AWSFAB - Installation messages (twsinst)

This section lists error and warning messages that might be issued when using the twsinst script to install the product.

The message component code is FAB.

AWSFAB003E

The twsinst script cannot run on this operating system: "operating_system".

See message text.

The twsinst script cannot proceed.

Check in the HCL Workload Automation Release Notes for details of supported platforms.

HCL Workload Automation Release Notes and HCL Workload Automation: Planning and Installation Guide

AWSFAB004E

Only the user root can run the twsinst script.

See message text

The twsinst script cannot proceed.

Login as the root user and rerun the twsinst script.

AWSFAB005E

No parameters have been specified for twsinst.

The twsinst script needs to be supplied with at least one parameter.

The twsinst script cannot proceed.

Check the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to the see a list of the available parameters.

Rerun the twsinst script, supplying the correct parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB007E

The supplied installation type parameter is not correct. It must be one of the following: -new, -update, -uninst, -modify, -restore.

See message text.

The twsinst script cannot proceed.

Check the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to the see a list of the available parameters.

Rerun the twsinst script, supplying the correct parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB008E

You supplied more than one installation type parameter. Supply only one of the following: -new, -update, -uninst, -modify, -restore.

See message text.

The twsinst script cannot proceed.

Check the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to the see a list of the available parameters.

Rerun the twsinst script, supplying the correct parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB009E

A parameter to twsinst has been supplied that is not appropriate for the supplied installation type. Specify the "installation_parameter" parameter only when "installation_type" installation type is specified.

The installation_parameter is a parameter that you supplied, that is not appropriate for the supplied installation type.

The installation_type is a list of the only installation types with which you can use the supplied installation_parameter.

The twsinst script cannot proceed.

Check the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to the see a list of the available parameters.

Rerun the twsinst script, supplying the correct parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB010E

An incorrect value has been supplied for a parameter. The parameter must be as follows: "installation_parameter".

The parameter you have supplied is correct, and is valid for this installation type. However, the value supplied for the parameter is not correct.

The twsinst script cannot proceed.

Check the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to the see a list of the available parameters.

Rerun the twsinst script, supplying the correct parameter value.

HCL Workload Automation: Planning and Installation Guide

AWSFAB011E

The following parameter has been supplied more than once:"installation_parameter".

See message text.

The twsinst script cannot proceed.

Check the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to the see a list of the available parameters.

Rerun the twsinst script, supplying the correct parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB012E

The installation parameter specified, "installation_parameter", is not supported for the installation type "installation_type".

See message text.

The twsinst script cannot proceed.

Check the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to the see a list of the available parameters.

Rerun the twsinst script, supplying the correct parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB014E

The following is not a recognizable installation parameter "installation_parameter".

See message text.

The twsinst script cannot proceed.

Check the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to the see a list of the available parameters.

Rerun the twsinst script, supplying the correct parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB015E

The "parameter_name" option is missing.

The indicated parameter is required for this installation type.

The twsinst script cannot proceed.

Check the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to the see a list of the available parameters.

Rerun the twsinst script, supplying the correct parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB016E

The following user account has been supplied that does not exist on the local computer: "user_account". You must create the user account before running twsinst.

See message text.

The twsinst script cannot proceed.

Check that the correct account name was supplied. If it was not, rerun the twsinst script, supplying the correct account name.

If the correct account name was supplied, create the account before rerunning the twsinst script.

AWSFAB017E

The script was unable to locate the home directory of the specified user: "user_account".

HCL Workload Automation is installed in the home directory of the TWSUser. The installation script cannot locate the home directory of user you have nominated as the TWSUser.

The twsinst script cannot proceed.

Rerun the twsinst script, specifying the home directory of the TWSUser using the inst_dir parameter.

If in doubt, check the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to the see a list of the available parameters.

HCL Workload Automation: Planning and Installation Guide

AWSFAB018E

The script was unable to locate the home directory of the specified user, and the installation directory has not been supplied. Supply the installation directory explicitly using the following parameter: "parameter_name".

See message text.

The twsinst script cannot proceed.

Rerun the twsinst script, specifying the home directory of the TWSUser using the indicated parameter.

If in doubt, check the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to the see a list of the available parameters.

AWSFAB019E

The supplied target installation directory "directory_name" does not exist.

The home directory of the TWSUser must exist before running the installation.

The twsinst script cannot proceed.

Create the home directory of the TWSUser and then rerun the twsinst script.

AWSFAB020E

You are upgrading HCL Workload Automation, but the twsinst script cannot locate the configuration file "configuration_file"of the version you are upgrading.

See message text.

The twsinst script cannot proceed.

Locate the indicated configuration file and move it to the correct directory (see the documentation for the version you are upgrading for the exact location of the configuration file). Then rerun the twsinst script.

AWSFAB021E

You are trying to run an "installation_type" installation but the installation script has not found the HCL Workload Automation configuration files belonging to the existing instance.

See message text.

The twsinst script cannot proceed.

You can do one of the following:

  • Either locate the configuration files (localopts and globalopts) and move them into the TWSHome directory before rerunning the twsinst script.
  • Or, change the installation type to -new or -uninst, as appropriate, and rerun the installation.

AWSFAB022E

You are running a fresh installation but the installation script has found a previous instance of HCL Workload Automation, or at least one previously installed HCL Workload Automation configuration file, in the following directory: "directory_name".

You cannot install more than one instance of HCL Workload Automation on the same directory. If you want to perform a fresh installation into a directory that previously contained HCL Workload Automation, you must first remove any existing HCL Workload Automation configuration files.

The twsinst script cannot proceed.

You can do one of the following:

  • Either uninstall the existing instance of HCL Workload Automation and then rerun the twsinst script as a fresh installation.
  • Or, change the installation type to -update, -uninst, or -restore, as appropriate, and rerun the installation.
  • Rename, backup, or delete all the old HCL Workload Automation configuration files.

AWSFAB023E

You are trying to run a fresh installation but the installation script has found one or both of the HCL Workload Automation configuration files in the following directory: "directory_name".

This message might indicate that a previous uninstallation of HCL Workload Automation did not complete correctly.

The twsinst script cannot proceed.

You can do one of the following:

  • Either uninstall the existing instance of HCL Workload Automation and then rerun the twsinst script as a fresh installation. If you have already uninstalled the product, check the home directory of the TWSUser, and delete any files and directories there that belong to HCL Workload Automation.
  • Or, change the installation type to -update, -uninst, or -restore, as appropriate, and rerun the installation.

AWSFAB024E

You are performing a fresh installation, but the installation script has found a previous instance of HCL Workload Automation in the registry file. The instance belongs to the following user:"user_name" and is in the registry file: "registry_file_name".

This message might indicate that a previous uninstallation of HCL Workload Automation did not complete correctly.

The twsinst script cannot proceed.

You can do one of the following:

  • Either uninstall the existing instance of HCL Workload Automation and then rerun the twsinst script as a fresh installation.
  • Or, change the installation type to -update, -uninst, or -restore, as appropriate, and rerun the installation.
  • Or, edit the indicated registry file to delete the previous registry keys. See the chapter on troubleshooting the installation for a description of the registry keys.
The chapter on troubleshooting the installation in this manual.

AWSFAB025E

You are updating or uninstalling, but the installation script cannot find an instance of the product in the HCL Workload Automation registry file. The registry file: "registry_file_name" must contain an entry belonging to the following user: "user_name". Try to regenerate the installation registry running the command with the -recovInstReg option.

See message.

The script does not proceed.

Try to regenerate the installation registry running the command with the -recovInstReg option.

AWSFAB026E

The following parameter: "first_parameter" cannot be used with the following parameter: "second_parameter".

See message text.

The twsinst script cannot proceed.

Check the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to the see a list of the available parameters.

Rerun the twsinst script, supplying the correct parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB027E

The installation was unable to retrieve the following parameter: "parameter" from the following HCL Workload Automation configuration file: "configuration_file".

See message text.

The twsinst script cannot proceed.

Check the indicated configuration file.

