditions in the event rule definition.
AWSJOM147E
Event rule "object_name" of type "event_rule_type" cannot contain actions with response type "rule_response_type".
See message.
object_name identifies the event rule that has actions with a non-valid response type.
event_rule_type identifies the event rule type.
rule_response_type identifies the response type of the non-valid actions.
The event rule is not created or updated.
Retry the operation, removing invalid actions from the event rule definition.
AWSJOM148E
The timezone "timezone_name" specified for the workstation "workstation_name" is not valid.
See message.
timezone_name identifies the time zone.
workstation_name identifies the workstation.
The workstation is not created or updated.
Retry the operation, modifying the non-valid time zone.
AWSJOM149E
The timezone "timezone_name" specified for the job or job stream "job_or_job_stream_name" is not valid.
See message.
timezone_name identifies the time zone.
job_or_job_stream_name identifies the job or job stream.
The job or job stream is not created or updated.
Retry the operation, modifying the non-valid time zone.
AWSJOM150E
Timezone "timezone_name" specified for the event rule "erule_name" is not valid.
See message.
timezone_name identifies the time zone id specified.
erule_name identifies the event rule name.
The event rule is not created or updated.
Retry the operation, modifying the invalid time zone.
AWSJOM151E
The job stream "job_stream_key" contains the following critical jobs that have neither specific deadline definitions nor inherited deadline definitions from the job stream or the job stream run cycles: "critical_jobs_without_deadlines"
See message.
job_stream_key identifies the job stream that is being validated.
critical_jobs_without_deadlines is the list of critical jobs with missing deadlines.
The job stream is not created or updated.
Retry the operation, after changing the job, job stream or run cycle deadlines so that the job can be defined as critical.
AWSJOM152E
The job stream "job_stream_key" contains a duplicate run cycle name: "run_cycle_name".
See message.
job_stream_keyidentifies the job stream that is being validated.
run_cycle_name is the run cycle name that is duplicated in the job stream.
The job stream is not created or updated.
Check the job stream specification. Ensure that the run cycle information does not contain duplicate run cycle names and retry the operation.
AWSJOM153E
The job stream "job_stream_key" contains a duplicate job name: "job_name".
See message.
job_stream_key identifies the job stream that is being validated.
job_name is the job name that is duplicated in the job stream.
The job stream is not created or updated.
Check the job stream specification. Ensure that the job information does not contain duplicate job names and retry the operation.
AWSJOM154E
The variable table "variable_table_key" contains a duplicate variable name: "variable_name".
See message.
variable_table_key identifies the variable table that is being validated.
variable_name is the variable name that is duplicated in the variable table.
The variable table is not created or updated.
Check the variable table specification. Ensure that the variable information does not contain duplicate variable names and retry the operation.
AWSJOM155E
The availability calendar "calendar_key" contains a duplicate run cycle name: "run_cycle_name".
See message.
calendar_keyidentifies the availability calendar that is being validated.
run_cycle_name is the run cycle name that is duplicated in the availability calendar.
The availability calendar is not created or updated.
Check the availability calendar specification. Ensure that the run cycle information does not contain duplicate run cycle names and retry the operation.
AWSJOM156E
Too many availability calendar intervals.
See message.
AWSJOM157E
Malformed availability calendar interval.
See message.
AWSJOM158E
Missing run cycle type.
See message.
AWSJOM159E
Unexpected exception type definition.
See message.
AWSJOM160E
Negative availability run cycle priority.
See message.
AWSJOM161E
Unexpected job strem related field definition.
See message.
AWSJOM162E
Availability calendar validation failed.
See message.
AWSJOM163E
Availability calendar iCalendar validation failed.
See message.
AWSJOM164E
Availability calendar timezone error.
See message.
AWSJOM165W
Warning: property has a time part. This part will be ignored.
See message.
AWSJOM166E
The required protocol has not been supplied in the definition of a workstation of type agent.
See message.
The workstation definition is not created or updated.
Retry the operation, specifying the protocol.
