AWSITA - Job management messages
This section lists error and warning messages that might be generated by the routines that handle job management.
The message component code is ITA.
AWSITA001E
The command is incorrect and cannot be processed.
There is an error in the communication protocol utilized.
The action is not performed.
If the user was trying to connect to the agent through the APIs, the developer should check the protocol utilized.
AWSITA002E
Cannot save the job with ID "job_id" in the job store.
An error occurred while saving the job instance in the job store of the agent. The job store is a persistent hashtable implemented on the file system.
The job is not submitted to the endpoint.
Check the trace file.
AWSITA003E
Cannot cancel the job with ID "job_id" because it is not present in the agent job store.
An error occurred while retrieving the job instance in the job store of the agent. The job store is a persistent hashtable implemented on the file system.
This can happen if the job is not valid, if the job was already archived, or if the job store is incorrectly structured.
More detailed information about this error is available in the trace file on the agent.
The job is not cancelled.
If the job is not valid, this is more likely a script error. If the job was archived, no action is required.
AWSITA004E
Cannot find the executor for the job with ID "job_id".
This can happen only if there is an inconsistency in the job store or if the job instance in the job store points to an executable that is no longer available.
The job is not cancelled.
If a patch was rolled back, reapply the patch before cancelling this job.
AWSITA005E
Unable to create the spool directory "spool_direcory" to store the output data of the job. The error is "error_message".
The agent was creating a directory to store the output and the results of the jobs, but there was an error while creating this directory.
The job cannot run.
Check the error message.
AWSITA007E
Cannot get the output of the job with ID "job_id" because it is not available in the agent job store.
An error occurred while retrieving the job instance in the job store of the agent. The job store is a persistent hashtable implemented on the file system.
This can happen if the job is not valid, if the job was already archived, or if the job store is incorrectly structured.
More detailed information about this error is available in the trace file on the agent.
None
If the job is not valid, this is more likely a script error. If the job was archived, no action is required.
AWSITA008E
Cannot find the executor for the job with ID "job_id".
This can happen only if there is an inconsistency in the job store or if the job instance in the job store is referring to an executable that is no longer available.
None
If a patch was rolled back, reapply the patch before getting the job output.
AWSITA009E
Unable to start the task launcher "task_launcher_binary" to store the output data of the job. The error is "error_message".
The agent is attempting to start the task launcher but the process fails.
The job cannot run.
Check the error message.
AWSITA010W
The job has completed or was previously cancelled.
The job has either completed or was previously cancelled.
None
None
AWSITA011E
The job definition is missing from the job submit operation.
This error is due to a protocol error in the job submit operation.
The job is not submitted to the endpoint.
If the user was trying to connect to the agent through the APIs, the developer should check that the jmgr:JobDefinitionDocument stanza is present.
AWSITA012E
The job cancel task failed while it was getting the information to connect to the job monitor. The error is "error_message".
An error occurred while cancelling the job on the agent.
The job is not cancelled.
Check the error message.
AWSITA013E
The job cancel task failed while it was creating a connection to the job monitor. The error is "error_message".
An error occurred while cancelling the job on the agent.
The job is not cancelled.
Check the error message.
AWSITA014E
The job cancel task failed while it was connecting to the job monitor. The error is "error_message".
An error occurred while cancelling the job on the agent.
The job is not cancelled.
Check the error message.
AWSITA015E
The job cancel task failed while it was contacting the job monitor. The error is "error_message".
An error occurred while cancelling the job on the agent.
The job is not cancelled.
Check the error message.
AWSITA016E
The job cancel task failed to reconnect to the job monitor. The error is "error_message".
An error occurred while cancelling the job on the agent.
The job is not cancelled.
Check the error message.
AWSITA017E
The job cancel task failed while it was sending the cancel command to the job monitor. The error is "error_message".
An error occurred while cancelling the job on the agent.
The job is not cancelled.
Check the error message.
AWSITA018E
Unable to get the job output because of a a problem while reading the "output_file" output file . The error is "error_message".
The agent returned an error while it was creating a UTF8 version of the output file.
The job output is not returned.
Check the agent trace file.
AWSITA019E
The get job output task failed while it was opening the output file. The error is "error_message".
The agent failed to open the converted version of the output file.
The job output is not returned.
Check the error message.
AWSITA020E
The get job output task failed because the start parameter value looks higher than the output length. The error is "error_message".
The agent failed to find the start position inside the utf8 conversion file of the job output.
The job output is not returned.
Check the error message.
AWSITA021E
The get job output task failed because it ran into an error as it was reading the output file. The error is "error_message".
The agent failed to read the utf8 conversion file of the job output.
The job output is not returned.
Check the error message.
AWSITA022E
Unable to get the job output because the "output_file" output file does not exist.
The output file does not exist. This can only happen if the job did not start.
The job output is not returned.
Check the agent trace file.
AWSITA023E
Cannot get the output of the job with ID "job_id" because the job has not started yet.
The output file does not exist because the job has not started yet.
The job output is not returned.
None.
AWSITA024E
The job failed to start because the error "error_message" was returned while preparing the process attributes of the task launcher.
There was an internal error while creating the process attributes of the task launcher.
The job is not started.
Check the error message.
AWSITA025E
The job failed to start because the error "error_message" was returned while setting the process attributes of the task launcher.
There was an internal error while setting the process attributes of the task launcher.
The job is not started.
Check the error message.
AWSITA026E
The job failed to start because the error "error_message" was returned while setting the command type of the task launcher.
There was an internal error while setting the process command type of the task launcher.
The job is not started.
Check the error message.
AWSITA027E
The job failed to start because the error "error_message" was returned while creating the arguments to drive the task launcher.
There was an internal error while creating the arguments to drive of the taks launcher.
The job is not started.
Check the error message.
AWSITA028E
The job failed to start. The following error has been generated: "error_description".
The job failed to start. See the error message to find what went wrong.
The job is not started.
Check the error message.
AWSITA029E
The job has terminated with signal "signal_number".
The job was killed by a signal.
The job was killed by a signal.
See the job log.
AWSITA030E
The job failed.
The job failed.
The job failed.
See the job log.
AWSITA032E
The job with ID "job_id" failed to start. The error is "error_message".
The error returned in the error message occurred while starting the job.
The job is not started.
Check the error message.
AWSITA033E
The job with ID "job_id" completed with error: "error_message".
The error returned in the error message occurred while the job was running.
The job completed but returned an error.
Check the error message
AWSITA036W
Cannot get the status of the job with ID "job_id". The error is "error_message".
The task launcher is not returning the status of the job.
The job completed but returned an error.
Check the job trace file or job output to understand if the job completed and if it succeeded or not.
AWSITA037E
Failed to create the memory pool of the thread that will execute the job. The error is "error_message".
The job manager was allocating a memory pool for the thread of the task launcher, but there was an error while allocating this memory pool.
The job will not start.
Check the error message.
AWSITA038E
Failed to schedule the thread that will execute the job. The error is "error_message".
The job manager was scheduling the thread of the task launcher, but there was an error.
The job will not start.
Check the error message.
AWSITA039E
Cannot find the executor for application "application_name".
This can happen only if the application in the JSDL is not supported.
The job is not started.