  • If the file is corrupt or unreadable, and you have no good backup of it, you must uninstall HCL Workload Automation and make a fresh installation of it.
  • If the file is readable but the indicated parameter is absent, you can add it, and rerun the twsinst script.
  • If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSFAB029W

The supplied port number "port_number" is normally used by other services, such as ftp, or telnet, but will be used.

See message text.

The twsinst script proceeds using the port number you supplied.

After the installation has completed, you might decide to change the port number to a different value by editing the localopts file. The default value for HCL Workload Automation is 31111, but you can use any value between 1 - 65535 that is not being used by another application or service.

AWSFAB030E

The supplied company name too long. The limit is 40 bytes.

See message text.

The twsinst script cannot proceed.

Rerun the twsinst script, supplying a value for the company parameter which is not more than 40 bytes.

AWSFAB031E

You can not promote an agent from "original_agent_type" to "promoted_agent_type".

You can only promote a lower type of agent to a higher type. For example, you can promote a standard agent to a fault-tolerant agent, but not a fault-tolerant agent to a standard agent. If you need to do the latter, uninstall the previous agent and make a fresh installation of the new agent.

The twsinst script cannot proceed.

Either promote a different agent or uninstall the previous agent and make a fresh installation of the new agent.

AWSFAB032E

The installation script was unable to obtain the name of the TWSuser group from the following component file of the existing instance of HCL Workload Automation: "component_file_name".

See message text.

The twsinst script cannot proceed.

Check the indicated component file.

  • If the file is corrupt or unreadable, and you have no good backup of it, you must uninstall HCL Workload Automation and make a fresh installation of it.
  • If the file is readable but the indicated TWSUser group name is absent, you can add it, and rerun the twsinst script.
  • If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSFAB035E

The installation has failed. For more details see the log file: "log_file_name".

An internal error has occurred that has caused the installation to fail.

The twsinst script cannot proceed.

Look in the log file for messages that indicate the cause of the failure. If you are able to identify and resolve the problem, rerun the installation.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSFAB036E

The uninstallation has failed. For more details see the log file: "log_file_name".

An internal error has occurred that has caused the uninstallation to fail.

The twsinst script cannot proceed.

Look in the log file for messages that indicate the cause of the failure. If you are able to identify and resolve the problem, rerun the uninstallation.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSFAB037E

The twsinst script is being run from the wrong directory.

You are attempting to install HCL Workload Automation on a UNIX platform using the twsinst utility copied from the installation CD to the home directory of the user that you have nominated as the TWSuser during the installation. This is not allowed.

You can run twsinst from any of the following places:

  • The HCL Workload Automation CD
  • A disk image of the CD
  • A copy of the twsinst utility and its associated files placed in any local directory other than the home directory of the user that you have nominating as the TWSuser in the twsinst parameters.

The twsinst script cannot proceed.

Rerun the installation from a permitted directory.

AWSFAB039E

The installation script was not able to locate the following file needed set up the installation environment: "file_name."

See message text.

The twsinst script cannot proceed.

If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSFAB040E

The installation script has been run from the wrong directory. Rerun the script from the following directory:"directory_name".

You have run the twsinst script from the home directory of a different user than that identified in the -uname parameter. If you wanted that the user identified in the -uname parameter is the TWSUser, run the installation from that user's home directory.

directory_name is the home directory of the user identified in the -uname parameter.

The twsinst script cannot proceed.

Rerun the twsinst installation script from the indicated directory.

AWSFAB041E

The installation script has detected that at least one HCL Workload Automation process is running. No processes can be running when you perform an installation, upgrade, promotion, restore or uninstallation.

See message text.

The twsinst script cannot proceed.

Follow the instructions in HCL Workload Automation: Administration and Troubleshooting to shut down all HCL Workload Automation processes.

HCL Workload Automation: Administration and Troubleshooting

AWSFAB042E

The installation script has detected that at least one HCL Workload Automation process is running. No processes can be running when you perform an installation, upgrade, promotion, restore or uninstallation.

See message text.

The twsinst script cannot proceed.

Follow the instructions in HCL Workload Automation: Administration and Troubleshooting to shut down all HCL Workload Automation processes.

AWSFAB043W

At least one warning message has been issued during the installation.

See message text.

The twsinst script proceeds.

Check the install log file and read the warning message or messages.

AWSFAB044W

At least one warning message has been issued during the uninstallation.

See message text.

The twsinst script proceeds.

Check the install log file and read the warning message or messages.

AWSFAB046E

An inconsistent parameter has been used. You cannot specify the "parameter1" parameter when the "parameter2" parameter has been specified.

See message text.

The twsinst script cannot proceed.

Check the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to the see a list of the available parameters.

Rerun the twsinst script, supplying the correct parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB047E

An inconsistent parameter has been used. When the parameter -cputype "agent_type" is specified, the <cpuname> provided with the -thiscpu and the -master parameters must be different.

See message text.

The twsinst script cannot proceed.

Check the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to the see a list of the available parameters.

Rerun the twsinst script, supplying the correct parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB048E

The company name cannot contain blank characters (spaces).

See message text.

The twsinst script cannot proceed.

Rerun the twsinst script, supplying a company name that does not contain blank characters (spaces).

AWSFAB049E

The installation directory cannot contain blank characters (spaces).

If you did not specify the installation directory explicitly, it means that the home directory of the TWSuser contains blank characters (spaces).

The twsinst script cannot proceed.

If you have explicitly supplied the installation directory, rerun the twsinst script, supplying an installation directory that does not contain blank characters (spaces).

If the home directory of the TWSuser contains blank characters (spaces), choose another user as the TWSuser, or change the name of the home directory of the TWSuser to not contain blank characters (spaces).

AWSFAB050E

The following parameter: "parameter" cannot contain more than "number"bytes.

See message text.

The twsinst script cannot proceed.

Rerun the twsinst script, supplying the indicated parameter with a value not more than that indicated.

AWSFAB055E

The supplied installation type parameter is not correct. It must be one of the following: -new, -uninst, -update.

See message text.

The installAgent script cannot proceed.

Check the usage of the installAgent script by referring to the installation instructions,, or use the command installAgent -u to the see a list of the available parameters and their values.

Rerun the installAgent script, supplying the correct parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB094E

The -restore parameter cannot be used either because the previous instance of HCL Workload Automation has not yet been modified or because the new installation has completed successfully.

The -restore parameter is only used to restore a backed-up version of a previous instance of HCL Workload Automation where an upgrade or promotion has failed, and you want to return to that previous instance.

The twsinst script cannot proceed.

Check the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to the see a list of the available parameters.

Rerun the twsinst script, supplying the correct parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB095E

A parameter is missing. Rerun the installation script, adding the following parameter: "parameter_name".

See message text.

The twsinst script cannot proceed.

Check the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to the see a list of the available parameters.

Rerun the twsinst script, adding the missing parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB098E

The values specified for -master and -thiscpu cannot be the same.

If you are trying to install a master domain manager you do not supply the -master parameter. If you are trying to install a different type of agent, the -thiscpu parameter must identify the computer where you are installing the agent, and the -master parameter must identify the workstation that is its master domain manager.

The twsinst script cannot proceed.

Rerun the twsinst script, supplying different values for the -master and -thiscpu parameters.

AWSFAB099E

You have identified an instance of HCL Workload Automation that is a master domain manager, a backup master domain manager, a dynamic domain manager, a backup dynamic domain manager, an agent with a distributed connector, an agent integrated with a Dynamic Workload Console or a HCL Workload Automation for z/OS connector. You cannot upgrade or install any of these using twsinst.

Using twsinst you can upgrade or uninstall only the following components:
  • A standard agent to a fault-tolerant agent.
  • A fault-tolerant agent to a fault-tolerant agent
  • A fault-tolerant agent to a domain manager or a backup domain manager
  • A domain manager or backup domain manager to a domain manager or a backup domain manager
  • A dynamic agent to a dynamic agent.
  • A HCL Workload Automation for z/OS agent to a HCL Workload Automation for z/OS agent.

The twsinst script cannot proceed.

If you want to upgrade or uninstall a master domain manager, a backup master domain manager, a dynamic domain manager, or a backup dynamic domain manager use the installation wizard or a silent installation.