AWSJOM167E
A protocol has been incorrectly supplied, it is supported only for the definition of a workstation of type agent.
See message.
The workstation definition is not created or updated.
Retry the operation, omitting the security level. Alternatively, change the workstation type to domain manager, fault-tolerant agent, or extended agent.
AWSJOM168E
The property "property" of the workstation "workstation" cannot be modified.
- You can change fault-tolerant agent, standard agent, extended agent, domain manager and dynamic workload broker workstations to any workstation type, with the exception of dynamic agent, pool, dynamic pool, and remote engine.
- You cannot change the type of dynamic agent, pool, dynamic pool, and remote engine.
property identifies the property that cannot be modified.
workstation is the workstation to be validated.
The workstation is not updated.
Select a supported property and retry the operation.
AWSJOM169E
The dependency resolution "resolution" has been incorrectly supplied in the remote job request "request".
See message.
resolution identifies the resolution rule defined in the remote job request incorrectly.
request identifies the alias of job that submitted the request.
The remote job request that includes the indicated dependency resolution is not created or updated.
AWSJOM170E
The type of the application "application" has been incorrectly supplied in the definition of the job "job".
See message.
application identifies the application name defined in the job incorrectly.
job identifies the job that defines the application name.
The remote job request related to the job definition is not created or updated.
AWSJOM171E
The workstation "workstation" of type "workstation_type" is not supported by the selected job definition type. The supported workstation types are: "supported_workstation_type".
You are trying to save a application job plug-in to an unsupported workstation type.workstation is the workstation identifier.
workstation_type is the workstation type.
supported_workstation_type is a list of supported workstation types.
The job definition cannot be saved.
Check the job definition. Choose a supported workstation type and retry the operation.
If the problem persists, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.
AWSJOM172E
The operating system "os_type" of workstation "workstation" is not supported by the selected job definition type. The supported operating systems are: "supported_os".
You are trying to save a application job plug-in to a workstation with an unsupported operating system..os_type is the operating system.
workstation is the workstation identifier.
supported_os is a list of supported operating systems.
The job definition cannot be saved.
Check the job definition. Choose a workstation with a supported operating system and retry the operation.
If the problem persists, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.
AWSJOM173E
Unable to find the application job plug-in with ID "plug-inID".
The application job plug-in you are trying to validate is not present. plug-inID is the application job plug-in's ID.
The job definition cannot be saved.
Verify that you entered the application job plug-in name correctly and retry the operation.
If the problem persists, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.
AWSJOM174E
The COMPLETE_IF_BIND_FAILS return code mapping string is allowed for shadow jobs only.
You are trying to save a job definition with a COMPLETE_IF_BIND_FAILS return code mapping condition. This condition is allowed for shadow jobs only
The job definition cannot be saved.
Check the job definition and replace the RCCONDSUCC condition.
If the problem persists, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.
AWSJOM175E
An incorrect security level has been supplied in the definition of a workstation of type workload broker. Only NONE value is allowed.
See message.
The workstation definition is not created or updated.
Retry the operation, specifying the right security level..
AWSJOM176E
An error occurred defining the workstation "workstation". The workload broker server is currently unreachable.
See message.
The workstation is not created.
Start the workload broker server and retry the operation.
AWSJOM177E
An error occurred getting the definition of the workstation "workstation". The workload broker server is currently unreachable.
See message.
The workstation definition is not created, updated or deleted.
Start the workload broker server and retry the operation.
AWSJOM178E
An error occurred getting the definition of the workstation "workstation". The workload broker server is currently unreachable.
See message.
The workstation definition is not created, updated or deleted.
Start the workload broker server and retry the operation.
AWSJOM179E
An error occurred deleting definition of the workstation "workstation". The workload broker server is currently unreachable.
See message.
The workstation definition is not deleted.
Start the workload broker server and retry the operation.
AWSJOM180E
An error occurred defining the workstation "workstation". The workload broker server is currently unreachable.
See message.
The workstation is not created.
Start the workload broker server and retry the operation.