Modify the job definition.
AWSITA040E
Cannot save the job with ID "job_id" in the job store.
An error occurred while saving the job instance in the job store of the agent. The job store is a persistent hashtable implemented on the file system.
The result is unpredictable.
Check the trace file.
AWSITA041E
Unable to get the list of the jobs because the error: "error_message" was returned while reading the job store file with key"key".
The job store is corrupted or cannot be accessed.
The job list is not returned.
Check the error message.
AWSITA042E
Failed to create the memory pool of the job manager thread. The error is "error_message".
An error occurred while the job manager was allocating a memory pool for a thread needed to reconnect the task launcher to the jobs.
The jobs are not archived and the job manager is not contacting the task launcher of the jobs that are running when the job manager is started.
Check the error message.
AWSITA043E
The job manager failed schedule the thread needed to reconnect the task launcher to the jobs. The error is "error_message".
An error occurred while the job manager was starting a thread needed to reconnect the task launcher to the jobs.
The jobs are not archived and the job manager is not contacting the task launcher of the jobs that are running when the job manager is started.
Check the error message.
AWSITA044E
Failed to create the memory pool for the thread that will reconnect to the task launcher of the job with ID "job_id". The error is "error_message".
An error occurred while the job manager was allocating a memory pool for the thread of the task launcher.
The job will not be monitored.
Check the error message and restart the agent to attempt to reconnect again.
AWSITA045E
Failed to create the thread that will reconnect to the the job with ID "job_id". The error is "error_message".
An error occurred while the job manager was starting the thread of the task launcher.
The job will not be monitored.
Check the error message and restart the agent to attempt to reconnect again.
AWSITA046E
Cannot find the executor for the job with ID "job_id" while reconnecting to the task launcher.
This can happen only if there is an inconsistency in the job store or if the job instance in the job store is referring to an executable that is no longer available.
The job will not be monitored.
If a patch was rolled back, apply the patch and then restart the agent.
AWSITA048E
The subagent cannot be created. The error is "error_message". The error code is "error_code".
The subagent cannot be created due to the reason detailed in the error message.
The agent is not started.
Check the error message and restart the agent.
AWSITA049E
Cannot create the memory pool to handle the connection. The error is "error_message". The error code is "error_code".
The subagent cannot be created due to the reason detailed in the error message.
The agent is not started.
Check the error message and restart the agent.
AWSITA051E
The agent failed to accept connections. The error is "error_message". The error code is "error_code".
The error message provides details.
The request is not served and the agent will attempt a new connection in 10 seconds.
Check the error message and restart the agent.
AWSITA053E
The agent failed to create the thread needed to handle the request. The error is "error_message". The error code is "error_code".
The error message provides details.
The request is not served and the agent will attempt a new connection in 10 seconds.
Check the error message.
AWSITA054E
The task type "task_type" specified within the definition of the extended agent job with ID "job_id" is either unknown or unsupported.
An invalid task type was specified in the job definition.
The job does not start.
Open the extended agent job definition and correct the task type.
AWSITA055E
An error occurred while waiting to receive the IP address from where the task launcher will listen when it communicates with the job manager. The error is "error_message".
The task launcher did not return to the job manager the IP address from where it is going to listen. The reason for this error is to be looked for in the task launcher.
The job is not started.
Check both the error message and the task launcher log located in the job output directory.
AWSITA056E
An error occurred while waiting to receive the IP port where the task launcher will listen when it communicates with the job manager. The error is "error_message".
TThe task launcher did not return to the job manager the IP port from where it is going to listen. The reason for this error is to be looked for in the task launcher.
The job is not started.
Check both the error message and the task launcher log located in the job output directory.
AWSITA057E
A request was made to reconnect to job "job_id" that is not running.
The job manager is trying to reconnect to a job that is not in the EXECUTING state. This error should not take place.
The job manager does not reconnect to this job.
If the problem persists, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.
AWSITA058E
Reconnection to job "job_id" failed while getting the information to connect to the job monitor. The error is "error_message".
An error occurred while reconnecting the job on the agent.
The job is not reconnected to the endpoint.
Check the error message.
AWSITA059E
Reconnection to job "job_id" failed while creating the connection to the job monitor. The error is "error_message".
An error occurred while reconnecting the job on the agent.
The job is not reconnected to the endpoint.
Check the error message.
AWSITA060E
Reconnection to job "job_id" failed while connecting to the job monitor. The error is "error_message".
An error occurred while reconnecting the job on the agent.
The job is not reconnected to the endpoint.
Check the error message.
AWSITA061E
The access method specified to launch "job_id" is unknown. Check either the JobManager.ini file on the agent or the job definition.
An unknown target or access method is specified in the job definition.
The job is not started.
Check that the target job in the extended agent is correct in the job definition. Verify that the JobManager.ini file on the agent points to the correct access method.
AWSITA062E
The options file of extended agent "target_name" includes option UTF8cmdline set to 1, which is not supported. Set it to 0 and rerun the job.
See message.
The job is not started.
Correct the options file in the extended agent by setting UTF8cmdline equal to zero.
AWSITA063E
Could not change to the specified working directory.
See message..
The job does not run.
Check the path of the working directory specified in the JSDL definition.
AWSITA064E
The "execuser" login user specified in the job definition could not authenticate on the agent
See message..
The job does not run.
Check the login user specified in the job definition. For Windows job types, ensure that the user was correctly configured.
AWSITA065E
The group name is incorrect.
See message..
The job does not run.
Check the group name specified in the JSDL definition.
AWSITA066E
Privileged user is not allowed to run jobs on this executor.
See message..
The job does not run.
AWSITA067E
An error occurred setting the process group ID.
See message..
The job does not run.
AWSITA068E
An error occurred impersonating the user specified in the job definition.
See message..
The job does not run.
AWSITA069E
Job monitor internal error (return code "error_code")
See message..
The job does not run.
AWSITA070E
Cannot open the specified input file.
See message..
The job does not run.
Check the path of the input file specified in the JSDL definition.
AWSITA071E
Cannot open the internal output log file.
See message..
The job does not run.
AWSITA072E
Cannot open the internal error log file.
See message..
The job does not run.
AWSITA073E
Cannot open the specified output file.
See message..
The job does not run.
Check the path of the output file specified in the JSDL definition.
AWSITA074E
Cannot open the specified error file.
See message..
The job does not run.
Check the path of the error file specified in the JSDL definition.
AWSITA075E
Error creating the job process (return code "error_code").
See message..
The job does not run.
AWSITA077E
Abnormal end of job (the exit code is the termination signal number).
See message..
AWSITA079E
Unable to convert a specified parameter to the local codeset.
See message..
The job does not run.
AWSITA080E
The Job Executor Agent cannot find the executable file specified in the JSDL definition.
See message..
The job does not run.
Check the path to the executable file specified in the JSDL definition. In the Job Brokering Definition Console, this path is specified in the Executable File field in the Application pane. If the executable is a shell command, change the executable type to Script in the Application pane of the Job Brokering Definition Console.
For further troubleshooting, check the trace.log file for this job.
AWSITA081E
The agent can not send the resource information to "server_uri". The error is: "error_message".
The resource information is not sent to the server. If the error persists, the agent is down.