If you want to upgrade an agent with a distributed connector installed using twsinst, you must first uninstall the distributed connector using the installation wizard or a silent installation and than run twsinst again.

If you want to upgrade an agent integrated with a Dynamic Workload Console you must first uninstall the Dynamic Workload Console using the installation wizard or a silent installation or upgrade the Dynamic Workload Console to the version 9.4, uninstall the old version of the Dynamic Workload Console and upgrade the agent using twsinst.

If you want to upgrade an agent integrated with a HCL Workload Automation for z/OS connector installed using twsinst script, you must first uninstall the HCL Workload Automation for z/OS connector using the installation wizard or a silent installation and run twsinst again.

If you want to upgrade or uninstall one of the agents listed above, choose an instance on which you installed one of them and rerun the twsinst script again.

HCL Workload Automation: Planning and Installation Guide

AWSFAB100E

The script was unable to copy the file maestro.tar.gz to the HCL Workload Automation home directory (TWSHome).

See message text.

The twsinst script cannot proceed.

Check that there is sufficient space available on the file system of the HCL Workload Automation home directory (TWSHome). Check that the user performing the installation has write access to TWSHome. Resolve any problem you find and rerun the script.

AWSFAB101E

The script was unable to copy the file maestro.tar.z to the HCL Workload Automation home directory (TWSHome).

See message text.

The twsinst script cannot proceed.

Check that there is sufficient space available on the file system of the HCL Workload Automation home directory (TWSHome). Check that the user performing the installation has write access to TWSHome. Resolve any problem you find and rerun the script.

AWSFAB102E

The script was unable to expand the file maestro.tar.gz in the HCL Workload Automation home directory (TWSHome).

See message text.

The twsinst script cannot proceed.

Check that there is sufficient space available on the file system of the HCL Workload Automation home directory (TWSHome). Resolve any problem you find and rerun the script.

AWSFAB103E

The script was unable to expand the file maestro.tar.z in the HCL Workload Automation home directory (TWSHome).

See message text.

The twsinst script cannot proceed.

Check that there is sufficient space available on the file system of the HCL Workload Automation home directory (TWSHome). Resolve any problem you find and rerun the script.

AWSFAB104E

The script was unable to untar the file maestro.tar.gz in the HCL Workload Automation home directory (TWSHome).

See message text.

The twsinst script cannot proceed.

Check that there is sufficient space available on the file system of the HCL Workload Automation home directory (TWSHome). Resolve any problem you find and rerun the script.

AWSFAB105E

The script was unable to untar the file maestro.tar.z in the HCL Workload Automation home directory (TWSHome).

See message text.

The twsinst script cannot proceed.

Check that there is sufficient space available on the file system of the HCL Workload Automation home directory (TWSHome). Resolve any problem you find and rerun the script.

AWSFAB106E

An incorrect value has been supplied for the parameter -thiscpu.

See message.

The twsinst script cannot proceed.

Rerun the twsinst script, supplying a correct value for the -thiscpu parameter.

The Planning and Installation guide for full details of the syntax of the twsinst script.

AWSFAB107E

An incorrect value has been supplied for the parameter -master.

See message.

The twsinst script cannot proceed.

Rerun the twsinst script, supplying a correct value for the -master parameter.

The Planning and Installation guide for full details of the syntax of the twsinst script.

AWSFAB108E

The option -restore is not allowed on operating system "operating_system".

The -restore operation is not allowed as a parameter to an installation performed on the indicated operating system (for example, IRIX64, OSF1 DYNIX-ptx).

The twsinst script cannot proceed.

If you need to restore the original installation, uninstall the upgraded installation, and then perform a manual restore of the backup image stored in the backup directory: twsuserdir_BACKUP.

AWSFAB109E

You are performing an upgrade to version "version", but the installation script has found a previous instance of HCL Workload Automation, with the same version in the registry file "registry_file", belonging to the same TWSUser: "TWSUser_name".

A TWSUuser cannot own more than one instance of HCL Workload Automation, version version, on the same workstation.

The twsinst script cannot proceed.

Firstly, check that the TWSUser has been typed correctly. If it is not, retry the command.

Check if you are performing the upgrade on the correct computer. If you are not, retry the upgrade from the correct computer.

If the supplied TWSUser is the one you intended, on the correct computer, you must be in one of the following scenarios:

You are trying to upgrade an instance of HCL Workload Automation that has already been upgraded to version version
Verify if this has happened as follows:
  1. Check the instance of HCL Workload Automation, version version on this computer:
    1. Go to the <TWSHome> directory
    2. Run the environment enabling script tws_env
    3. Run a command such as conman or composer to display the product version.
  2. If the version is version you have already upgraded the product and can quit the wizard.
You want to have two instances of the product, one of which is upgraded from a previous instance
To have two instances of the product on the same computer you must have them installed under different TWSUsers. Because you cannot change the TWSUser ID during an upgrade, you must do the following:
  1. Quit this installation.
  2. Uninstall the other fresh installation that you made.
  3. Upgrade the old version of HCL Workload Automation
  4. Install the other fresh instance using a different TWSUser.
Your environment contains traces of a previous installation of HCL Workload Automation that you thought had been completely uninstalled.
  1. Look in the registry_file for the supplied TWSUser and determine the installation directory
  2. Check if there is a valid installation in that directory.
    • If there is a valid installation of version version that you do not want, uninstall it. If it will not uninstall using the uninstaller, follow the instructions in this manual for uninstalling the product manually.
    • If there is no installation, remove the entries in the registry_file relating to version version.
  3. Rerun the upgrade.

AWSFAB111W

The supplied Job Manager port number "port_number" is normally used by other services, such as FTP or Telnet. The twsinst script proceeds using the Job Manager port number that you supplied.

See message text.

The twsinst script proceeds using the Job Manager port number that you supplied.

After the installation completes, you can change the Job Manager port number to a different value by editing the JobManager.ini file. The default value for the HCL Workload Automation agent is 31114. You can use any value in the range from 1 to 65535 that is not being used by another application or service.

AWSFAB112E

The supplied Job Manager port number is equal to the same as the netman port number. Specify a different value.

See message text.

The twsinst script cannot proceed.

Specify a different value for the Job Manager port number. Run the twsinst installation again. The default value for HCL Workload Automation is 31114, but you can use any value in the range from1 to 65535 that is not being used by another application or service.

AWSFAB121W

The supplied DWB port number "port_number" is normally used by other services, such as FTP or Telnet. The twsinst script proceeds using the DWB port number that you supplied.

See message text.

The twsinst script proceeds using the DWB port number that you supplied.

After the installation completes, you can change the DWB port number to a different value by editing the JobManager.ini file.

AWSFAB122E

The supplied DWB port number is the same as the netman port number. Specify a different value.

See message text.

The twsinst script cannot proceed.

Specify a different value for the TDWB port number. Run the twsinst installation again.

AWSFAB123E

The supplied TDWB port number is the same as the jmport number. Specify a different value.

See message text.

The twsinst script cannot proceed.

Specify a different value for the DWB port number. Run the twsinst installation again.

AWSFAB124E

The value you specified for the "parameter" is incorrect. Valid values are true and false.

See message text.

The twsinst script cannot proceed.

Specify true or false. Run the twsinst installation again.

AWSFAB128E

The value you specified for the -addjruntime is incorrect for the agent that you are installing.You can add the runtime for Java job plug-ins only to HCL Workload Automation for z/OS agents (z-centric) or to dynamic agents.

See message text.

The twsinst script cannot proceed.

If you are installing the fault-tolerant agent, specify false for the -addjruntime parameter or install the HCL Workload Automation for z/OS agent (z-centric) or the dynamic agent. Run the twsinst installation again.

AWSFAB132E

The uninstallation process failed for one of these reasons:\n You logged into the system with an incorrect user\n You specified an incorrect username\n You are running the twsinst script from the wrong directory.

See message text.

The twsinst script cannot proceed.