AWSJOM181E
An error occurred updating the workstation "workstation". The workload broker server is currently unreachable.
See message.
The workstation is not updated.
Start the workload broker server and retry the operation.
AWSJOM182E
An error occurred updating the workstation "workstation". The workload broker server is currently unreachable.
See message.
The workstation is not updated.
Start the workload broker server and retry the operation.
AWSJOM183E
An error occurred updating the workstation "workstation". The workload broker server is currently unreachable.
See message.
The workstation is not updated.
Start the workload broker server and retry the operation.
AWSJOM184E
The value "incorrect_field_value" specified for field "incorrect_field_name" in job "job_key" is not allowed. The pattern "invalid_pattern" is allowed only in password fields.
See message.
job_key identifies the job that is being validated.
incorrect_field_name and incorrect_field_value identify the field that contain the given pattern.
invalid_pattern identify the pattern that is not allowed in the field.
The job definition that includes the indicated field is not created or updated.
Retry the operation, specifying a value for incorrect_field_name that does not contain the pattern invalid_pattern.
AWSJOM185E
The value you specified for the field "field_name" exceeds the maximum length, which is "max_length".
See message.
field_name identifies the field whose value is too long.
max_length is the maximum length of the field.
The product does not create or update the object definition that includes the indicated field.
Specify a value within the maximum length and retry the operation.
AWSJOM186E
The action to be performed when the maximum duration is exceeded has not been specified for the following job: "object_name".
See message.
object_name identifies the job definition.
The job is not created or updated.
Specify the action to be performed when the maximum duration is exceeded for the job indicated, and then retry the operation. Alternatively, do not specify a maximum duration.
AWSJOM187E
The action "action_name" to be performed when the maximum duration of the job: "object_name" is exceeded is not a valid action.
See message.
object_name identifies the job definition.
action_name identifies the action definition.
The job is not created or updated.
Retry the operation specifying one of the following actions: KILL or CONTINUE.
AWSJOM188E
The action to be performed when the minimum duration is reached has not been specified for the following job: "object_name".
See message.
object_name identifies the job definition.
The job is not created or updated.
Specify the action to be performed when the minimum duration is reached for the job indicated, and then retry the operation. Alternatively, do not specify a minimum duration.
AWSJOM189E
The action "action_name" to be performed when the minimum duration of the job: "object_name" is reached is not a valid action.
See message.
object_name identifies the job definition.
action_name identifies the action definition.
The job is not created or updated.
Retry the operation specifying one of the following actions: CONFIRM, ABEND or CONTINUE.
AWSJOM190E
The workstation class specified in the start condition and the workstation class specified in the job stream "job_stream" do not match.
See message.
job_stream identifies the job stream containing the file start condition being validated.
The job stream that includes the start condition is not created nor updated.
Retry the operation, supplying the same workstation class specified in the job stream being modified.
AWSJOM191E
The maximum duration was specified using an expression that is not valid "type_name" for the job: "object_name".
See message.
object_name identifies the job definition.
type_name identifies the way to express the maximum duration.
The job is not created or updated.
Retry the operation specifying one of the following ways to express the maximum duration: PERCENTAGE or MINUTES.
AWSJOM192E
You must specify how to express the minimum duration for the job: "object_name".
See message.
object_name identifies the job definition.
The job is not created or updated.
Retry the operation specifying one of the following ways to express the minimum duration: PERCENTAGE, MINUTES.
AWSJOM193E
The minimum duration was specified using an expression that is not valid: "type_name" for the job: "object_name".
See message.
object_name identifies the job definition.
type_name identifies the way to express the minimum duration.
The job is not created or updated.
Retry the operation specifying one of the following ways to express the minimum duration: PERCENTAGE or MINUTES.
AWSJOM194E
An error occurred while parsing the mapping file at line: "incorrect_line".
An error occurred while importing or replacing a workload application.
The mapping file contains the incorrect line incorrect_line.
The import or replace of the workload application fails.
Modify the incorrect line in the mapping file and retry the operation.
