AWSBIB - Scheduling language parser messages

This section lists scheduling language parser error and warning messages that might be issued.

The message component code is BIB.

AWSBIB001E

There is a syntax error. The time specified in the at, until, or deadline time definitions must be between 0000 and 2359 (hhmm).

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB002E

There is a syntax error. The job limit must be between 0 and 1024.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB003W

The resource number must be between 1 and 32.

AWSBIB004W

There is a syntax error. Priority must be a numeric value from 0 to 99, hi (= 100), or go (= 101).

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB006E

There is a syntax error. The job stream name is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes, and underscores. It can contain up to 16 bytes.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB007E

There is a syntax error. The job name is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes and underscores. It can contain up to 40 bytes.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB008E

There is a syntax error. The resource name is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes and underscores. It can contain up to 8 bytes.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB009E

There is a syntax error. The prompt name is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes and underscores. It can contain up to 8 bytes.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB010E

There is a syntax error. The calendar name is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes and underscores. It can contain up to 8 bytes.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB011E

There is a syntax error. The recovery job name is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes and underscores. It can contain up to 40 bytes.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB012E

Recovery job lockword is not syntactically valid.

AWSBIB013E

Recovery job password is not syntactically valid.

AWSBIB014E

There is a syntax error in the job statement in the job stream definition. The required streamlogon <username> argument has not been supplied.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB015E

Invalid logon for MPE job

AWSBIB016E

There is a syntax error in the job statement in the job stream definition. The streamlogon user name is not syntactically valid. The name must be no more than 47 bytes, and cannot contain periods or other special characters.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB017E

Group name is not syntactically valid.

AWSBIB018E

Account name is not syntactically valid.

AWSBIB019E

User job name is not syntactically valid.

AWSBIB020E

File name is not syntactically valid.

AWSBIB021E

File group name is not syntactically valid.

AWSBIB022E

File account name is not syntactically valid.

AWSBIB023E

There is a syntax error in the job statement in the job stream definition. The user name associated with the streamlogon keyword is not syntactically valid. The name can contain up to 47 bytes. If the name contains special characters they must be enclosed in quotes ().

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB024E

Group name in streamed job's logon is not syntactically valid.

AWSBIB025E

Account name in streamed job's logon is not syntactically valid.

AWSBIB026E

There is a syntax error. A non-valid date has been specified. The date format is determined by the value in the useropts file.

See message. If the format cannot be found in the useropts file, it is obtained from the localopts file.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB027E

There is a syntax error. The at keyword can be specified for a job or its job stream (not both).

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB028E

There is a syntax error. The until keyword can be specified for a job or its job stream (not both).

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB029E

There is a syntax error. The needs keyword can be specified for a job or its job stream (not both).

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB030W

Resource CPU should match either job's or schedule's cpuid

AWSBIB032E

Internal Error

AWSBIB033E

The file "file_name" could not be opened.

This message can be displayed for either a user file or an internal work file. If it is a user file you might be able to correct the error. If it is an internal file it might be an internal error.

The submitted command cannot be performed.

Check the displayed file name.

  • If it is a user file, make sure that the file exists, is in the correct directory, and has the correct permissions for the HCL Workload Automation.
  • If it is not a user file, ensure that the indicated directory has sufficient disk space to open a file, and that the operating system has sufficient file descriptors available

If you identify an error, correct it and rerun the command. If not, this is an internal error, and search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.