Either change the value of the username to the same username used during installation, or run the twsinst script from the installation folder. For details see the HCL Workload Automation: Planning and Installation Guide

Rerun the twsinst script, supplying the correct parameter.

AWSFAB133E

Either the -password parameter is missing, or an incorrect value has been supplied for a parameter. The parameter must be as follows: "installation_parameter".

The indicated parameter is required for this type of installation.

The twsinst script cannot proceed.

Verify the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to see a list of the parameters.

Run the twsinst script again, supplying the correct parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB134E

You specified an incorrect password for the user "username".

The indicated parameter is incorrect.

The twsinst script cannot proceed.

Run the twsinst script again, supplying the correct parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB135E

The "user_account" user account you supplied does not exist on the local computer. The operation cannot proceed.

The indicated parameter is incorrect.

The twsinst script cannot proceed.

Run the twsinst script again, supplying the correct parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB136E

An error occurred when creating the "user_account" user on the local computer. The twsinst installation cannot proceed.

The indicated parameter is incorrect.

The twsinst script cannot proceed.

Run the twsinst script again, supplying the correct parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB141E

An instance of HCL Workload Automation is already installed for another user in the "directory" directory you specified as installation directory.

See message.

The twsinst script cannot proceed.

Specify a different installation directory and launch the installation again.

HCL Workload Automation: Planning and Installation Guide

AWSFAB142E

The directory "directory" you specified is incorrect or is not a fully qualified path.

See text.

The twsinst script cannot proceed.

Specify a correct fully qualified path for the installation directory and run the installation again.

HCL Workload Automation: Planning and Installation Guide

AWSFAB143W

The user "user" is a domain user. Verify if he has all the required permissions to perform the installation.

See text.

The twsinst script proceeds.

The domain user must have the following permissions:

  • Act as part of the operating system
  • Allow logon locally
  • Impersonate a client after authentication right
  • Logon:
    • Locally
    • As batch job
    • As service
  • Replace process level token
HCL Workload Automation: Planning and Installation Guide

AWSFAB151E

The specified parameter "parameter" must have an integer value or -1.

See text.

The twsinst script cannot proceeds.

Run the twsinst script again, supplying another directory.

HCL Workload Automation: Planning and Installation Guide

AWSFAB154E

The following processes are still running "processes". Close them before running the operation again.

See text.

The twsinst script cannot proceeds.

Perform the following steps:
  1. Verify which processes are still running by performing the following actions:
    - On Windows:
    1. Open Task Manager->Processes.
    2. Select Show processes from all users.
    - On UNIX
    1. Run the ps -ef command.
  2. Wait for processes completion or stop them.
  3. Run the twsinst script again.
HCL Workload Automation: Planning and Installation Guide

AWSFAB155E

The following processes are still running "processes". Either close them or wait for their completion before running the operation again.

See text.

The twsinst script cannot proceeds.

Perform the following steps:
  1. Verify which processes are still running by performing the following actions:
    - On Windows:
    1. Open Task Manager->Processes.
    2. Select Show processes from all users.
    - On UNIX
    1. Run the ps -ef command.
  2. Wait for processes completion or stop them.
  3. Run the twsinst script again.
HCL Workload Automation: Planning and Installation Guide

AWSFAB161E

There are still jobs running. The twsinst operation cannot continue. Use the coman sj @#@.@ command to verify which jobs are still running.

See text.

The twsinst script cannot proceeds.

  1. >Use the coman sj @#@.@ command to verify which jobs are still running.
  2. Wait for job completion.
  3. Run the twsinst script again.
HCL Workload Automation: Planning and Installation Guide

AWSFAB162E

The following processes are still running. Close them before running the operation again.

See text.

The twsinst script cannot proceeds.

Perform the following steps:
  1. Verify which processes are still running by performing the following actions:
    - On Windows:
    1. Open Task Manager->Processes.
    2. Select Show processes from all users.
    - On UNIX
    1. Run the ps -ef command.
  2. Wait for processes completion or stop them.
  3. Run the twsinst script again.
HCL Workload Automation: Planning and Installation Guide

AWSFAB163E

The following processes are still running. Either close them or wait for their completion before running the operation again.

See text.

The twsinst script cannot proceeds.

Perform the following steps:
  1. Verify which processes are still running by performing the following actions:
    - On Windows:
    1. Open Task Manager->Processes.
    2. Select Show processes from all users.
    - On UNIX
    1. Run the ps -ef command.
  2. Wait for processes completion or stop them.
  3. Run the twsinst script again.
HCL Workload Automation: Planning and Installation Guide

AWSFAB164E

The values specified for "parameter1" and "parameter2" cannot be the same.

See message.

parameter1 and parameter2 identify two parameters that cannot have the same value.

The twsinst script cannot proceed.

Rerun the twsinst script, supplying different values for the parameter1 and parameter2 parameters.

AWSFAB165E

You are trying to install the standard agent or the fault-tolerant agent, from the wrong eImage.

See message.

The eImage you downloaded does not contain the images to install the files for the standard agent or the fault-tolerant agent.

The twsinst script cannot proceed.

Download the correct eImage using the Passport Advantage Online website and run the twsinst script again.

AWSFAB166E

You are trying to add the runtime for Java job plugins, but the eImage you downloaded does not contain the appropriate installation files.

See message.

It is not possible to add the runtime for Java job plugins using the current eImage.

The twsinst script cannot proceed.

Download the Java extensions eImage using the Passport Advantage Online website and run the twsinst script again.

AWSFAB167E

You are trying to upgrade or modify a standard agent or a fault-tolerant agent, but the eImage you downloaded does not contain the related installation files.

See message.

The eImage you downloaded does not contain the images to install the files for the standard agent or the fault-tolerant agent.

The twsinst script cannot proceed.

Download the correct eImage using the Passport Advantage Online website and run the twsinst script again.

AWSFAB168E

You are trying to upgrade or modify the runtime for Java job plugins, but the eImage you downloaded does not contain the related installation files.

See message.

The eImage you downloaded does not contain the images to update the runtime for Java job plugins.

The twsinst script cannot proceed.

Download the Java extensions eImage using the Passport Advantage Online website and run the twsinst script again.

AWSFAB169E

Operating system not supported.

It is not possible to run the installation process on the operating system running on this machine.

The installation process cannot proceed.

Run the installation process on one of the operating systems supported by HCL Workload Automation.

AWSFAB170E

Linux distribution is not supported.

It is not possible to run the installation process on the Linux distribution running on this machine.

The installation process cannot proceed.

Run the installation process on one of the Linux distributions supported by HCL Workload Automation.

AWSFAB171E

The Linux version: "operating_system" "major_version" "minor_version"; is not supported.

It is not possible to run the installation process on the Linux version running on this machine.

The installation process cannot proceed.

Run the installation on one of the Linux versions supported by HCL Workload Automation.

AWSFAB172E

The Linux service pack: "operating_system" "major_version" "minor_version"; is not supported.Update the Operating system to service pack: "operating_system" "major_version" "correct_minor_version".

It is not possible to run the installation process on the Linux service pack running on this machine.

The installation process cannot proceed.

Run the installation process on one of the Linux service packs supported.

AWSFAB173E

Operating system version is not supported.

It is not possible to run the installation process on the operating system version running on this machine.

The installation process cannot proceed.

Run the installation process on one of the Operating System versions supported.

AWSFAB174E

AIX operating system maintanance package is not supported.

It is not possible to run the installation process on the operating system maintanance package running on this machine.

The installation process cannot proceed.

Run the installation on one of the operating system maintanance packages supported.

AWSFAB175E

Found library "library" but not "softlink". Softlink "softlink" to "library".

SEE TEXT.

The installation process cannot proceed.

Create the softlink to the required library.

AWSFAB176E

Library libXp.so.6 and libXmu.so.6 are not found.The graphical installation process cannot work.

SEE TEXT.

The installation process cannot proceed.

Install the required libraries libXp.so.6 and libXmu.so.6.

AWSFAB177E

Required libraries are not installed on the running system.

SEE TEXT

The install process cannot proceed.

Install the required libraries on the running system.

AWSFAB178E

32-bit AIX operating system is not supported.Only AIX 64-bit system are supported by HCL Workload Automation.