AWSJOM195E
The workload application "batch_application_key" contains a duplicate job stream name: "job_stream_name".
See message.
batch_application_key identifies the workload application that is being validated.
job_stream_name is the job stream name that is duplicated in the workload application.
The workload application is neither created nor updated.
Check the workload application specification. Ensure that the workload application information does not contain duplicate job stream names and retry the operation.
AWSJOM196E
The required run cycle group has not been supplied for run cycle "run_cycle_name".
See message.
run_cycle_name identifies the run cycle for which you have not supplied a calendar.
The job stream that includes the indicated run cycle is not created or updated.
Retry the operation, specifying a calendar for the indicated run cycle. Alternatively, change the run cycle type to simple or rule.
AWSJOM197E
The run cycle group "runcycle_group_key" must contain at least one run cycle.
See message.
runcycle_group_key identifies the run cycle group that is being validated.
The run cycle group is neither created nor updated.
Check the run cycle group specification. Ensure that the run cycle group information contains at least one run cycle and retry the operation.
AWSJOM198E
A repeat end time has not been supplied with the repeat interval definition for the following job stream, job or run cycle: "object_name".
See message.
object_name identifies the job stream, job or run cycle that has a repeat interval defined without a repeat end time.
The object is not created or updated.
Retry the operation, supplying an repeat end time with the repeat intervalfor the indicated object. Alternatively, do not supply the repeat interval.
AWSJOM199E
A repeat interval has not been supplied with the repeat end time definition for the following job stream, job or run cycle: "object_name".
See message.
object_name identifies the job stream, job or run cycle that has a repeat end time defined without a repeat interval.
The object is not created or updated.
Retry the operation, supplying a repeat interval with the repeat end time for the indicated object. Alternatively, do not supply the repeat end time.
AWSJOM200E
The supplied sched time is later than the supplied repeat end time definition for the following job stream, job or run cycle: "object_name".
See message.
object_name identifies the job stream, job or run cycle that has a sched time that is greater than the supplied repeat end time.
The object is not created or updated.
Retry the operation, supplying a repeat end time that is greater then the provied sched time. Alternatively, do not supply the repeat end time.
AWSJOM201E
The value "incorrect_field_value" specified for field "incorrect_field_name" in job "job_key" is not allowed. The error is: "error_msg".
See message.
job_key identifies the job that is being validated.
incorrect_field_name and incorrect_field_value identify the field that contain the given pattern.
error_msg identifies the cause of the failure.
The job definition that includes the indicated field is not created or updated.
Retry the operation, specifying a valid value for incorrect_field_name.
AWSJOM202E
A repeat interval has been incorrectly supplied in the definition of run cycle group "rcg".
See message.
rcg identifies the run cycle group that has a repeat interval.
The object is not created or updated.
Retry the operation, omitting the repeat interval.
AWSJOM203E
A repeat end time has been incorrectly supplied in the definition of run cycle group "rcg".
See message.
rcg identifies the run cycle group that has a repeat end time.
The object is not created or updated.
Retry the operation, omitting the repeat end time.
AWSJOM204E
A repeat interval has been incorrectly supplied in the definition of run cycle "rc".
See message.
rc identifies the run cycle that has a repeat interval.
The object is not created or updated.
Retry the operation, omitting the repeat interval.
AWSJOM205E
A repeat end time has been incorrectly supplied in the definition of run cycle "rc".
See message.
rcg identifies the run cycle that has a repeat end time.
The object is not created or updated.
Retry the operation, omitting the repeat end time.
AWSJOM206E
A conditional dependency for job stream "js" refers to an output condition that is not defined in the database.
See message.
js identifies the job stream that contains a conditional dependency.
The object is not created nor updated.
Retry the operation, omitting the conditional dependency.
AWSJOM207E
The set of joined conditional dependencies defined for job or job stream "object_name" is incorrect because the resulting number of joined conditional dependencies in the plan "total_dependencies" exceeds the maximum supported value of "supported_dependencies".