Analyze the error and perform the correct action.
AWSITA082E
The agent got an error response while sending the resource information to the server. The error code is "error_code" and the error message is "error_message".
See message..
The resource information is not sent to the server. If this error persists, the computer system will result as unavailable.
None
AWSITA084W
The Resource Advisor Agent is disabled and will not start. Check the ResourceAdvisorUrl property in the JobManager.ini file.
The user disabled the Resource Advisor Agent in the JobManager.ini file.
The Resource Advisor Agent does not start and the agent is not available on the workload broker.
Set the ResourceAdvisorUrl in the JobManager.ini file to a valid value to enable the Resource Advisor Agent.
AWSITA085E
Failed to create the memory pool of the command handler thread. The error is "error_message".
An error occurred while the command handler was allocating a memory pool.
The agent does not start.
Check the error message.
AWSITA086E
Failed to create the thread pool of the Job Manager. The error is "error_message".
An error occurred while the job manager was creating a thread pool.
The agent does not start
Check the error message.
AWSITA087E
Failed to create the memory pool of the Job Status Notification Manager. The error is "error_message".
An error occurred while the Job Status Notification Manager was allocating a memory pool.
The job status change events are not sent to the server.
Check the error message.
AWSITA088E
Failed to create the thread pool of the Job Status Notification Manager. The error is "error_message".
An error occurred while the Job Status Notification Manager was creating the thread pool.
The job status change events are not sent to the server.
Check the error message.
AWSITA089E
The thread of the Job Status Notification Manager failed to start. The error is "error_message".
An error occurred while starting Job Notifier.
The job status change events are not sent to the server.
Check the error message.
AWSITA091W
The Job Status Notification Manager is already running.
An unexpected attempt to start the Job Status Notification Manager occurred.
None.
None.
AWSITA093W
The thread of the Job Status Notification Manager is already stopped.
An unexpected attempt to stop the Job Status Notification Manager occurred.
None.
None.
AWSITA094E
Failed to schedule the thread that will send notification for the job status changes. The error is "error_message".
The Job Status Notification Manager was scheduling the thread to send the job status change to the server, but there was an error.
The job status change is not sent.
Check the error message.
AWSITA095E
Unable to change the following configuration properties: "error_message".
The name of the listed properties is invalid or an error occurred while they were being updated.
The listed properties will not be updated
Check the correct name of the listed properties.
AWSITA096E
An error occurred while waiting to receive the local job process id. The error is "error_message".
The task launcher did not return to the job manager the local job process id. The reason for this error is to be looked for in the task launcher.
The job is not started.
Check both the error message and the task launcher log located in the job output directory.
AWSITA097E
Unable to cancel the job because the specified job ID is not valid.
The job ID contains invalid or unexpected characters.
The job is not cancelled.
Check the correct syntax of the job ID.
AWSITA098E
Unable to get the job output because the specified job ID is not valid.
The job ID contains invalid or unexpected characters.
The job output is not returned.
Check the correct syntax of the job ID.
AWSITA099E
Unable to get the job properties because the specified job ID is not valid.
The job ID contains invalid or unexpected characters.
The job properties are not returned.
Check the correct syntax of the job ID.
AWSITA100E
Unable to get the job(s) properties because the specified job alias "job_alias" is not valid.
The job alias contains invalid or unexpected characters.
The job(s) properties are not returned.
Check the correct syntax of the job alias.
AWSITA101E
Unable to get the job(s) properties because the specified job status "job_status" is not valid.
The job status contains invalid or unexpected characters.
The job(s) properties are not returned.
Check the correct syntax of the job status.
AWSITA102E
Unable to change the configuration properties because the specified XML request "xml_request" is not valid.
The XML request contains invalid or unexpected characters/sections.
The configuration properties are not changed.
Check the correct syntax of the XML request.
AWSITA103E
Unable to perform the dynamic resources scan. The error is "error_message".
See message..
The dynamic resources scan is not performed.
None
AWSITA104E
Unable to perform the system resources scan. The error is "error_message".
See message..
The system resources scan is not performed.
None
AWSITA105E
Unable to notify scan results to the server because of a resources scanner error.
See message..
The scan results are not sent to the server.
None
AWSITA106E
The agent failed to accept a connection.
The agent process returned a NULL while accepting a connection.
The request is not served and the agent will attempt a new connection in 10 seconds.
None.
AWSITA107E
Could not load the library "library name". The error is "error_message".
There was an error loading a dynamic library.
A library was not loaded.
Check the error message.
AWSITA108E
Unable to get port information from URI "uri_value".
Port information is missing or not valid.
The attempt to connect to the URI failed.
Check that the port information is specified correctly in the URI.
AWSITA110E
Unable to send the notification of status of the job with ID "job_id" to the URI "uri_value".
The URI is not valid or the server accepting connections on that URI is down
The attempt to connect to the URI failed.
Check that the URI is valid and/or that the server accepting connections on that URI is up and running.
AWSITA114E
The job cannot start since the user is missing in the job definition.
If the RequireUserName variable is set to true in the JobManager.ini configuration file, the user name is required in the job definition.
The job is not started.
Change the job definition or disable the RequireUserName setting in the JobManager.ini configuration file.
AWSITA117E
The Java method call request is not correct: "elem" is missing.
The XML request does not contain a required sections.
The method call is not performed.
Check the correct syntax of the XML request.
AWSITA118E
A Java Exception occurred while running job "job". "error"
An unexpected error occurred while running a Java method.
The Java method does not complete.
If the problem persists, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.
AWSITA119E
A Java exception occurred while retrieving the output of job "job". "error"
An unexpected error occurred while running a Java method.
The Java method does not complete.
If the problem persists, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.
AWSITA120E
A Java exception occurred while retrieving the length of the output of job "job". "error"
An unexpected error occurred while running a Java method.
The Java method does not complete.
If the problem persists, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.
AWSITA121E
An error occurred while calling a Java method: "elem" is null.
An unexpected error occurred while running a Java method.
The Java method does not complete.
If the problem persists, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.
AWSITA122E
A Java exception occurred while calling the command "command". "error"
An unexpected error occurred while running a Java method.
The Java method does not complete.
If the problem persists, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.
AWSITA123E
A Java Exception occurred while canceling job "job". "error"
An unexpected error occurred while running a Java method.
The Java method does not complete.
If the problem persists, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.
AWSITA124E
A Java Exception occurred in "method". "error"
An unexpected error occurred while running a Java method.
The Java method does not complete.
If the problem persists, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.
AWSITA125E
Cannot find a suitable application job plug-in for "plug-in".
The agent is attempting to call a command on application job plug-in that is not available.
The command is not completed.
Verify that you are calling the command on the correct agent.
AWSITA126E
Malformed JSON string: error "error" at position "position".
See message..
The command is not completed.
If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm..
AWSITA127E
Access Method field is empty.
The required field access method was not filled before invoking the picklist.
The command is not completed.
Verify if you filled the access method field before running picklist.
AWSITA128E
No method found.
The methods directory is empty or not accessible.
The command is not completed.
Verify if the methods directory is empty or not accessible.
AWSITA129E
No option file found for the method "string".
The method does not have options files.