It is not possible to run the installation process on the 32-bit AIX operating system running on this machine.

The installation process cannot proceed.

Run the installation on a 64-bit AIX operating system supported by HCL Workload Automation.

AWSFAB179E

The AIX maintanance package "maintanance_package" is not supported.Update the running operating system to the manteinance package "maintanance_package".

SEE TEXT.

The installation process cannot proceed.

Run the installation process on one of the AIX maintanance packages supported by HCL Workload Automation.

AWSFAB180E

The AIX fix "fix" was not found on the running system.

It is not possible to run the installation process on the running AIX machine because the required fix is not installed.

The installation process cannot proceed.

Run the installation on an AIX system containing the required fixes.

AWSFAB181E

C++ runtime level "runtime_level" not supported.Update the C++ runtime level to "required_runtime_level".

SEE TEXT.

The installation process cannot proceed.

Run the installation on a system having the required C++ runtime level.

AWSFAB193E

The library "library" must be installed on the running system.

SEE TEXT.

The installation process cannot proceed.

Install the required libraries on the running system.

AWSFAB194E

The 64 bit library "library" must be installed on the running system.

SEE TEXT.

The installation process cannot proceed.

Install the required libraries on the running system.

AWSFAB196E

The patch "patch" must be installed on the running system.

SEE TEXT.

The installation process cannot proceed.

Install the required patches on the running system.

AWSFAB197E

Upgrade patch "patch" "bundle" to version "version".

SEE TEXT.

The installation process cannot proceed.

Install the required patch on the running system.

AWSFAB198E

Operating system required patches are missing.

SEE TEXT.

The installation process cannot proceed.

Install the required patches on the running system.

AWSFAB199E

Required cluster patch "patch" is missing.

SEE TEXT.

The installation process cannot proceed.

Install the required cluster patch on the running system.

AWSFAB200E

Required security patch is missing.

A required security patch is missing.

The installation process cannot proceed.

Install the required security patch on the running system.

AWSFAB201W

WebSphere recommended patches are missing.

SEE TEXT.

The installation process cannot proceed.

Install the recommended WebSphere patches on the running system.

AWSFAB203E

Unsupported quality pack.Update the quality pack to "var1" "var2" or December 2004.

SEE TEXT.

The installation process cannot proceed.

Install the required quality pack on the running system.

AWSFAB205E

The operating system release level is not supported.Update the release level "release_level" to "required_release_level".

SEE TEXT

The installation process cannot proceed.

Update the operating system to a release level supported by HCL Workload Automation

AWSFAB211W

The minimum required patch "patch" was not found on the running system.

SEE TEXT.

The installation process proceeds, but some errors might occur.

Install the 19964-05 patch on the running system.

AWSFAB212E

Operating system release "os_release" not supported.

The operating system release is not supported

The installation process cannot proceed.

Install an operating system release supported by HCL Workload Automation.

AWSFAB213E

Not enogh free disk space on file system "fs". "disk_space" "ds_measure_unit" are required.

SEE TEXT.

The installation process cannot proceed.

Free some space on the specified file system

AWSFAB214E

Not enough free disk space on swap file system.

SEE TEXT.

The installation process cannot proceed.

Free some space on the swap file system

AWSFAB215E

The directory "dir" is not found.

SEE TEXT.

The installation process cannot proceed.

Create the required directory

AWSFAB216E

You specified a non existing installation path.

SEE TEXT.

The installation process cannot proceed.

Specify an existing installation path.

AWSFAB218E

Hardware "hw" not supported.The required hardware is "hw_required".

SEE TEXT.

The installation process cannot proceed.

Install HCL Workload Automation on required hardware.

AWSFAB219E

Hardware model "model" not supported.The required hardware model is "model_required".

SEE TEXT.

The installation process cannot proceed.

Install HCL Workload Automation on required hardware model.

AWSFAB220W

Recommended memory requirements are not satisfied.

SEE TEXT.

The installation process continues, but some problems might occur.

Increase the quantity of memory to satisfy the recommended requirements.

AWSFAB221E

The Memory requirements are not satisfied.The minimum requirement is "min_mem" Kbytes and recommended is "rec_mem" Kbytes.

SEE TEXT.

The installation process cannot proceed.

Increase the quantity of memory to satisfy the minimum or the recommended memory requirements.

AWSFAB224W

Kernel parameter "kparam" not defined.

The kernel parameter is not defined.

The installation process continues, but some problems might occur.

Specify the requested kernel parameter.

AWSFAB225E

Kernel parameter "kparam" not defined.

SEE TEXT.

The installation process cannot proceed.

Specify the required kernel parameter.

AWSFAB228E

Required kernel parameter(s) not defined.

SEE TEXT.

The installation process cannot proceed.

Specify the required kernel parameters.

AWSFAB229W

Recommended kernel parameters are not defined.

SEE TEXT.

The installation process continues, but some problems might occur.

Specify the recommended kernel parameters.

AWSFAB230W

Some prerequisites were not satisfyed during the check, look at the log for more details.

SEE TEXT.

The installation process continues, but some problems might occur.

Look at the log for more details.

AWSFAB231E

The prerequisites scan detected missing prerequisites. Check the prerequisites scan logs, precheck_result.txt and result.txt, located in the "installation_log" folder, for details. Install the missing prerequisites and rerun the installation command. If no prerequisites are missing, rerun the installation command with the -skipcheckprereq option.

SEE TEXT.

If you specified the -skipcheckprereq flag, the installation continues, otherwise it stops.

Consult the result.txt file for any missing prerequisites. Install the missing prerequisites and then run the installation procedure again with the -skipcheckprereq flag.

AWSFAB233W

The free disk space available on the swap file system does not meet the recommended requirements.

SEE TEXT.

The installation process continues, but some problems might occur.

Free some space on the swap file system

AWSFAB236E

You are trying to install or upgrade a HCL Workload Automation instance from the wrong eImage for the target operating system.

See message.

The current eImage is not the appropriate one for your operating system.

The twsinst script cannot proceed.

Download the correct eImage and run the twsinst script again.

AWSFAB237E

You are trying to upgrade or modify the HCL Workload Automation for z/OS agent (z-centric), but the images on the workstation do not contain the related installation files.

See message.

The images on the workstation do not contain the files, needed to upgrade the HCL Workload Automation for z/OS agent.

The twsinst script cannot proceed.

Download the HCL Workload Automation for z/OS agent eImage using the Passport Advantage Online website or copy the images from the HCL Workload Automation for z/OS agent DVD and run the twsinst script again.

AWSFAB238E

You are trying to install the HCL Workload Automation dynamic agent, but you did not specify the -tdwbport <port_number> installation parameter with a <port_number> value different from 0.

See message.

You have not specified the installation parameter -tdwbport <port_number> to install the HCL Workload Automation dynamic agent.

The twsinst script cannot proceed.

Specify the installation parameter -tdwbport <port_number> with a <port_number> value different from 0 and run the twsinst script again.

AWSFAB239W

You are installing a dynamic agent but you provided some parameters that are not necessary for the dynamic agent installation. These parameters are ignored.

SEE TEXT.

The installation process continues and the unnecessary parameters are ignored.

None.

AWSFAB240W

You are installing a fault-tolerant agent but you provided some parameters that are not necessary for a fault-tolerant agent installation. These parameters are ignored.

SEE TEXT.

The installation process continues and the unnecessary parameters are ignored.

None.

AWSFAB243E

An error occurred running the option that recreates the HCL Workload Automation installation on the specified path "twa_path". Check the installation log for details.

SEE TEXT.

The installation process cannot proceed.

Specify an existing installation path.

AWSFAB246E

The value you specified for the -addjruntime is incorrect for the fault-tolerant agent that you are upgrading.You can add the runtime for Java job plug-ins only to dynamic agents.To install and configure a dynamic agent during upgrade you must specify the -tdwbport <port_number> parameter with a <port_number> value different from 0.

See message text.

The twsinst script cannot proceed.

