Access the workstation panel by entering option 1.1 from the main
menu. The Maintaining Work Station Descriptions menu is displayed.
Select option 2 (LIST). The LIST OF WORKSTATION DESCRIPTIONS panel,
shown in EQQWMLSL - List of workstation
descriptions, is displayed. Figure 1. EQQWMLSL - List of workstation
descriptions
EQQWMLSL ------------- LIST OF WORK STATION DESCRIPTIONS ---- ROW 1 TO 6
Command ===> SCROLL ===>
Enter the CREATE command above to create a workstation description or enter
any of the following row commands:
B - Browse, D - Delete, M - Modify, C - Copy.
Row Work station T R Last update
cmd name description user date
' CPU1 Main JES processor C A XRAYNER 97/01/30
' PAY1 payroll office G A XRAYNER 97/01/30
' PRT1 Printer pool G A XRAYNER 97/01/30
' SETP Used to prepare JCL G N XRAYNER 97/01/30
' STC1 Processor for started tasks C N XRAYNER 97/01/30
' WTO1 Messages for NetView G N XRAYNER 97/01/30
******************************* BOTTOM OF DATA **************************
Enter the CREATE command. The CREATING GENERAL INFORMATION ABOUT
A WORKSTATION panel, shown in EQQWCGEP
- Creating general information about a workstation,
is displayed. Figure 2. EQQWCGEP
- Creating general information about a workstation
EQQWCGEP ----- CREATING GENERAL INFORMATION ABOUT A WORK STATION --------
Command ===>
Enter the command R for resources or A for availability or O for end-to-end
options or D for Destinations above, or enter data below:
WORK STATION NAME ===> CPU1
DESCRIPTION ===> Main JES processor______________
WORK STATION TYPE ===> C G General, C Computer, P Printer
R Remote Engine
REPORTING ATTR ===> A A Automatic, S Manual start and completion
C Completion only, N Non reporting
PRINTOUT ROUTING ===> SYSPRINT The ddname of daily plan printout data set
SERVER USAGE ===> B Parallel server usage, B, N, P, or C
DESTINATION ===> ________ Name of destination
Options: allowed Y or N
SPLITTABLE ===> N JOB SETUP ===> N
STARTED TASK, STC ===> N WTO ===> N
AUTOMATION ===> N
WAIT ===> N Z-CENTRIC AGENT ===> N
VIRTUAL ===> N DYNAMIC ===> N
REMOTE ENGINE TYPE ===> Z z/OS or D Distributed
Defaults:
TRANSPORT TIME ===> 00.00 Time from previous work station HH.MM
DURATION ===> 00.05.00 Duration for a normal operation HH.MM.SS
If you are creating a virtual workstation, set
the VIRTUAL option to Y, then enter the D command to specify a list
of destinations associated to this workstation: Figure 3. EQQWMDES - Modifying virtual
workstation destination
EQQWMDES -------- MODIFYING VIRTUAL WORKSTATION DESTINATIONS - Row 1 to 1 of 1
Command ===> Scroll ===> CSR
Change data in the rows, and/or enter any of the following row commands:
I(nn) - Insert, R(nn),RR(nn) - Repeat, D(nn),DD - Delete, or,
A - Availability
Row Dest. Parallel Server Resource 1 Resource 1 Resource 2 Resource 2
cmd Name Usage Usage Name Usage Name
'''' VDEST2__ N N R1 N R2
'''' ******** N N R1 N R2
******************************* Bottom of data ********************************
To indicate the system where the controller and a local tracker
run, specify ******** in the destination name field.
Enter the A row command to specify the destination
availability and open time intervals: Figure 4. EQQWMAVV
- Availability of a workstation
EQQWMAVV -------------- AVAILABILITY OF A WORK STATION ------- Row 1 to 8 of 8
Command ===> Scroll ===> CSR
Work station : VWS1
Destination : VDEST2
Enter the ALL command above to get all open time intervals or
change data in the rows, and/or enter any of the following row commands:
I(nn) - Insert, R(nn),RR(nn) - Repeat, D(nn),DD - Delete
C - Close a day/date, S - Define open intervals for a day/date
Row Day of week or Status Description of day
cmd YY/MM/DD
'''' STANDARD______ DEFINED ________________________
'''' MONDAY________ STANDARD ________________________
'''' TUESDAY_______ STANDARD ________________________
'''' WEDNESDAY_____ STANDARD ________________________
'''' THURSDAY______ STANDARD ________________________
'''' FRIDAY________ STANDARD ________________________
'''' SATURDAY______ STANDARD ________________________
'''' SUNDAY________ STANDARD ________________________
******************************* Bottom of data ********************************
The same concepts apply as in the Specifying workstation availability, but instead
of a workstation, here, it is a destination that is defined as available
or not available.
To change the STANDARD open interval, and to create
other open intervals, and the associated number of resources, enter
the ALL command. The ALL OPEN TIME INTERVALS panel is displayed: Figure 5. EQQWMTAL
- All open time interval
EQQWMTAL ------------------ ALL OPEN TIME INTERVALS ---------- Row 1 to 1 of 1
Command ===> Scroll ===> CSR
Work station : VWS1
Destination : VDEST2
Change data in the rows, and/or enter any of the following row commands:
I(nn) - Insert, R(nn),RR(nn) - Repeat, D(nn),DD - Delete
Row Day of week or Open time interval Parallel Resources
cmd YY/MM/DD HH.MM - HH.MM servers R1 R2
'''' STANDARD______ 00.00 24.00 65535 99 99
******************************* Bottom of data ********************************
The same concepts apply as in Specifying workstation open intervals, but instead
of a workstation, here, it is a destination that is defined as available
or not available.
Note: You can specify a value up to 65535 in the
Parallel servers field.
If you are creating a dynamic workstation, set the DYNAMIC option to
Y, then enter the O command to specify the end-to-end options to be associated with the workstation.
For details, see Specifying dynamic workstations.