The command is not completed.
Verify if the methods has options files.
AWSITA130E
The option file "string" does not exist.
See message..
The command is not completed.
Verify if the specified option file exists.
AWSITA131E
The option file "string" is too big.
See message..
The command is not completed.
Verify the size of the option file.
AWSITA132E
Unable to access to the option file "string".
See message..
The option file is accessible.
Verify if the specified option file is accessible.
AWSITA139E
The requested operation cannot be completed. The error is: "error_msg"
See message..
The command is not completed.
Verify the parameters passed to the operation.
AWSITA140E
Option File field is empty.
The field option file was not filled before invoking the picklist.
The command is not completed.
Verify if you filled the option file field before running picklist.
AWSITA141E
The job cannot start because the job definition does not include either the executable or the script field.
Field executable or script is required in the job definition.
The job is not started.
Change the job definition.
AWSITA142E
Missing variable name after "string" option.
See message..
The command is not completed.
Specify the variable name after the option flag.
AWSITA143E
Unexpected command argument(s) found.
See message..
The command is not completed.
Run the command with the -u option to see the command usage and then look for the incorrect argument(s).
AWSITA145E
The value cannot be empty.
See message..
The command is not completed.
Enter a value for the variable.
AWSITA147E
Unknown option "string".
See message..
The command is not completed.
Run the command with the -u option to see the command usage and then specify a valid option.
AWSITA150E
Cannot set variable "string" to value "string" because of this error: "string"
See message..
The command is not completed.
Check the error message and take action.
AWSITA151E
Cannot get the value of variable "string" because of this error: "string"
See message..
The command is not completed.
Check the error message and take action.
AWSITA152E
Cannot remove variable "string" because of this error: "string"
See message..
The command is not completed.
Check the error message and take action.
AWSITA153E
Unable to load the "string" variables file because of this error: "string"
See message..
The command is not completed.
Check the error message and take action.
AWSITA154E
Unable to update the "string" variables file because of this error: "string"
See message..
The command is not completed.
Check the error message and take action.
AWSITA155E
Cannot get the namespace details for variable "string".
See message..
The command is not completed.
Ensure that the syntax of the variable name follows the [[<filename>.]<sectionname>.]<variablename> pattern. You can omit the filename only if the variable is located in the jm_variables default file. You can omit the section name only if the variable is not within a section. Retry the command using wildcard *; for example, *.*.<variablename>.
AWSITA156E
Cannot find variable "string"."string"."string".
See message..
The command is not completed.
Ensure that you entered the correct file name, section name, and variable name.
AWSITA157E
Cannot find section "string" within file "string".
See message..
The command is not completed.
Ensure that you entered the correct section name.
AWSITA158E
Cannot get a list of the sections of file "string".
See message..
The command is not completed.
Check that you entered the command correctly. Run the command with the -u option to see the command usage.
AWSITA159E
Cannot encrypt variable "string"."string"."string".
The encrypting algorithm ran into an error.
The variable is not defined.
Use the param command to delete the variable and define it once again.
AWSITA160E
Cannot decrypt the variable "string"."string"."string".
The decrypting algorithm ran into an error.
The variable is not decrypted.
Use the param command to delete the variable and define it once again.
AWSITA161E
Unable to create directory "string" to store the variables file. The error is: "string"
The agent ran into an error while creating the directory for the variables file.
The command was unsuccessful and the variable was not created.
Check the error message and take action.
AWSITA162E
Cannot create variable "string"."string"."string".
See message..
The command is not completed.
Check that you entered the command correctly. Run the command with the -u option to see the command usage.
AWSITA163E
Cannot create variable "string" because the '*' and/or '?' characters are included in its name.
The asterisk and question mark are used as wildcard characters to list or delete variables or their namespaces and cannot be used to define them.
The command is not completed.
Check that no '*' and/or '?' chars are contained within the variable name.
AWSITA164E
Cannot remove variable "string"."string"."string".
See message..
The command is not completed.
Check that you entered the command correctly. Run the command with the -u option to see the command usage.
AWSITA165E
Variable syntax error. End tag "string" not found.
An agent variable has the following syntax: ${agent:<variable>}, but the end tag was not found.
The action is not completed.
Check the agent variable syntax.
AWSITA166E
Cannot set the following variables:"string"
See message..
The action is not completed.
Check the error messages for each variable.
AWSITA167E
Cannot set the variables because the specified XML request "string" is not valid or is empty.
See message..
The action is not completed.
Check that the XML request is valid and not empty.
AWSITA172E
The value you entered does not match the previous value.
See message..
The action is not completed.
Check that the entered values are the same.
AWSITA173E
Cannot update the specified trace property value because of this error: "string"
See message..
The command is not completed.
Check the error message and take action.
AWSITA174E
Cannot obtain the trace properties values because of this error: "string"
See message..
The command is not completed.
Check the error message and take action.
AWSITA177E
The value specified for command argument "string" must be a valid positive integer.
See message..
The command is not completed.
Enter a valid positive integer for the specified argument.
AWSITA178E
The value specified for variable "string" exceeds the allowed maximum size.
See message..
The command is not completed.
Enter a value with a smaller length
AWSITA179E
Cannot find variable "string".
See message..
The command is not completed.
Ensure that the variable specified exists.
AWSITA180E
Cannot obtain a valid date from variable "string" value.
See message..
The command is not completed.
Ensure that the variable value is correct.
AWSITA181E
Cannot obtain the value of parameter "string" from url.
See message..
The command is not completed.
Ensure that all parameters are correctly specified.
AWSITA182E
Unable to fill the job header because the specified job ID is not valid.
The job ID contains invalid or unexpected characters.
The command is not completed.
Check the correct syntax of the job ID.
AWSITA184E
Cannot invoke the rerun or restart command for the job with ID "jobId" because it is not available in the agent job store.
See message..
The job is not restarted.
Make sure the MaxAge parameters is correctly configured in the JobManager.ini file.
AWSITA185E
Malformed JSON string restarting the job: error "error" at position "position".The json string with the error is "jsonString"
See message..
The job is not restarted.
If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm..
AWSITA186E
Malformed JSON string restarting the job: the parameter "parameter" is missing.The json string with the error is "jsonString"
See message..
The job is not restarted.
If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm..
AWSITA187E
Malformed JSON string invoking a job command: error "error" at position "position".The json string with the error is "jsonString"
See message..
The job action is not executed.
If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm..
AWSITA188E
The rerun action cannot be performed because the job is still running or did not start yet.
This can happen if a the rerun action is invoked from different users at the same time.
The rerun is not executed.
Check the job status an
AWSITA189E
The rerun action cannot be performed because of errors accessing the agent job store.
See message..
The rerun is not executed.
If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm..
AWSITA190E
The rerun action cannot be performed because there was an error saving the job with ID "job_id" in the job store.
An error occurred while saving the job instance in the job store of the agent. The job store is a persistent hashtable implemented on the file system.
The rerun is not executed.
Check the trace file.
AWSITA191E
You specified the parameter "parameter_name" without the required argument.
See message..
The command does not run.
Add the missing parameter and run the command again.
AWSITA192E
You specified the same parameter "parameter_name" twice.
See message..
The command does not run.