If you are upgrading the fault-tolerant agent, specify false for the -addjruntime parameter or install the dynamic agent specifying the -tdwbport <port_number> parameter with a <port_number> value different from 0. Run the twsinst installation again.

AWSFAB247E

The user account you specified: "user_account" is a reserved IBM i User Profile. You cannot use a reserved account. Specify an existing user account different from the following reserved accounts: QDBSHR, QDFTOWN, QDOC, QLPAUTO, QLPINSTALL, QRJE, QSECOFR, QSPL, QSYS, QTSTRQS.

See message text.

The twsinst script cannot proceed.

Check that the correct account name was supplied. If it was not, rerun the twsinst script, supplying the correct account name.

Check that the supplied account name is not a reserved IBM i User Profile. You cannot use a reserved account. Run the twsinst script again, specifying an existing user account different from the following reserved accounts: QDBSHR, QDFTOWN, QDOC, QLPAUTO, QLPINSTALL, QRJE, QSECOFR, QSPL, QSYS, QTSTRQS.

The account must exist before rerunning the twsinst script.

AWSFAB248E

There is already the IBM i "user_account" library in the system. You must rename or remove the library, or you must specify a different user account.

See message text.

The twsinst script cannot proceed.

Specify a library that does not exists or supply a different account name.

AWSFAB249E

32-bit "os" operating system is not supported.Only "os" 64-bit system are supported by HCL Workload Automation.

See message text.

The installation process cannot proceed.

Run the installation on a 64-bit operating system supported by HCL Workload Automation. See the Detailed System requirement for a complete list of the supported operating systems and the H/W and S/W requirements.

AWSFAB284E

The Linux "operating_system" service pack "minor_version" is not supported. Update the Operating system to service pack "correct_minor_version".

It is not possible to run the installation process on the Linux service pack running on this machine.

The installation process cannot proceed.

Run the installation process on one of the Linux service packs supported.

AWSFAB286E

The eImage on your workstation is corrupt. You must run the TAR command on QP2TERM or AIXTERM shell to untar the eImage otherwise your "script_name" script fails.

See message text.

The installation process cannot proceed.

You must run the TAR command on QP2TERM or AIXTERM shell to untar the eImage otherwise your installation fails.

AWSFAB287E

The current shell is not supported for "script_name" script. Use QSH shell to run the "script_name" script.

See message text.

The installation process cannot proceed.

Use QSH shell to run the installation process.

AWSFAB289W

The Java extension is already installed for the user "user_name" that you specified.

See message.

The installation process proceeds and it does not install the java extension.

Check the install log file and read the warning message or messages.

AWSFAB290E

You are modifying a product version different from "version". The modify action can be applied only to a HCL Workload Automation, version "version" instance.

See message.

The installation process cannot proceed.

Specify another user or another instance and rerun the operation.

AWSFAB294E

The value you specified for -addjruntime is incorrect for the agent that you are modifying.You can add the runtime for Java job plug-ins only to dynamic agents or HCL Workload Automation for z/OS agents with dynamic capabilities.For fault-tolerant agents and HCL Workload Automation for z/OS agents you must enable the dynamic capabilities before performing a modify.

See message text.

The twsinst script cannot proceed.

To solve the problem, specify false for the -addjruntime parameter or enable the dynamic capabilities. Run the twsinst script again.

For more information about how to enable dynamic scheduling, see the Planning and Installation Guide.

HCL Workload Automation: Planning and Installation Guide

AWSFAB295W

You can add the runtime for Java job plug-ins only to dynamic agents or HCL Workload Automation for z/OS agents with dynamic capabilities.For fault-tolerant agents and HCL Workload Automation for z/OS agents you must enable the dynamic capabilities before running the upgrade. The step to add the runtime for Java job plug-ins is ignored.

See message text.

The installation process proceeds without installing the java extension.

To add the runtime for Java job plug-ins, enable the dynamic capabilities. Run the twsinst script after the upgrade with the -modify and -addjruntime parameters.

For more information about how to enable dynamic scheduling, see the Planning and Installation Guide.

HCL Workload Automation: Planning and Installation Guide

AWSFAB296E

The operation -restore for the user "user_name" cannot be performed, because the instance you want to restore is not at version "version" or later.

The -restore operation can be performed only if the instance is at version 9.1 or later.

The installation process cannot proceed.

Install version 9.1 or later.

HCL Workload Automation: Planning and Installation Guide

AWSFAB303E

The parameter "parameter_name" is invalid.

See message.

parameter_name identifies the parameter that is invalid.

The twsClusterUpg script cannot proceed.

Run the twsClusterUpg script again, supplying a different value for the parameter_name parameter.

AWSFAB304E

You cannot specify the -passwords parameter if you do not specify the -groups parameter.

See message.

The twsClusterUpg script cannot proceed.

Run the twsClusterUpg script again, supplying both the parameters.

AWSFAB305E

You specified an invalid path. The specified path "path_name" is not valid either because it does not exist or because it does not contain the file twsinst.vbs.

See message.

path_name identify the path that is not valid.

The twsClusterUpg script cannot proceed.

Rrun the twsClusterUpg script again, supplying the path that contains the file twsinst.vbs..

AWSFAB306E

If you specify the "par1_name" parameter, you must also specify the "par2_name".

See message.

par1_name and par2_name identify the two parameters that must be specified together.

The twsClusterUpg script cannot proceed.

Run the twsClusterUpg script again, supplying both the parameters.

AWSFAB307E

You cannot specify the "par1_name" parameter, because this image is the General Availability version image.

See message.

par1_name is the parameter that you cannot specify.

The twsClusterUpg script cannot proceed.

Run the twsClusterUpg script again, removing the parameter.

AWSFAB308E

This is the General Availability image, you must specify the "par1_name" parameter.

See message.

par1_name is the parameter that you must specify.

The twsClusterUpg script cannot proceed.

Run the twsClusterUpg script again, supplying the missing parameter.

AWSFAB309E

You supplied the parameter "par1_name" more than once.

See message.

par1_name is the parameter specified more than once.

The twsClusterUpg script cannot proceed.

Run the twsClusterUpg script again, supplying the parameter only once.

AWSFAB310E

You did not specify any values for the parameter "par1_name". Specify a value for the parameter "par1_name".

See message.

par1_name is the parameter for which you did not specify a value.

The twsClusterUpg script cannot proceed.

Run the twsClusterUpg script again, supplying a value for the parameter.

AWSFAB311E

The syntax you specified for the parameter "par1_name" value is incorrect.

See message.

par1_name is the parameter whose value contains errors.

The twsClusterUpg script cannot proceed.

Run the twsClusterUpg script again, specifying a valid value for the parameter.

AWSFAB312E

An error occurred while using the Windows Management Instrumentation (WMI) service. Error code: "err_code".

See message.

error_code is the Microsoft error code that the script received.

The twsClusterUpg script cannot proceed.

See in the Microsoft documentation for the solution to solve the error.

AWSFAB314W

The group named "group_name" is not upgraded because it contains more than one HCL Workload Automation resource.

See message.

group_name is the group that is not upgraded.

The twsClusterUpg script continues with the next group.

Upgrade manually the group that the script could not upgrade automatically when the procedure completes the automatic upgrade.

AWSFAB315E

The group named "group_name" is not upgraded because it does not contain a HCL Workload Automation resource.

See message.

group_name is the group that does not contain any HCL Workload Automation resource.

The twsClusterUpg script cannot proceed.

Rrun the twsClusterUpg script again, removing the group that does not contain any HCL Workload Automation resources.

AWSFAB316E

The group named "group_name" is not upgraded because it contains more than one HCL Workload Automation resource.

See message.

group_name is the group that you specified for upgrade that contains more than one HCL Workload Automation resource.

The twsClusterUpg script cannot proceed.

From the list of the groups to upgrade, remove the group that contains more than one HCL Workload Automation resource, then upgrade manually when the procedure completes the automatic upgrade.

AWSFAB317E

An error occurred while running the cluster.exe command.

See message.

The twsClusterUpg script cannot proceed.