See message.
object_name identifies the job or job stream for which the total number of joined conditional dependencies generated in the plan exceeds the maximum supported value of 8.
total_dependencies is the total number of joined conditional dependencies that would be generated in the plan.
supported_dependencies is the maximum supported number of joined conditional dependencies that can be generated in the plan.
The job stream is not created nor updated.
Retry the operation, removing some of the joined conditional dependencies.
AWSJOM208E
The name of a set of joined conditional dependencies must be unique. The specified name "object_name" already exists.
See message.
object_name identifies the duplicated name of the set of joined conditional dependencies.
The job stream is not created nor updated.
Retry the operation, removing the duplicated conditional join or renaming it.
AWSJOM209E
Conditional dependency predecessors must be unique. The conditional dependency predecessor "predecessor_key" specified for "object_name" already exists.
See message.
predecessor_key identifies the duplicated conditional dependency predecessor.
object_name identifies the object where the conditional dependency is specified.
The job stream is not created nor updated.
Retry the operation, removing the duplicated conditional dependency predecessor or renaming it.
AWSJOM210E
A conditional dependency for job stream "js" refers to an output condition "out_cond" that is not defined in the job "job".
See message.
js identifies the job stream that contains a conditional dependency.
out_cond identifies the undefined output condition name.
job identifies the job where the output condition should be defined.
The object is not created nor updated.
Retry the operation, omitting the conditional dependency.
AWSJOM211E
The access control list "acl" cannot be empty.
See message.
The access control list is not created or updated.
Retry the operation, specifying a user and a role
AWSJOM212E
The following success condition comparison expression is missing one of a pair of parentheses: "expression".
You have issued a job definition with an incorrect comparison expression for defining the return code or codes that indicate a successful completion of a job.
expression is the comparison expression with the unmatched parenthesis.
The job definition that contains the incorrect expression cannot be used.
Check the syntax of the expression using the Reference Manual, and match the pairs of opening and closing parentheses.
An example of a correctly-formed definition is as follows:rccondsucc (RC=3) OR ((RC>=5) AND (RC<10))
Resubmit the job definition.
AWSJOM213E
The success condition comparison expression either contains an unsupported operator or an operator used incorrectly: "operator".Note that = < > != <> >= <= are comparison operators and they can be used for comparison expressions. AND OR NOT are logical operators and they can be used for boolean expressions, however, NOT is a unary operator.
You have submitted a job definition with an incorrect comparison expression for defining the return code or codes that indicate a successful completion of a job.
Operator is the unsupported operator.
- = (equal to)
- < (less than)
- > (greater than)
- != (not equal to)
- <> (not equal to)
- >= (not less than)
- <= (not greater than)
- AND (boolean)
- OR (boolean)
- NOT (boolean)
The job definition that contains the incorrect expression cannot be used.
Correct the expression to contain only valid operators and resubmit the job definition.
An example of a correctly-formed definition is as follows:rccondsucc (RC=3) OR ((RC>=5) AND (RC<10))
AWSJOM214E
The following output condition comparison expression is incorrect: "expression".
You have issued a job definition with an incorrect comparison expression for defining the return code or codes that indicate a successful completion of a job.
expression is the comparison expression that is incorrect.
The job definition that contains the incorrect expression cannot be used.
Check the syntax of the expression using the Reference Manual, and correct it.
An example of a correctly-formed expression is as follows:(RC=3) OR ((RC>=5) AND (RC<10))
Resubmit the job definition.
AWSJOM215E
The success condition comparison expression contains the following non-valid operand: "operand". The operand must be an integer between -2147483647 and 2147483647.
You have issued a job definition with an incorrect comparison expression for defining the return code or codes that indicate a successful completion of a job.
Operand is the incorrect operand.
The job definition that contains the incorrect expression cannot be used.
Change the operand in the job definition to an integer.
An example of a correctly-formed definition is as follows:rccondsucc (RC=3) OR ((RC>=5) AND (RC<10))
Resubmit the job definition.
AWSJOM216E
Syntax error in job key "job key".
The job key format is invalid.
The operation is not performed.
Change the job key.