Remove the duplicated parameter and run the command again.
AWSITA193E
You specified two mutually exclusive parameters.
See message..
The command does not run.
Verify the syntax of command using the -u option. Resubmit the command specifying only one of the two parameters.
AWSITA194E
The .ini file "property_file" cannot be loaded. The error is: "error_message".
See message..
The command does not run.
Perform the action indicated in the error message and submit the command again.
AWSITA195E
You specified an invalid port number "port_number".
See message..
The command does not run.
Modify the command syntax specifying a valid port number and submit the command again.
AWSITA196E
You specified an invalid protocol "protocol". Valid values are http and https.
See message..
The command does not run.
Modify the command syntax specifying a valid protocol and submit the command again.
AWSITA197E
The property "file"."section"."property" cannot be loaded from the .ini file"iniFile".
See message..
The command does not run.
Open the ini file and add the required property.
AWSITA198E
You did not specify a value for the port number, either in the command line arguments or in the .ini file.
See message..
The command does not run.
Modify the command syntax by specifying a valid port number or add the required property in the .ini file and submit the command again.
AWSITA199E
An internal error occurred when configuring the open SSL communication.
See message..
The command does not run.
Verify that the password_file property was set correctly in the .ini file.
AWSITA200E
An error occurred when contacting the agent at the following address: "protocol"://"hostname":"port". The error is: "error_message".
See message..
The command does not run.
Verify that the agent is up and running, that the port you specified is correct, and that the host name or IP address is correct.
AWSITA201E
An error occurred when allocating memory. The error is: "error_message".
See message..
The command does not run.
Verify that there is memory available and that the ulimit settings are not limiting the memory usage of a process.
AWSITA202E
An error occurred when opening the zip file "zip_file". The error is: "error_message".
See message..
The command does not run.
Verify that the path of the zip file is correct and that you have the permissions required to create the file.
AWSITA203E
An error occurred when writing the zip file "zip_file". The error is: "error_message".
See message..
The command does not run.
Verify that the path to the zip file is correct and that you have the permissions required to create the file.
AWSITA205E
You specified an invalid port number "port_number" for the protocol "protocol" in the .ini file "ini_file". The valid range is from 1 to 65535.
See message..
The command does not run.
Specify the correct port number, either in the property for the port of that protocol in the .ini file or in the command line.
AWSITA206E
The following error was returned by the agent: "error_message".
See message..
The command does not run.
Check the error returned by the agent and take the appropriate action. This error message can occur if the agent is not at the correct fix pack level.
AWSITA207E
An unexpected error was returned by the agent. The following error message has more details: "error_message".
See message..
The command does not run.
Check the error returned by the agent and take the appropriate action. This error message can occur if the JobManager process is down or if you did not specify the agent port.
AWSITA208E
An error occurred trying to establish the connection to the agent using the following address: "protocol"://"hostname":"port". The agent is down or the port is incorrect.
See message..
The command does not run.
Verify that the agent is up and running, that the port you specified is correct, and that the host name or IP address is correct.
AWSITA209E
The agent can not send the resource information to "server_uri" for a network connection problem. The error is: "error_message".
See message..
The resource information is not sent to the server. If the error persists, the agent is down.
Analyze the error and perform the correct action.
AWSITA211W
Failed to set the stack size of command handler thread pool. The error is "error_message".
An error occurred while setting the stack size of the command handler thread pool.
The default stack size is used.
Check the error message.
AWSITA212E
Failed to create the thread pool of the command handler. The error is "error_message".
An error occurred while the command handler was creating the thread pool.
The agent does not start.
Check the error message.
AWSITA229E
The wappman command cannot run because one or more input arguments are missing.
See message..
The command is not completed.
Run the command specifying the -u option to display the command usage, and then resubmit the command with the correct arguments.
AWSITA230E
An error was encountered processing the properties file "property_file_name".
See message..
The command cannot complete.
Ensure that the properties file exists and that you have the required access rights to the file. Also, ensure that the properties file is well formed.
AWSITA231E
The connection property "property_name" must be specified.
A required connection property was not specified. Specify the connection property either in the command string, in the custom properties file, or in either of the useropts or localopts files.
The command cannot complete.
Modify the command to include the missing connection property or add it to a property file and then resubmit the command.
AWSITA236E
An error was encountered reading the file "file_name".
See message..
The command cannot complete.
Ensure that the file exists and that you have the required access rights to the file.
AWSITA237E
The protocol must be either HTTP or HTTPS.
See message.
The command cannot complete.
Modify the protocol connection property to either HTTP or HTTPS and then resubmit the command.
AWSITA238E
The user is not authorized to access the server.
See message.
The command cannot complete.
Verify the user and password specified and modify either the command string, custom properties file, or useropts file with the correct user and password and then resubmit the command.
AWSITA241E
An error occurred creating the file "file_name" that stores the result of the HTTP request. The error is "error_message".
>See message.
The operation is not completed.
Check the error message.
AWSITA242E
An error occurred writing the file "file_name" that stores the result of the HTTP request. The error is "error_message".
>See message.
The operation is not completed.
Check the error message.
AWSITA243E
An error occurred writing the file "file_name" that stores the result of the HTTP request. The error is "error_message".
>An error occurred flusing the file on disk
The operation is not completed.
Check the error message.
AWSITA244E
An error occurred closing the file "file_name" that stores the result of the HTTP request. The error is "error_message".
>See message.
The operation is not completed.
Check the error message.
AWSITA245E
An error occurred getting the response of the HTTP request. The error is "error_message".
>See message.
The operation is not completed.
Check the error message.
AWSITA246E
An error occurred getting the response of the HTTP request. The error is "error_message".
>See message.
The operation is not completed.
Check the error message.
AWSITA247E
An error occurred invoking a POST HTTP request. The error is "error_message".
>See message.
The operation is not completed.
Check the error message.
AWSITA248E
An error occurred invoking a GET HTTP request. The error is "error_message".
>See message.
The operation is not completed.
Check the error message.
AWSITA249E
An error occurred getting the response of the HTTP request. The error is "error_message".
>See message.
The operation is not completed.
Check the error message.
AWSITA250E
An error occurred connecting to "hostname". The error is "error_message".
>See message.
The operation is not completed.
Check the error message.
AWSITA251E
Cannot connect to "hostname" because the protocol "protocol" is not supported.
>See message.
The operation is not completed.
Check the error message.
AWSITA252E
An error occurred connecting to "hostname". The error is "error_message".
>See message.
The operation is not completed.
Check the error message.
AWSITA253E
An error occurred connecting to "hostname".
>See message.
The operation is not completed.
Check the error message.
AWSITA255E
The Event Driven Workload Automation component cannot start because an error occurred creating a thread. The error message is "error_message".
>The thread that takes care of managing the Event Driven Workload Automation did not start.
The Event Driven Workload Automation feature did not start.
If the error is temporary, restart the agent.
AWSITA256E
The Event Driven Workload Automation component cannot start because an error occurred allocating a memory pool. The error message is "error_message".
>The thread that takes care of managing the Event Driven Workload Automation did not start.
The Event Driven Workload Automation feature did not start.
If the error is temporary, restart the agent.