For further information, see the TWSClusterMainLog.txt log. The twsClusterUpg command launches the twsinst.vbs, twspatch.vbs, and the twsClusterAdm.exe commands. If the TWSClusterMainLog.txt indicated that one of these commands failed, analyze its corresponding log for further details.

AWSFAB318E

An internal error occurred while parsing the node names.

See message.

The twsClusterUpg script cannot proceed.

For further information, see the TWSClusterMainLog.txt log. The twsClusterUpg command launches the twsinst.vbs, twspatch.vbs, and the twsClusterAdm.exe commands. If the TWSClusterMainLog.txt indicated that one of these commands failed, analyze its corresponding log for further details.

AWSFAB320E

The product cannot pause the node "node_name" because it is in the incorrect status "status".

See message.

node_name is the node that cannot be paused.

status is the incorrect status.

The twsClusterUpg script cannot proceed.

Verify with the Cluster Administrator the status of the node.

AWSFAB321W

The resume of the node "node_name" is not performed because it is in the status "status".

See message.

node_name is the node that cannot be resumed.

status is the incorrect status.

The twsClusterUpg script cannot proceed.

Verify with the Cluster Administrator the status of the node.

AWSFAB322W

The resume of the nodes is not performed, because some groups were not upgraded successfully.

See message.

The twsClusterUpg script completed.

Verify the message above for details about the failures, and correct them. Then resume the nodes.

AWSFAB324E

An error occurred while pausing the node "node_name"

See message.

node_name is the node that cannot be paused.

The twsClusterUpg script cannot proceed.

Verify the status of the node. Put it in pause status and run the command again.

AWSFAB326E

The product cannot retrieve the status of the node "node_name".

See message.

node_name is the node whose status cannot be retrieved.

The twsClusterUpg script cannot proceed.

Verify with the Cluster Administrator the status of the node.

AWSFAB327E

The node "node_name" was not paused within the timeout period.

See message.

node_name is the node that cannot be paused within the timeout period.

The twsClusterUpg script cannot proceed.

Pause the node manually and rrun the script again.

AWSFAB329E

An error occurred while resuming node "node_name"

See message.

node_name is the node that cannot be resumed.

The twsClusterUpg script cannot proceed.

Check with the Cluster Administrator the status of the node.

AWSFAB330E

The node "node_name" was not resumed within the timeout period.

See message.

node_name is the node that cannot be resumed within the timeout period.

The twsClusterUpg script cannot proceed.

Check with the Cluster Administrator the status of the node.

AWSFAB331E

An internal error occurred while parsing the nodes and the group lists.

See message.

The twsClusterUpg script cannot proceed.

For further information, see the TWSClusterMainLog.txt log. The twsClusterUpg command launches the twsinst.vbs, twspatch.vbs, and the twsClusterAdm.exe commands. If the TWSClusterMainLog.txt indicated that one of these commands failed, analyze its corresponding log for further details.

AWSFAB332E

An internal error occurred while parsing the nodes and the resource lists.

See message.

The twsClusterUpg script cannot proceed.

For further information, see the TWSClusterMainLog.txt log. The twsClusterUpg command launches the twsinst.vbs, twspatch.vbs, and the twsClusterAdm.exe commands. If the TWSClusterMainLog.txt indicated that one of these commands failed, analyze its corresponding log for further details.

AWSFAB333E

The product cannot find the HCL Workload Automation resource DLL path.

See message.

The twsClusterUpg script cannot proceed.

For further information, see the TWSClusterMainLog.txt log. The twsClusterUpg command launches the twsinst.vbs, twspatch.vbs, and the twsClusterAdm.exe commands. If the TWSClusterMainLog.txt indicated that one of these commands failed, analyze the corresponding log for further details.

AWSFAB337E

An error occurred while setting the resource "resource_name" to offline.

See message.

resource_name is the resource that cannot be taken offline.

The twsClusterUpg script cannot proceed.

For further information, see the TWSClusterMainLog.txt log. The twsClusterUpg command launches the twsinst.vbs, twspatch.vbs, and the twsClusterAdm.exe commands. If the TWSClusterMainLog.txt indicated that one of these commands failed, analyze its corresponding log for further details.

AWSFAB338E

The product cannot retrieve the status of the resource "resource_name".

See message.

resource_name is the resource whose status cannot be retrieved.

The twsClusterUpg script cannot proceed.

For further information, see the TWSClusterMainLog.txt log. The twsClusterUpg command launches the twsinst.vbs, twspatch.vbs, and the twsClusterAdm.exe commands. If the TWSClusterMainLog.txt indicated that one of these commands failed, analyze its corresponding log for further details.

AWSFAB339E

The resource "resource_name" was not set to offline within the timeout period.

See message.

resource_name is the resource that cannot be taken offline within the timeout period.

The twsClusterUpg script cannot proceed.

Check with the Cluster Administrator the status of the resource.

AWSFAB341E

An error occurred while setting the resource "resource_name" to online.

See message.

resource_name is the resource that cannot be taken online.

The twsClusterUpg completed, but the specified resource was not set to online.

Check with the Cluster Administrator the status of the resource.

AWSFAB342E

The resource "resource_name" was not set to online within the timeout period.

See message.

resource_name is the resource that cannot be taken online within the timeout period.

The twsClusterUpg completed, but the specified resource was not set to online.

Check with the Cluster Administrator the status of the resource.

AWSFAB343E

An internal error occurred while parsing resources and group lists.

See message.

The twsClusterUpg script cannot proceed.

For further information, see the TWSClusterMainLog.txt log. The twsClusterUpg command launches the twsinst.vbs, twspatch.vbs, and the twsClusterAdm.exe commands. If the TWSClusterMainLog.txt indicated that one of these commands failed, analyze its corresponding log for further details.

AWSFAB346E

The cluster group "group_name" was not upgraded successfully.

See message.

group_name is the group that was not upgraded successfully.

The twsClusterUpg script continues with the remaining groups.

For further information, see the TWSClusterMainLog.txt log. The twsClusterUpg command launches the twsinst.vbs, twspatch.vbs, and the twsClusterAdm.exe commands. If the TWSClusterMainLog.txt indicated that one of these commands failed, analyze its corresponding log for further details.

AWSFAB349E

The file "file_name" does not exist, the tool cannot upgrade the resource "resource_name".

See message.

file_name is the file that cannot be accessed.

resource_name is the resource that is not upgraded.

The twsClusterUpg script continues with the remaining groups.

For further information, see the TWSClusterMainLog.txt log. The twsClusterUpg command launches the twsinst.vbs, twspatch.vbs, and the twsClusterAdm.exe commands. If the TWSClusterMainLog.txt indicated that one of these commands failed, analyze its corresponding log for further details.

AWSFAB350E

The product cannot find the version of the HCL Workload Automation resource DLL "file_name".

See message.

file_name is the HCL Workload Automation DLL file name.

The twsClusterUpg script continues with the remaining groups.

For further information, see the TWSClusterMainLog.txt log. The twsClusterUpg command launches the twsinst.vbs, twspatch.vbs, and the twsClusterAdm.exe commands. If the TWSClusterMainLog.txt indicated that one of these commands failed, analyze its corresponding log for further details.

AWSFAB352E

The upgrade to version "version" is impossible because the version of the product present in the instance is incorrect.

See message.

version is the version to which the upgrade is being attempted.

The twsClusterUpg script continues with the remaining groups.

For further information, see the TWSClusterMainLog.txt log. The twsClusterUpg command launches the twsinst.vbs, twspatch.vbs, and the twsClusterAdm.exe commands. If the TWSClusterMainLog.txt indicated that one of these commands failed, analyze its corresponding log for further details.

AWSFAB356E

The number of passwords ("pws_num") that you specified, is not equal to the number of groups ("grp_num") that must be upgraded. Check the -groups and -passwords parameters.

See message.

pws_num is the number of provided passwords.

grp_num is the number of provided groups.

The twsClusterUpg script cannot proceed.

Run the twsClusterUpg script again, supplying an equal number of passwords and groups.

AWSFAB357E

None of the groups you specified contain HCL Workload Automation resources.

See message.

The twsClusterUpg script cannot proceed.