AWSBIB034E

There is a syntax error in the job statement of the job stream definition. A duplicate keyword has been supplied.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB035E

There is a syntax error. The required on keyword is missing.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB036E

There is a syntax error. The job stream definition does not start with the schedule keyword.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB037E

Expected a Job description

AWSBIB038E

There is a syntax error. An object identifier (for example, a job name) is missing.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB039E

There is a syntax error. A numeric value (for example, the priority value) has not been supplied.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB040E

There is a syntax error. An object identifier (for example, a job name) or the @ wildcard is missing.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB041E

There is a syntax error. A date-related keyword has been supplied (for example, deadline) but it is not followed by a date or day specification, or a calendar or iCalendar name.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB042E

There is a syntax error. A day, weekday, or workday keyword has been supplied, but it is not preceded by an offset value.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB043E

There is a syntax error. A dependency specification or other keyword is missing, or an incorrect keyword has been supplied.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB044E

There is a syntax error. A time-related keyword (for example, every) has been supplied, but its value is either missing or is not a valid time specification.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB045E

There is a syntax error. An opens keyword has been supplied, but its value is either missing or is not a valid file name.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB046E

Expected a day specification.

AWSBIB047E

There is a syntax error. An except keyword has been supplied, but its value is either missing or is not a valid date specification, day specification, calendar or iCalendar name.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB048E

Expected a calendar name.

AWSBIB049E

Expected a job autodoc specification.

AWSBIB050E

Expected an autodoc option.

AWSBIB051E

There is a syntax error. The prompt keyword has been supplied, but is not followed by a prompt name or the prompt text enclosed in quotes.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB052E

There is a syntax error. The end keyword has not been found to stop the job stream definition.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB053E

There is a syntax error. A file name has been supplied with an incorrect syntax.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command. Ensure that the file name is fully qualified.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB054E

There is a syntax error. The supplied fully qualified path name is longer than the maximum of "maximum_path_name_length" bytes.

See message.

maximum_path_name_length is the maximum number of bytes permitted in the path name.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB055E

There is a syntax error. The supplied logon name is longer than the maximum of "maximum_logon_name_length" bytes.

See message.

maximum_logon_name_length is the maximum number of bytes permitted in the logon name.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB056E

There is a syntax error. The supplied file name is longer than the maximum of "maximum_file_name_length" bytes.

See message.

maximum_file_name_length is the maximum number of bytes permitted in the file name (excluding the path information).

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB057E

There is a syntax error. The supplied abendprompt is longer than the maximum of "abendprompt_length" bytes.

See message.

abendprompt_length is the maximum number of bytes permitted in the abendprompt.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB058E

There is a syntax error. The supplied Windows domain name is not syntactically valid. The name can contain up to 16 bytes (including the backslash), and the user name can contain up to 31 bytes.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB059E

There is a syntax error. The supplied timezone keyword is not followed by valid time zone information.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB060E

There is a syntax error. The supplied timezone keyword is not followed by a time zone name.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB061E

There is a syntax error. The supplied time zone name is not a recognized time zone.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB062E

There is a syntax error. The supplied time zone name is longer than 40 bytes.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB063E

There is a syntax error. The scheduler has determined that a job statement has commenced but it is not preceded by the : character.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB064E

There is a syntax error. The dates specified with the on and except keywords are not compatible. For example, you might have defined the same date or dates for both.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB065E

There is a syntax error. The deadline offset can be specified for a job or its job stream (not both).

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB066E

There is a syntax error in the job statement in the job stream definition. The rccondsucc keyword defines a return code success condition expression which is longer than the maximum number of bytes allowed: "maximum_expression_length".

See message.

maximum_expression_length is the maximum number of bytes that can be included in the expression.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB067E

There is a syntax error. The return code condition expression: "expression" is not syntactically valid.

See message.expression is the expression which is not valid.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB068E

The time in the relative from <time> to <time> clause of the matching or follows keyword is not in the valid format [+/-][h]hhmm (where mm is between 00-59).

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB069E

The time in the from <time> to <time> clause of the matching or follows keyword must be between 0000-2359.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB070E

There is a syntax error. An at or a schedtime keyword has been specified with a time specification, but is not followed by a timezone/tz or daykeyword, or a right bracket.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB071E

An error has occurred due to either a syntax error or unacceptable value when specifying the time for either the maxdur or mindur keyword, or both. The correct format and acceptable values for the time specified for the keywords are: [h]hhmm (where, hhh represents the number of hours ranging from 000-500, and mm represents the number of minutes ranging from 00-59).