AWSITA258E
The active rules output task failed while opening the configuration file. The error is "error_message".
The agent failed to open the converted version of the configuration file.
The active rules output is not returned.
Check the error message.
AWSITA259E
The active rules output task failed because the start parameter value looks higher than the output length. The error is "error_message".
The agent failed to find the start position inside the UTF-8 conversion file of the active rules output.
The active rules output is not returned.
Check the error message.
AWSITA260E
The active rules output task failed because it encountered an error reading the configuration file. The error is "error_message".
The agent failed to read the UTF-8 conversion file of the active rules output.
The active rules output is not returned.
Check the error message.
AWSITA261E
Unable to return the active rules output because the "output_file" configuration file does not exist.
The output file does not exist. This occurs when Monman does not start.
The active rules output is not returned.
Check the agent trace file.
AWSITA262E
The user cannot launch this job because he does not have the required permissions.
>The user does not have the required permission to run the job.
The job does not run.
Modify the permissions of the file to allow the user to launch it.
AWSITA264E
The parameter, "parameter", has been specified more than once.
See message.
The operation is not completed.
Specify the parameter only once.
AWSITA265E
The parameters, "parameter_1" and "parameter_2", cannot both be specified.
See message.
The operation is not completed.
Specify only one of the indicated parameters.
AWSITA266E
The value specified for the parameter "parameter" is not valid.
See message.
The operation is not completed.
Specify a supported value for the specified parameter.
AWSITA267E
The sendevent command cannot run because one or more input arguments is missing.
See message..
The command is not completed.
Run the command specifying the -u option to display the command usage, and then resubmit the command with the correct arguments.
AWSITA268E
A value has not been specified for parameter "parameter".
See message.
The operation is not completed.
Specify a value for the specified parameter.
AWSITA269E
The specified parameter, "parameter", is not valid.
See message.
The operation is not completed.
Specify a valid parameter.
AWSITA270E
The format of the argument, "argument", is not valid.
See message.
The operation is not completed.
Specify a valid format for the argument..
AWSITA271E
The mandatory parameters, "parameter1" and "parameter2", are missing.
See message.
The operation is not completed.
Specify all required parameters.
AWSITA272E
The mandatory parameter, "parameter", is missing.
See message.
The operation is not completed.
Specify the mandatory parameter and retry the operation.
AWSITA273E
The template configuration file, "file_name", does not exist.
See message.
The operation is not completed.
The template configration file, file_name, cannot be read. The file has been deleted or the product installation did not complete successfyully. Try reinstalling the product.
AWSITA274E
The template configuration file "file_name" cannot be read.
See message.
The operation is not completed.
The template configration file file_name cannot be read. Verify the file permissions and retry the operation.
AWSITA275E
The sendevent command was not executed because an error occurred allocating a memory pool. The error message is "error_message".
The command did not complete.
The operation is not completed.
If the memory allocation error is a temporary problem, try rerunning the command.
AWSITA276E
The sendevent command was not executed because an error occurred locking the file "file_name".
The command did not complete.
The operation is not completed.
The locked file error might be a temporary problem, try rerunning the command.
AWSITA277E
An internal error has occurred. An error occurred while creating the Event Integration Facility handle.
See message.
The operation is not completed.
If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.
AWSITA278E
An internal error has occurred. An error occurred while reading the value for "key_value" from the configuration file "onfiguration_file". Either the key is not present, or the configration file cannot be read
See message.
The operation is not completed.
Correct the problem and rerun the command
AWSITA279E
An internal error has occurred. The event was not sent and was instead cached in the file "cache_file".
The event was cached in the cache file cache_file.
The operation is not completed.
If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.
AWSITA282E
The event was filtered out and not sent.
AWSITA283E
An error occurred while sending the event. The error code is "error_code".
See message.
The operation is not completed.
If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.
AWSITA284E
The configuration file "file_name" does not exist.
See message.
The operation is not completed.
The configration file file_name cannot be read. The file has either been deleted or an error occurred when the product created it.
AWSITA285E
The configuration file "file_name" cannot be read.
See message.
The operation is not completed.
The configration file file_name cannot be read. Verify the permissions of the directory containing the file and retry the operation.
AWSITA286E
An internal error has occurred. An error occurred while initializing the environment to send the event.
See message.
The operation is not completed.
If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.
AWSITA288E
The JobManagerGW subagent cannot be created. The error is "error_message". The error code is "error_code".
The subagent cannot be created due to the reason detailed in the error message.
The agent is not started.
Check the error message and restart the agent.
AWSITA289E
The JobManagerGW subagent cannot be created. The error is "error_message". The error code is "error_code".
The subagent cannot be created due to the reason detailed in the error message.
The agent is not started.
Check the error message and restart the agent.
AWSITA291E
The main component of the gateway process cannot start because an error occurred creating a thread. The error message is "error_message".
>The thread that takes care of managing the gateway did not start.
The gateway did not start.
If the error is temporary, restart the agent.
AWSITA292E
The main component of the gateway process cannot start because an error occurred allocating a memory pool. The error message is "error_message".
>The thread that takes care of managing the gateway did not start.
The gateway did not start.
If the error is temporary, restart the agent.
AWSITA295E
Cannot create the memory pool to handle the connection. The error is "error_message". The error code is "error_code".
The subagent cannot be created due to the reason detailed in the error message.
The agent is not started.
Check the error message and restart the gateway.
AWSITA297E
The gateway failed to accept connections. The error is "error_message". The error code is "error_code".
The error message provides details.
The request is not served and the gateway will attempt a new connection in 10 seconds.
Check the error message and restart the gateway.
AWSITA298E
The gateway failed to create the thread needed to handle the request. The error is "error_message". The error code is "error_code".
The error message provides details.
The request is not served and the gateway will attempt a new connection in 10 seconds.
Check the error message.
AWSITA299E
The gateway failed to accept a connection.
The agent process returned a NULL while accepting a connection.
The request is not served and the agent will attempt a new connection in 10 seconds.
None.
AWSITA300E
Failed to create the memory pool of the command handler thread. The error is "error_message".
An error occurred while the command handler was allocating a memory pool.
The agent does not start.
Check the error message.
AWSITA301W
Failed to set the stack size of command handler thread pool. The error is "error_message".
An error occurred while setting the stack size of the command handler thread pool.
The default stack size is used.
Check the error message.
AWSITA302E
Failed to create the thread pool of the command handler. The error is "error_message".
An error occurred while the command handler was creating the thread pool.
The gateway does not start.
Check the error message.
AWSITA304E
The command is incorrect and cannot be processed.
There is an error in the communication protocol utilized.
The action is not performed.
If the user was trying to connect to the agent through the APIs, the developer should check the protocol utilized.
AWSITA305E
The http method returned the following error code: "error_code" and with the following error message "error_message".
There is an error in the http communication.
The action is not performed.
Check the error message and the error code.
AWSITA306E
Unable to get port information from URI "uri_value".
Port information is missing or not valid.
The attempt to connect to the URI failed.
Check that the port information is specified correctly in the URI.
AWSITA308E
The gateway got an error response while sending the resource information to the server. The error code is "error_code" and the error message is "error_message".
See message..
The resource information is not sent to the server. If this error persists, the computer system will result as unavailable.
