Installing in silent mode on Linux or AIX operating systems

Follow these steps to perform an automated installation of the HCL Traveler server.

Procedure

  1. Locate and extract the HCL Traveler installation application.
  2. Verify the settings in the installer.properties file, using Table 1. A pre filled sample is provided with the e-assembly.
    Note: installer.properties defaults the domino install location to /opt/hcl/. Previous versions of Domino defaulted to /opt/ibm/. Make sure to update the location.
  3. Verify the locale setting in the silentInstall script included in the e-assembly. Locale values are provided in Table 2.
  4. Launch the silentInstall script file included in the e-assembly: ./silentInstall
  5. Important: To determine if the install succeeded, you must review the installation logs. First, check DOMINO_DATA_DIRECTORY_1/IBM_TECHNICAL_SUPPORT/traveler/logs/TravelerInstall.log for any warnings or recoverable errors. If this file does not exist or the timestamp is old, then likely a unrecoverable error occurred. All unrecoverable errors are written to InstallError.log in the directory containing the installation application.
    Note: If an installation is a silent installation, then the uninstall operation is silent by default. A silent uninstallation does not require a properties file; it uninstalls all HCL Traveler files from all Domino® partitions in which they were installed.
    Table 1. Installer properties
    Property Choices Description

    ACCEPT_LICENSE

    true | false

    Set to true if you agree to the terms of the license agreement. If set to false, the application is not installed.

    DOMINO_PROGRAM_DIRECTORY

    Fully qualified path

    Path to the HCL Domino® program directory, where the server executable file exists.

    DOMINO_DATA_DIRECTORY_1

    Fully qualified path

    Path to the Domino® data directory, where names.nsf exists.

    Note: If you are using a partitioned Domino® installation, specify additional partitions by incrementing this parameter. For example, for a second partition, specify DOMINO_DATA_DIRECTORY_2=Fully-qualified path.

    DOMINO_NOTESINI_DIRECTORY_1

    Fully qualified path

    Path to the notes.ini file for this instance of the HCL Domino® server.

    Note: If you are using a partitioned Domino® installation, specify additional notes.ini files corresponding to data directories by incrementing this parameter. For example, for a second directory, specify DOMINO_NOTESINI_DIRECTORY_2=Fully-qualified path.

    INSTALLED_DOMINO_VERSION

    9.0.1 | 10.0.0 | 10.0.1 | 11.0.0 | 11.0.1 | 12.0.0 | 12.0.1

    This parameter should not be required. The installed Domino version should be auto detected. Set this parameter if for some reason the auto detection is not working as expected and you want to force the HCL Traveler server to use the defined Domino version during install.
    Note: For AIX, there is no 9.0.1 Version of HCL Traveler.
    Note: For Linux, a minimum of Domino 9.0.1 FP8 is required.
    BYPASS_DOMINO_VERSION_CHECK true | false Set to true to bypass the Domino Version lookup. This may be useful if any issues encountered when determining the Domino version, such as application hang or crash.
    Important: If setting this flag, also set INSTALLED_DOMINO_VERSION parameter above.

    LINUX_USER_NAME

    Linux or AIX username

    This property is the user name that the HCL Domino® server uses. It is required to set file permissions correctly during the installation process. Leave blank to automatically detect it during installation.

    Applies to both Linux and AIX.

    LINUX_GROUP_NAME

    Linux or AIX groupname

    This is the primary group of the Linux user that the Domino® Server runs under. It is required to set file permissions correctly during the installation process. Leave blank to auto detect this value during installation.

    Applies to both Linux and AIX.

    MULTI_INSTANCE_INSTALL true | false

    Default is false.

    On Linux and AIX, Domino® supports the concept of a multi-instance install. By default, HCL Traveler does not. Set this flag to true to allow installation to proceed normally if multiple Domino® servers are detected on the Linux or AIX OS. Note this option is only available in silent mode installation.

    NTS_SET_EXTERNAL_URL

    Fully qualified path

    The fully qualified URL that HCL Traveler clients use to connect to the HCL Traveler server. This URL is either the address of the server or a proxy server. If this URL is currently unknown, it should be configured on the HCL Traveler tab of the Domino® server document later.

    It is recommended that clients always communicate with the HCL Traveler Server over a secure connection. Consider specifying SSL communications by using a URL that begins with https://. Note that SSL must be setup and configured on the target server before clients can communicate with the HCL Traveler server.

    NTS_WEBSITE_HOME

    0 | 1

    When set to 1 during startup, HCL Traveler sets the user home page as the default website for the Domino® server. This is a useful starting place for users because it provides status information, links to client software, and user management options.

    If the HCL Traveler user home page is set as the default, it can be viewed by pointing any device browser to http://hostname. If the user home page is not set as the default, it can be viewed by pointing any device browser to http://hostname/servlet/traveler. This setting takes effect the first time HCL Traveler is started and can be changed manually at a later time.

    OVERRIDE_BACKREV

    true | false

    This optional property applies only to downgrade installations. If a newer version is already installed, false is the default value and the installation is not allowed. Set to true to override the default and downgrade the HCL Traveler server using silent installation.

    Table 2. Locale values
    Language Value
    Brazilian Portuguese pt_BR
    Catalan ca
    Czech cs
    Danish da
    Dutch nl
    English (default) en
    German de
    Finnish fi
    French fr
    Greek el
    Hungarian hu
    Italian it
    Japanese ja
    Korean ko
    Polish pl
    Portuguese pt
    Russian ru
    Simplified Chinese zh_CN
    Slovak sk
    Slovenian sl
    Spanish es
    Swedish sv
    Thai th
    Traditional Chinese zh_TW
    Turkish tr