AWSJOM217E
The string specified for the object definition to be created does not contain a properly formed object definition.
See message.
The object is not created or updated in the database.
Verify the string that you specified for the object definition.
AWSJOM218E
The string specified for the object definition to be created does not contain a properly formed workload application template definition.
See message.
The object is not created or updated in the database.
Verify the string that you specified for the object definition.
AWSJOM219E
The following error occurred: "parser error message"
The string specified for the object definition to be created contains a syntax error.
The object is not created or updated in the database.
Verify the string that you specified for the object definition.
AWSJOM220E
The value "field_value" specified for field "field_name" is outside the allowed range. Values must be between "range_start" and "range_end".
See message.
field_name and field_value identify the value that is out-of-range.
range_start and range_end are the minimum and maximum values for this field.
The object definition that includes the indicated field is not created or updated.
Retry the operation, specifying a value for the indicated field that is within the permitted range.
AWSJOM221E
The string specified for the object definition to be created does not contain a properly formed job stream definition.
See message.
The object is not created or updated in the database.
Verify the string that you specified for the object definition.
AWSJOM222E
The string specified for the object definition to be created does not contain a properly formed job definition.
See message.
The object is not created or updated in the database.
Verify the string that you specified for the object definition.
AWSJOM223E
The string specified for the object definition to be created does not contain a properly formed runcycle group definition.
See message.
The object is not created or updated in the database.
Verify the string that you specified for the object definition.
AWSJOM224E
The string specified for the object definition to be created does not contain a properly formed one.
See message.
The object is not created or updated in the database.
Verify the string that you specified for the object definition.
AWSJOM225E
Conditional dependency output conditions must be unique. The output condition "outcond_name" specified for "object_name" already exists.
See message.
outcond_name identifies the duplicated conditional dependency output condition.
object_name identifies the object where the conditional dependency is specified.
The job stream is not created nor updated.
Retry the operation, removing the duplicated conditional dependency output condition or renaming it.
AWSJOM226E
The string specified for the object definition to be created contains an incorrect folder definition.
See message.
The object is not created or updated in the database.
Verify the string that you specified for the object definition.
AWSJOM227E
The value specified for the parent folder identifier "parent_folder_id" is incorrect. A folder and its parent cannot have the same identifier.
See message.
parent_folder_id identifies the parent folder identifier which has been supplied in error.
The folder is not created or modified.
Retry the operation, supplying a different folder identifier as the parent folder.
AWSJOM228E
The access control list item "acl_item" is incorrect: you must specify a user or group followed by a list of one or more rules.
See message.
The access control list is not created or modified.
Retry the operation, supplying a valid access control list item.
AWSJOM900E
The workstation "workstation" provided for the start condition of type file does not exist.
See message.
workstation_name identifies the workstation being validated.
The job stream that includes the workstation_name is not created nor updated.
Retry the operation, supplying a workstation that is already defined.
AWSJOM901E
Login information is mandatory for the selected workstation "workstation_name".
See message.
workstation_name identifies the worktation where the file start condition is scheduled to run.
The job stream that includes the specified user is not created nor updated.
Retry the operation, supplying the required login information.
AWSJOM902E
Workstation information is mandatory in the definition of file start condition in job stream "job_stream".
See message.
job_stream identifies the job stream containing the file start condition being validated.
The job stream that includes the file start condition is not created nor updated.
Retry the operation, supplying the required workstation information.
AWSJOM903E
The interval specified in the definition of job start condition in job stream "job_stream" must be greater than 0.
See message.
job_stream identifies the job stream of the start condition being validated.
The job stream that includes the start condition is not created or updated.
Retry the operation, supplying an interval greater than 0.
AWSJOM905E
The interval specified in the definition of job "job" in job stream "job_stream" must be greater than 0.
See message.
job identifies the job being validated.
job_stream identifies the job stream of the job being validated.
The job stream that includes the job is not created or updated.
Retry the operation, supplying an interval greater than 0.
AWSJOM906E
The job "target_job_key" specified in the start condition of type job in "job_stream" does not exist.