None
AWSITA309E
The gateway can not send the resource information to "server_uri". The error is: "error_message".
The resource information is not sent to the server. If the error persists, the gateway is down.
Analyze the error and perform the correct action.
AWSITA310E
The gateway can not send the resource information to "server_uri" for a network connection problem. The error is: "error_message".
See message..
The resource information is not sent to the server. If the error persists, the gateway is down.
Analyze the error and perform the correct action.
AWSITA311E
The gateway can not send the resource information due to Basic Authentication conversion problem.
See message..
The resource information is not sent to the server. If the error persists, the gateway is down.
Analyze the error and perform the correct action.
AWSITA312E
Unable to get address information in payload.
Address information is missing or not valid.
The payload information is not updated.
Check that address information is specified correctly in the payload.
AWSITA313E
Unable to get resource EPR information in payload.
Resource EPR information is missing or not valid.
The payload information is not updated.
Check that Resource EPR information is specified correctly in the payload
AWSITA314E
Unable to get Resource Advisor URI information in payload.
Resource Advisor URI information is missing or not valid.
The payload information is not updated.
Check that Resource Advisor URI information is specified correctly in the payload
AWSITA315E
The gateway failed to create the thread needed to handle the request. The error is "error_message". The error code is "error_code".
The error message provides details.
The request is not served and the gateway will attempt a new connection in 10 seconds.
Check the error message.
AWSITA317E
Unable to get port information from URI "uri_value".
Port information is missing or not valid.
The attempt to connect to the URI failed.
Check that the port information is specified correctly in the URI.
AWSITA320E
The gateway was not able to contact the broker server at the address "server_uri" to obtain the list of actions to execute. The error is: "error_message".
The polling broker action queue information request not send to borker. If the error persists, the gateway is down.
Analyze the error and perform the correct action.
AWSITA321E
The gateway was not able to contact the broker server at the address "server_uri" to obtain the list of actions to execute for a network connection problem. The error is: "error_message".
See message..
The polling broker action queue information request not send to borker. If the error persists, the gateway is down.
Analyze the error and perform the correct action.
AWSITA322E
The gateway can not send the polling broker action queue information request due to Basic Authentication conversion problem.
See message..
The polling broker action queue information request is not sent to the broker. If the error persists, the gateway is down.
Analyze the error and perform the correct action.
AWSITA323E
The gateway got an error response while processing a submit request to "server_uri". The error is: "error_message".
See message..
The submit request not send to agent. If this error persists, the gateway is down
None
AWSITA324E
The gateway can not send the submit request to "server_uri" for a network connection problem. The error is: "error_message".
See message..
The submit request not send to agent. If the error persists, the gateway is down.
Analyze the error and perform the correct action.
AWSITA325E
The gateway got an error response while processing a Job log request to "server_uri". The error is: "error_message".
See message..
The Job log request not send to agent. If this error persists, the gateway is down
None
AWSITA326E
The gateway can not send the Job log request to "server_uri" for a network connection problem. The error is: "error_message".
See message..
The Job log request not send to agent. If the error persists, the gateway is down.
Analyze the error and perform the correct action.
AWSITA327E
Unable to get port information from URI "uri_value".
Port information is missing or not valid.
The attempt to connect to the URI failed.
Check that the port information is specified correctly in the URI.
AWSITA329E
The gateway got an error response while sending the result to "server_uri". The error is: "error_message".
See message..
The result not send to borler. If this error persists, the gateway is down
None
AWSITA330E
The gateway can not send the result to "server_uri" for a network connection problem. The error is: "error_message".
See message..
The result not send to broker. If the error persists, the gateway is down.
Analyze the error and perform the correct action.
AWSITA331E
Unable to get port information from URI "uri_value".
Port information is missing or not valid.
The attempt to connect to the URI failed.
Check that the port information is specified correctly in the URI.
AWSITA333E
The gateway got an error response while sending Job Status to agent. The error code is "error_code" and the error message is "error_message".
See message..
The Job Status request is not sent to the agent. If this error persists, the computer system will result as unavailable.
None
AWSITA334E
The gateway can not send the Job Status information to "server_uri". The error is: "error_message".
The Job status information is not sent to the server. If the error persists, the gateway is down.
Analyze the error and perform the correct action.
AWSITA335E
The gateway can not send the Job status information to "server_uri" for a network connection problem. The error is: "error_message".
See message..
The Job status information not send to agent. If the error persists, the gateway is down.
Analyze the error and perform the correct action.
AWSITA336E
The gateway can not send Job status information due to Basic Authentication conversion problem.
See message..
The Job status information is not sent to the agent. If the error persists, the gateway is down.
Analyze the error and perform the correct action.
AWSITA340E
The command "action" is not supported.
An unsupported command was sent by the broker server to the gateway.
The operation is not completed.
Upgrade the gateway to the latest release.
AWSITA342E
The PUT method was not executed on the uri "uri". The error is: "error_message".
See message..
The operation is not completed.
Retry the operation.
AWSITA343E
The kill of the job with the uri "uri" failed. The error is: "error_message".
See message..
The operation is not completed.
Retry the operation.
AWSITA345E
The executor command on the agent with the uri "uri" failed. The error is: "error_message".
See message..
The operation is not completed.
Retry the operation.
AWSITA347E
The executor command on the agent with the uri "uri" failed. The error is: "error_message".
See message..
The operation is not completed.
Retry the operation.
AWSITA349E
The component command on the agent with the uri "uri" failed. The error is: "error_message".
See message..
The operation is not completed.
Retry the operation.
AWSITA350E
Cannot able to decrypt gateway password.
The decrypting algorithm ran into an error.
The variable is not decrypted.
Use the param command to delete the variable and define it once again.
AWSITA351E
Cannot able to encrypt gateway password.
The encrypting algorithm ran into an error.
The variable is not encrypted.
Use the param command to delete the variable and define it once again.
AWSITA352E
Cannot able to update gateway password in file.
See message..
The password is not updated.
Analyze the error and perform the correct action.
AWSITA353E
Cannot able to retrive gateway password from file.
See message..
The password is not retrived.
Analyze the error and perform the correct action.
AWSITA354E
The gateway could not poll the broker action queue on "server_uri". The error code is: "error_code" and the error message is "error_message".
See message..
The operation is not completed..
Check the error message and the error code. The error code 500 usually means the broker server is down.
AWSITA355E
Error while preparing URI's of gateway.
See message..
The operation is not completed..
Check the error message and update gateway settings.
AWSITA356E
An error occurred setting the http proxy. The error is "error_message".
>See message.
The operation is not completed.
Check the error message.
AWSITA357E
The Event Driven Workload Automation file download failure from "event processor address". The error message is "error_message".
See message..
The Event Driven Workload Automation file download failure.
None
AWSITA358E
The Event Driven Workload Automation file download failure, retry requested from "event processor address". The error message is "error_message".
See message..
The Event Driven Workload Automation file download failure. Retry requested.
None
AWSITA360E
Unable to send Event Driven Workload Automation file download request on "event processor address" for a network connection problem. The error is: "error_message".
See message..
The Event Driven Workload Automation file download request not send. If the error persists, the Job Manager is down.