See message.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB072E

The percentage specified for the maxdur or mindur keyword is either not in the valid format or an unacceptable value has been specified. The correct format and acceptable values are: percentage % (where percentage is a number ranging from 0-1000000).

See message.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB200E

There is a syntax error. An object identifier (for example, a job name) is longer than the maximum number of bytes.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB201E

There is a syntax error. An object identifier (for example, a job name) must begin with an alphabetic character.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB202E

There is a syntax error. An object identifier (for example, a job name) contains non valid characters.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB206E

There is a syntax error. More than one parameter was specified.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB208E

There is a syntax error. The number of job stream dependencies exceeds the maximum number allowed.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB209E

There is a syntax error. The number of job dependencies exceeds the maximum number allowed.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB210E

Missing parameter ^^ was specified.

AWSBIB211W

The IN ORDER keyword must be the last keyword.

AWSBIB212E

No dependencies are allowed when IN ORDER is specified

AWSBIB213E

There is a syntax error. A blank name has been supplied.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB214E

There is a syntax error. The onuntil keyword has a non-valid value. Valid values are suppr, cont or canc.

See message.

The submitted command cannot be performed.

Check the syntax of the job stream definition. Change the value of the onuntil keyword to one of the indicated valid values and retry the operation.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB215E

There is a syntax error. Either the follows or matching keyword is not followed by one of the following keywords: previous, sameday, relative from, or from.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB216E

There is a syntax error. Expected the keyword set: from <time> to <time>.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB217E

There is a syntax error. Expected the keyword set: relative from <time> to <time> (<time> is expressed as HHMM, and the permitted values are between 0000 and 2359)

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB219E

There is a syntax error. More than one matching keyword has been supplied.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB220E

There is a syntax error. A non-valid job alias has been supplied.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB221E

There is a syntax error. A non-valid runcycle name has been supplied.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB222E

Duplicated runcycle name.

This is a parser error, please check the scheduling language

AWSBIB223E

There is a syntax error. A value has been supplied for a description keyword that is longer than the maximum length of "maximum_description_length" bytes.

See message.

maximum_description_length is the maximum length of the value of the description keyword.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB224E

There is a syntax error. An external string dependency has been supplied that is longer than the maximum length of "maximum_description_length" bytes.

See message.

maximum_description_length is the maximum length of the external string dependency.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB225E

There is a syntax error. An iCalendar name has been supplied that is longer than the maximum length of "maximum_description_length" bytes.

See message.

maximum_description_length is the maximum length of the iCalendar name.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB226E

There is a syntax error. A day[s] offset for a relative from <time> to <time> or a from <time> to <time> clause has been supplied that is greater than the maximum of "maximum_offset" days.

See message.

maximum_offset is the maximum number of offset days of the relative from or from clause.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB227E

There is a syntax error. An day[s] offset for an at, until, or deadline clause has been supplied that is greater than the maximum of "maximum_offset" days.

See message.

maximum_offset is the maximum number of offset days of the at, until, or deadline clause.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB228E

There is a syntax error. An every keyword has been supplied with a rate not in the range 0 - "maximum_rate".

See message.

maximum_rate is the maximum value that the everyrate can have. The rate is in the format hhmm.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB229E

An iCalendar cannot be empty.

This is a parser error, please check the scheduling language

AWSBIB230E

There is a syntax error. The keyword "keyword" is not correct at this position.

See message.

keyword is the keyword that is out of position.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB231E

There is a syntax error. A relative from <time> to <time> or a from <time> to <time> clause has been supplied where the from time is later than the to time.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB232E

There is a syntax error. The value specified for the onmaxdur keyword is not valid. Valid values are kill or cont.

See message.

The submitted command cannot be performed.

Check the syntax of the job stream definition. Specify a valid value for the onmaxdur keyword and retry the operation.

The User's Guide and Reference for full details about the scheduling language syntax.

AWSBIB233E

There is a syntax error. The value specified for the onmindur keyword is not valid. Valid values are confirm, abend or cont.