Run the twsClusterUpg script again, supplying at least one group containin a HCL Workload Automation resource.

AWSFAB374E

JM port is already used in some other instance. Please specify some other port value.

See message text.

The twsinst script cannot proceed.

Rerun the twsinst script, supplying a value for the port number parameter in the indicated range.

AWSFAB375E

An error occurred when creating the "directory" folder on the local computer. The operating system error is: "error". The twsinst installation cannot proceed.

See message text.

The twsinst script cannot proceed.

Analyze the cause of the failure in the output of the script. Solve the problem and rerun the script. A possible cause of failure is that you do not have the correct permission to create the directory.

HCL Workload Automation: Planning and Installation Guide

AWSFAB379E

The "user_account" user account you supplied does not have the right security policies. The operation cannot proceed.

The indicated parameter is incorrect.

The twsinst script cannot proceed.

Run the twsinst script again, supplying the correct parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB380E

A parameter to twsinst has not been supplied. The "installation_parameter" parameter must be specified when "installation_parameter2" parameter is supplied.

The installation_parameter is a parameter that you did not supplied, that is required when installation_parameter2 parameter is supplied.

The twsinst script cannot proceed.

Check the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to the see a list of the available parameters.

Rerun the twsinst script, supplying the required parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB381E

An instance of HCL Workload Automation is already installed for same user in the "directory" directory you specified as installation directory.

See message.

The twsinst script cannot proceed.

Specify a different user and launch the installation again.

HCL Workload Automation: Planning and Installation Guide

AWSFAB382E

Accept the license and terms conditions before proceeding with the installation.

See message.

The twsinst script cannot proceed.

Accept the license and terms conditions specifying the parameter -acceptlicense yes.

HCL Workload Automation: Planning and Installation Guide

AWSFAB383E

An incorrect value has been supplied for the parameter gwid. The accepted values must start with either a letter or underscore (_) and may contain only letters, digits, underscores (_), hyphens (-), and periods (.).

See message text.

The twsinst script cannot proceed.

Check the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to the see a list of the available parameters.

Rerun the twsinst script, supplying the correct parameter value.

HCL Workload Automation: Planning and Installation Guide

AWSFAB384E

It is not possible to retrieve the domain name for the user "user". Check user rights and permissions.

See message.

The twsinst script cannot proceed.

Check user rights and permissions.

HCL Workload Automation: Planning and Installation Guide

AWSFAB385E

If you specify the -domain parameter you cannot specify the username in the format domain\\username.

See message.

The twsinst script cannot proceed.

Verify the syntax of the script, make the necessary changes and run the script again.

HCL Workload Automation: Planning and Installation Guide

AWSFAB386E

It is not possible to retrieve the domain name for the user "user". Check user rights and permissions.

See message.

The twsinst script cannot proceed.

Verify the user rights and permissions, make the necessary changes, and run the script again.

HCL Workload Automation: Planning and Installation Guide

AWSFAB389E

You can specify the "parameter1" parameter only when the "parameter2" parameter has been specified.

See message text.

The twsinst script cannot proceed.

Check the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to the see a list of the available parameters.

Rerun the twsinst script, supplying the correct parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB403W

You upgraded PeopleSoft method. In order to continue schedule PeopleSoft jobs you have to copy psjoa.jar file under "parameter1" folder.

See message text.

Copy psjoa.jar file under methods folder in the installation directory.

Copy psjoa.jar file under methods folder in the installation directory.

HCL Workload Automation: Planning and Installation Guide

AWSFAB404E

The installation cannot run because the user running the twsinst installation script must either be the root user or the same user specified for the uname parameter.

See message text.

The twsinst script cannot proceed.

Login as the root user and rerun the twsinst script specifying the correct account name in the uname parameter.

The account must exist before rerunning the twsinst script.

Login as the the correct account name and rerun the twsinst script without specifying the uname parameter.

AWSFAB405E

No root installation is supported only for dynamic agent installation.

See message text.

The twsinst script cannot proceed.

If you need to install a HCL Workload Automation fault-tolerant agent or both HCL Workload Automation fault-tolerant agent and HCL Workload Automation dynamic agent, login as the root user and rerun the twsinst script specifying the account name in the uname parameter.

The account must exist before rerunning the twsinst script.

AWSFAB406E

HCL Workload Automation dynamic agent instance can be updated only by the same user who previously installed it.

See message text.

The twsinst script cannot proceed.

If you need to update or uninstall a HCL Workload Automation dynamic agent, login as the InstallationLoginUser user and rerun the twsinst script.

The InstallationLoginUser is logged into the JobManager.ini file.

AWSFAB407W

You are proceeding with the installation process in spite of missing prerequisites being detected by the prerequisites scan.

SEE TEXT.

If you specified the -skipcheckprereq flag the installation continue, otherwise it stops.

Consult the result.txt file for the missing prerequisites. Install the missing prerequisites and then run the installation procedure again with the -skipcheckprereq flag.

AWSFAB408W

The prerequisites scan detected missing prerequisites. Check the prerequisite scan logs, precheck_result.txt and result.txt, located in the installation log folder, for details. Installation will continue because the missing prerequisites do not affect the installation process.

SEE TEXT.

If you specified the -skipcheckprereq flag the installation continue, otherwise it stops.

Consult the result.txt file for the missing prerequisites. Install the missing prerequisites and then run the installation procedure again with the -skipcheckprereq flag.

AWSFAB409E

Home directory for the user "user" does not exist. Please create it and then run the installation procedure again.

See message text.

The twsinst script cannot proceed.

Create the home directory for the installing user or run the installation procedure with the -inst_dir option for specifying a different installation folder.

AWSFAB411E

gateway_eif_port port is already used by another process. Please specify some other port value.

See message text.

The twsinst script cannot proceed.

Rerun the twsinst script, supplying a value for the port number parameter in the indicated range.

AWSFAB416E

A parameter to twsinst has been supplied that is not appropriate for the supplied installation type. Specify the -password parameter only when new installation type is specified, or when upgrading from 8.5.1.

The twsinst script cannot proceed.

Check the usage of the twsinst script by referring to the HCL Workload Automation: Planning and Installation Guide, or use the command twsinst -u to the see a list of the available parameters.

Rerun the twsinst script, supplying the correct parameter.

HCL Workload Automation: Planning and Installation Guide

AWSFAB417E

An incorrect value has been supplied for the parameter -password.

See message.

The twsinst script cannot proceed.

Rerun the twsinst script, supplying a correct value for the -password parameter.

The Planning and Installation guide for full details of the syntax of the twsinst script.

AWSFAB418E

The value specified for the port number by parameter "installation_parameter" is not valid. The value must be numeric and in the range 1 - 65535.

See message text.

The script cannot proceed.

Rerun the script, supplying a valid value for the port number parameter.

AWSFAB419E

This script must be run from a command prompt that is running as Administrator. Open the command prompt window as administrator, and run the script again.

See message text.

The script cannot proceed.

Open the command prompt window as administrator, and run the script again.

AWSFAB436E

The agent update failed. The files of the previous version will be restored. After restoring the previous version, the agent will continue to work normally.

AWSFAB437E

The restore operation of the previous version completed with errors: rc.

AWSFAB441E

The specified value is incorrect. The value for the "installation_parameter" parameter cannot start with a number.

The value must start with an alphabetic character.

The twsinst script cannot proceed.

Check the usage of the twsinst script in the HCL Workload Automation: Planning and Installation Guide, or use the twsinst -u command option to obtain a list of supported parameters and values.

Rerun the twsinst script, supplying the correct value for the parameter in error.

HCL Workload Automation: Planning and Installation Guide

AWSFAB442E

The agent version is "agent_version". This patch can be installed only on agents at the following level: "expected_version" .

The patch can be installed only on agents at the level listed in the message.

The twsinst script cannot proceed.

None

HCL Workload Automation: Planning and Installation Guide

AWSFAB443E

The file "file" is not found.

SEE TEXT.

The patch installation process cannot proceed.

None

AWSFAB444E

Missing property "property" in file "file".

SEE TEXT.

The patch installation process cannot proceed.

None