See message.
job_stream identifies the job stream containing the job start condition being validated.
The job stream that includes the job start condition is not created nor updated.
Retry the operation, providing a valid job name.
AWSJOM907E
The job start condition "job_start_condition" does not contain a value for the mapping condition.
You must specify a value for the mapping condition.
job_start_condition identifies the job start condition being validated.
The job stream that includes the job start condition is not created nor updated.
Retry the operation, providing a valid value for the mapping condition.
AWSJOM908E
The job start condition "job_start_condition" contains mapping condition longer than 256 character.
See message.
job_start_condition identifies the job start condition being validated.
The job stream that includes the job start condition is not created nor updated.
Retry the operation, providing a mapping condition shorter than 256 characters.
AWSJOM911E
You have specified a deadline action for job "job_name" but the related deadline offset is empty.
See message.
job_name identifies the job name in error.
The job stream containing the job is not created nor updated.
Retry the operation, supplying a dead line offset not null for the indicated object.
AWSJOM912E
You have specified a deadline offset for job "job_name" but the related deadline action is different from SUPPRESS.
The only supported action for the deadline action is SUPPRESS.
job_name identifies the job name in error.
The job stream containing the job is not created nor updated.
Retry the operation, providing a valid deadline action.
AWSJOM913E
The job "job_name" contains polling condition longer than "max_length" character.
See message.
job_name identifies the job being validated.
max_length maximum length.
The job stream that includes the job is not created nor updated.
Retry the operation, providing a polling condition shorter than 256 characters.
AWSJOM914E
The value "number_value" exceeds the maximum allowed size.
See message.
number_value identifies the incorrect value.
The object is not created nor updated.
Retry the operation, specifying a size of lesser value.
AWSJOM915E
Syntax error at line "line_number", starting from position "start_position" to "end_position": "error_msg"unexpected token "unexpected_token" found.
See message.
line_number identifies the line number where the error occurs.
start_position identifies the start position where the error occurs.
end_position identifies the end position where the error occurs.
error_msg identifies the line in error.
unexpected_token identifies the incorrect value.
The object is not created or updated in the database.
Correct the string specified for the object definition and retry the operation.
AWSJOM916E
Syntax error at line "line_number", starting from position "start_position" to "end_position": "error_msg"unexpected token found.
See message.
line_number identifies the line number where the error occurs.
start_position identifies the start position where the error occurs.
end_position identifies the end position where the error occurs.
error_msg identifies the line in error.
The object is not created or updated in the database.
Correct the string specified for the object definition and retry the operation.
AWSJOM917E
Syntax error at line "line_number", starting from position "start_position": "error_msg"missing token.
See message.
line_number identifies the line number where the error occurs.
start_position identifies the start position where the error occurs.
error_msg identifies the line in error.
The object is not created or updated in the database.
Correct the string specified for the object definition and retry the operation.
AWSJOM918E
Syntax error at line "line_number", starting from position "start_position": "error_msg"missing token, found "missing_token".
See message.
line_number identifies the line number where the error occurs.
start_position identifies the start position where the error occurs.
error_msg identifies the line in error.
missing_token identifies the missing value.
The object is not created or updated in the database.
Correct the string specified for the object definition and retry the operation.
AWSJOM919E
The "first_time_zone_definition" differs from "second_time_zone_definition" for "job_or_job_stream". A time zone need be specified just once, or all instances of it must be equal.
A time zone need only be specified once in a job or job stream definition. If you choose to specify it more than once, all instances of the time zone definition must be equal.
Note: a job can have a different time zone definition than that of its job stream.
first_time_definition is one of the time definitions.
second_time_definition is another time definition that has a different time zone specification.
job_or_job_stream identifies the job or job stream that cannot be scheduled.
The job or job stream cannot be scheduled.
Correct the job or job stream definition so that either the time zone specification occurs only once, or so that each time definition has exactly the same time zone specification. Note that a job can have a different time zone definition than that of its job stream.
Use composer to reschedule the job or job stream.