See message.

The submitted command cannot be performed.

Check the syntax of the job stream definition. Specify a valid value for the onmindur keyword and retry the operation.

The User's Guide and Reference for full details about the scheduling language syntax.

AWSBIB234E

There is a syntax error. A valid output condition name is required.

See message.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB235E

Condition names must be unique. A duplicate output condition name was specified.

A parser error has occurred, check the scheduling language.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB236E

Conditional dependency names must be unique. A duplicate conditional dependency name was specified.

A parser error has occurred, check the scheduling language.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for details about the valid composer syntax for a follows dependency.

AWSBIB237E

There is a syntax error. The conditional dependency name specified is not valid.

See message.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for details about the valid composer usage for a follows dependency.

AWSBIB238E

There is a syntax error. The conditional dependency expression you specified is not in context with a conditional dependency based on an output condition.

See message.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for details about the valid composer syntax for a follows dependency.

AWSBIB239E

There is a syntax error. The conditional dependency you specified is not in context with a conditional dependency based on the final status of the predecessor.

See message.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for details about the valid composer syntax for a follows dependency.

AWSBIB240E

There is a syntax error. The conditional dependency expression you specified is not in consistent with a conditional dependency based on the provided precedessor.

See message.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for details about the valid composer syntax for a follows dependency.

AWSBIB241E

There is a syntax error. The conditional dependency expression you specified is not in context with a conditional dependency based on when the predecessor job starts.

See message.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for details about the valid composer syntax for a follows dependency.

AWSBIB315E

Either a job or job stream identifier is missing, or the matching criteria is not valid.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB316E

There is a syntax error. A recovery action has been supplied that is not stop, continue, or rerun.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB317E

The path of a filename in the opens dependencies and its qualifier cannot exceed "dependency_file_name_max_length" bytes.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB318E

You cannot specify a time zone for the run cycle time dependencies.

See message.

The submitted command cannot be performed.

Correct the job stream definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB319E

There is an error in the job definition. The sum of the docommand string and the rccondsucc string must not be greater than "maximum_length" bytes.

See message.

maximum_length is the maximum length of the sum of the docommand string and the rccondsucc string.

The submitted command cannot be performed.

Correct the job definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB320W

The specified keyword is not allowed in a job definition outside a job stream.

See message.

The submitted command cannot be performed.

Correct the job definition and resubmit the command.

The Reference Manual for full details of the scheduling language syntax.

AWSBIB321E

A variable table name is expected at this point, but was not supplied.

See message.

The operation is not performed.

Correct the variable table reference in the job stream definition and retry the operation.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB322E

The variable table name exceeds the maximum length of "maximum_variable_table_size" bytes.

maximum_variable_table_size is the maximum size in bytes of the variable table.

The operation is not performed.

Correct the variable table reference in the job stream definition and retry the operation.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB323W

The tasktype keyword has been supplied for job definition "job_definition", for which it is not required. It has been ignored.

See message.

Processing continues, ignoring the tasktype field.

No action is required, but to avoid receiving this warning in future ensure to not specify the tasktype field when defining a job definition.

AWSBIB324W

The interactive keyword has been supplied for job definition "job_definition", for which it is not required. It has been ignored.

See message.

Processing continues, ignoring the interactive field.

No action is required, but to avoid receiving this warning in future ensure to not specify the interactive field when defining a job definition.

AWSBIB325E

The task definition supplied for job definition "job_definition" is not well formatted.

job_definition is the job definition to validate.

The operation is not performed.

Correct the task definition in the job definition and retry the operation.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB326E

There is a syntax error. The run cycle group name is not valid. The name must start with an alphabetical character, and can contain alphanumeric characters, dashes, and underscores. It can contain up to 40 bytes.

See message.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB327E

There is a syntax error. A valid run cycle subset name was expected but was not found. The subset name must start with either an alphabetical character or number, and can contain alphanumeric characters, dashes, and underscores. It can contain a maximum of 40 bytes.