Analyze the error and perform the correct action.
AWSITA361E
An error occurred parsing the following JSON string "string".
See message..
The operation is not completed.
Retry the operation.
AWSITA362E
An error occurred processing the action. The error is "error_message".
>See message.
The operation is not completed.
Check the error message.
AWSITA364E
The reset command on the agent with the uri "uri" failed. The error is: "error_message".
See message..
The operation is not completed.
Retry the operation.
AWSITA366E
The POST method was not executed on the uri "uri". The error is: "error_message".
See message..
The operation is not completed.
Retry the operation.
AWSITA368E
Failed to download agent zip file from master with the following error: "error".
See message..
The operation is not completed.
Retry the operation.
AWSITA369E
Reached timeout waiting for running jobs: Agent centralized update aborted.
See message..
The operation is not completed.
Retry the operation.
AWSITA371E
Failed to unzip agent package file: "zipfile".
See message..
The operation is not completed.
Retry the operation.
AWSITA373E
Failed to send status to server. The errorcode is: "exitcode". Command output is "output".
See message..
The operation is not completed.
Retry the operation.
AWSITA374E
Centralized agent update DownloadDir path not valid: "path".
See message..
The operation is not completed.
Verify DownloadDir value in JobManager.ini.
AWSITA375E
An internal error has occurred. An error occurred while initializing the environment to receive the event.
See message.
The operation is not completed.
If you cannot resolve the problem, search the HCL Support database for a solution at https://hclpnpsupport.hcltech.com/csm.
AWSITA376E
The Event Driven Workload Automation component of the gateway process cannot start because an error occurred allocating a memory pool. The error message is "error_message".
The thread that manages the Event Driven Workload Automation component in the gateway process is not started.
The Event Driven Workload Automation component is not started in the gateway process.
Ensure that Event Driven Workload Automation component listening port is not already in use. Change the port value and restart the agent.
AWSITA377E
The required "space" megabytes of disk space are not available in the "directory" directory.
See message..
The operation is not completed.
Free the required disk space in the directory or select another directory with the necessary disk space available.
AWSITA378E
This agent was installed with a user that does not have the required permissions to impersonate the job user.
See message..
The job does not run.
AWSITA379E
Reached timeout waiting for update job to start: Agent centralized update aborted.
See message..
The operation is not completed.
Retry the operation.
AWSITA380E
Cannot retrieve the job with ID "job_id" because the agent job store is corrupted. The job instance is removed from the job table.
An error occurred while retrieving the job instance from the job store of the agent. The job instance is removed from the job table.
The job is not retrieved.
Check the error message.
AWSITA381E
The jobprop command has to be invoked by a job.
See message.
The operation is not completed.
Invoked the command in a job.
AWSITA383E
The post job execution script "script" for the job with id "job_id" cannot be started because an error occurred. The error message is "error_message".
See message..
The post job execution script is not started for that job.
Check the error message.
AWSITA384E
The post job execution script "script" cannot be found.
See message..
The post job execution script is not started for that job.
Check the existence of the post job execution script in the specified path.
AWSITA386E
Unable to send a reply to the message with ID "message_id" for the job with ID "job_id". The error is "error_message".
See message..
A reply to the message is not sent.
Check the error message.
AWSITA390E
Unable to read the message properties file for the job with ID "job_id". The error is "error_message".
See message..
The operation is not completed.
Check the error message.
AWSITA391E
The message with ID "message_id" for the job with ID "job_id" cannot be found.
See message..
The operation is not completed.
The message has already been answered.
AWSITA392E
The message properties file for the job with ID "job_id" contains invalid data.
See message..
The operation is not completed.
Check the file content.
AWSITA395E
Cannot invoke command for the job with ID "job_id" because it is not available in the agent job store.
An error occurred while retrieving the job instance in the job store of the agent. The job store is a persistent hashtable implemented on the file system.
This can happen if the job is not valid, if the job was already archived, or if the job store is incorrectly structured.
More detailed information about this error is available in the trace file on the agent.
None
If the job is not valid, this is more likely a script error. If the job was archived, no action is required.
AWSITA396E
Failed to unzip Workload Application Template export file: "wat_export_zip_file".
See message..
The operation is not completed.
Retry the operation.
AWSITA397E
Unable to create the Workload Application Template export file: "wat_export_zip_file".
See message..
The command does not run.
Verify that the path to the Workload Application Template file is correct and that you have the permissions required to create the file.
AWSITA399E
The connection with the server fails.
See message..
The command is not performed.
Check the connection parameters.
AWSITA400E
The submitted command cannot be performed. The error is: "error_msg"
See message..
The command is not completed.
Verify the connection parameters.
AWSITA401E
The server cannot find the requested service or the server configuration does not support providing the requested service.
The client was able to establish the communication with the server, but it could not find what was requested because this feature is not supported by the current server version or the request is not supported.
The command is not performed.
Check the connection parameters and verify you are connecting to a server which supports the request.
AWSITA403E
The filemonitor command cannot run because one or more input arguments are missing.
See message..
The command is not completed.
Run the command specifying the -u option to display the command usage, and then resubmit the command with the correct arguments.
AWSITA404E
Incorrect event. Supported events are fileCreated and fileModified.
See message.
The operation is not performed.
Retry the operation, providing a supported event type.
AWSITA405E
The job properties file cannot be updated if the file monitor is not invoked by a job.
See message.
The operation is not completed.
Invoked the filemonitor in a job.
AWSITA406E
The value specified for command argument "string" must be a valid non-negative integer.
See message..
The command is not completed.
Enter a valid non-negative integer for the specified argument.
AWSITA407E
The path specified for command argument "string" must be a valid path.
The specified path contains incorrect characters or the format is incorrect.
The command is not completed.
Enter a valid path for the specified argument.
AWSITA408E
The path specified for command argument "string" does not support wildcards.
See message..
The command is not completed.
Enter a valid path that does not contain wildcards.
AWSITA409E
The path specified for command argument "string" must point to a file.
See message..
The command is not completed.
Enter a path that point to a file.
AWSITA410E
The path specified for command argument "string" must point to a directory.
See message..
The command is not completed.
Enter a path that point to a directory.
AWSITA411E
The value specified for command argument repository_name must contain only a valid file name.
See message..
The operation is not performed.
Retry the operation, providing a valid repository name.
AWSITA413E
No folders were found matching the "search_path" search path.
See message..
The operation is not performed.
Retry the operation, providing a valid search path.
AWSITA414E
Unable to retrieve the files in "search_path" because the path does not exist.
See message..
The operation is not performed.
Retry the operation, providing a valid search path.
AWSITA415E
The timeout has expired.
See message..
The operation is not performed.
Retry the operation, increasing the timeout value.
AWSITA416E
You do not have read and/or write permission(s) on path "full_path_name".
See message..
The operation is not performed.
Retry the operation, providing a path on which you have read and write permissions.
AWSITA417E
Cannot create or operate on "output_file" file. The error is "error_message".
See message..
The operation is not performed.
Check the trace files for further information and retry the operation.
AWSITA418E
Cannot obtain exclusive access to the repository "repository_full_path_name".
See message..
The operation is not performed.
See the trace files for futher details on the error and retry the operation.