See message.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB328E

There is a syntax error. The run cycle subset cannot be specified in the job stream definition.

See message.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB329E

There is a syntax error. The run cycle group name is not valid. The name must start with an alphabetical character, and can contain alphanumeric characters, dashes and underscores. It can contain up to 40 bytes.

See message.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB330W

The specified keyword cannot be defined in a run cycle group definition.

See message.

The submitted command cannot be performed.

Correct the run cycle group definition, specifying only suppported keywords, and submit the command again.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB331E

There is a syntax error. The end keyword is missing from the run cycle group definition.

See message.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB332E

There is a syntax error. The run cycle type run cycle group cannot be specified inside the run cycle group definition.

See message.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB333E

There is a syntax error. A value has been supplied for the subset keyword that is longer than the maximum length of "maximum_subset_length" bytes.

See message.

maximum_subset_length is the maximum length of the value of the subset keyword.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB334E

There is a syntax error. The runcyclegroup keyword is missing from the start of the run cycle group definition.

See message.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB335E

There is a syntax error. The every keyword is not followed by the everyendtime keyword.

See message.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB336E

There is a syntax error. The onoverlap keyword has a non-valid value. Valid values are parallel, donotstart or enqueue.

See message.

The submitted command cannot be performed.

Check the syntax of the job stream definition. Change the value of the onoverlap keyword to one of the indicated valid values and retry the operation.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB337E

There is a syntax error. The statisticstype keyword has a non-valid value. Valid values are automatic or custom.

See message.

The submitted command cannot be performed.

Check the syntax of the job stream definition. Change the value of the statisticstype keyword to one of the indicated valid values and retry the operation.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB338E

There is a syntax error. The number of joined conditional dependencies exceeds the maximum supported number.

A parser error has occurred, check the scheduling language.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB339E

There is a syntax error. The name of the joined conditional dependencies is not syntactically valid. The name must start with a letter, and can contain alphanumeric characters, dashes, and underscores. It can contain up to 16 bytes.

A parser error has occurred, check the scheduling language.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB340E

Joined conditional dependencies names must be unique. A duplicate name was specified.

A parser error has occurred, check the scheduling language.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB341E

There is a syntax error. The name of the joined conditional dependencies is not followed by the number of dependencies to be met.

A parser error has occurred, check the scheduling language.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB342E

There is a syntax error. The endjoin to close the joined conditional dependencies definition was not found.

A parser error has occurred, check the scheduling language.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB343E

There is a syntax error. The number of dependencies to be met in the joined conditional dependencies is not syntactically valid. The value must be a number between 0 and the total number of subsequent predecessors, or all.

A parser error has occurred, check the scheduling language.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB344E

There is a syntax error. The follows keyword was not found in the joined conditional dependencies definition.

A parser error has occurred, check the scheduling language.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB345E

There is a syntax error. Internetwork dependencies are not supported in joined conditional dependencies definition.

A parser error has occurred, check the scheduling language.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB346E

There is a syntax error. The description keyword has been specified, but the related text is not enclosed in quotes or is missing.

See message.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB347E

There is a syntax error. The return code condition expression is missing or is not enclosed in quotes.

See message.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB348E

The output condition name exceeds the maximum length of "maximum_output_cond_size" bytes.

maximum_output_cond_size is the maximum size in bytes of the output condition name.

The submitted command cannot be performed.

Correct the job stream or run cycle group or job definition and resubmit the command.

The User's Guide and Reference for full details of the scheduling language syntax.

AWSBIB349E

A syntax error has occurred at line "line_number": unexpected token "unexpected_token". The parsing operation has stopped at the token in error.

A parser error has occurred, check the scheduling language.

AWSBIB350E

A syntax error has occurred during the parsing operation of the object "object_name". The parsing operation has stopped.

A parser error has occurred, check the scheduling language.

AWSBIB351E

A syntax error has occurred during the parsing operation. The parsing operation has stopped.

A parser error has occurred, check the scheduling language.