Home
Resource Adapters
About the HCL Link Resource Adapters, and how to use them.
HL7 MLLP Adapter
The HL7 MLLP adapter uses the MLLP protocol over TCP/IP to pass data to and from HCL Link. The adapter has a listener interface that can detect the arrival of data on a socket and trigger a map to run. With the HL7 MLLP adapter, remote applications can pass data to HCL Link without using additional middleware software.
HL7 MLLP adapter command overview
This table summarizes the adapter commands, syntax, and whether you can use the command with data sources, data targets, or both. You can specify the commands on the adapter command line or through the adapter properties.
Port (-P) command
The -PORT command specifies the TCP/IP port number of the adapter. In server mode, the port number specifies the port to which remote clients connect. In client mode, the port number specifies the port on the remote host to which the adapter connects. The -PORT command is mutually exclusive with the -SERVICE command.

Resource Adapters
About the HCL Link Resource Adapters, and how to use them.
- Resource Adapters overview
  Resource adapters are used to retrieve and route data. They provide access to databases, files, messaging systems, enterprise applications and other data sources and targets.
- Apache HDFS Adapter
  The Apache HDFS Adapter allows the HCL Link to access the HDFS file system in Apache Hadoop environments.
- Apache ActiveMQ Adapter
  With the ActiveMQ Adapter, users can access any of the queues of the Active MQ Adapter to send and receive messages. Users can also create a new queue altogether for sending and receiving messages.
- Azure Service Bus Adapter
  The Azure Service Bus adapter supports accessing queue and topics on the Microsoft Azure Service Bus, a fully managed message broker service on the Microsoft Azure cloud.
- Azure SQL Adapter
  Microsoft Azure SQL Database is a general-purpose relational database, provided as a managed service. With it, you can create a highly available and high-performance data storage layer for the applications and solutions in Azure.
- Azure Blob Storage Adapter
  The Azure Blob Storage adapter provides support to perform read and write operations on the blobs in the block storage managed by the Azure Blob Storage cloud service
- Apache Kafka Adapter
  With the Apache Kafka adapter, maps can connect to a Kafka cluster to consume and produce messages.
- Amazon S3 Adapter
  This documentation discusses the Amazon S3 Adapter.
- Amazon SNS Adapter
  With the Amazon SNS adapter, a user can access the Amazon Simple Notification Services. This adapter connects to the Simple Notification Services (SNS) topics, using AWS keys. The adapter can fetch and send notifications from and to those AWS SNS topics, to which the user has subscribed.
- Batch File and Shell Script Adapters
  The Batch File adapter processes a (Windows™) batch file as the data source of an input map card or the data target of an output map card. The Shell Script adapter processes a (UNIX™) shell script as the data source of an input map card or the data target of an output map card.
- Cipher Adapter
  The Cipher adapter encrypts and decrypts data by using the Advanced Encryption Standard (AES) established by the U.S. National Institute of Standards and Technology (NIST). A single cryptographic key enciphers (encrypts) and deciphers data. The cryptographic key is stored in a master key file (MKF) in an AES-based encrypted format. As long as the MKF is not compromised or lost, the enciphered data is cryptographically secure.
- Email Adapters
  An email adapter automatically receives email messages as sources of a map or sends email messages as targets of a map.
- FTP Adapter
  Use the File Transfer Protocol (FTP) Adapter to transport data. When source data arrives at its target, it often must be transformed into a different format for a receiving application to use it successfully.
- Excel Adapter
  The Excel Adapter reads data from and maps data to a sheet in a Microsoft Excel workbook. In Design Studio, use the Excel importer (File > Import > Excel) to create a type tree based on a specified worksheet in the Excel workbook.
- Google Cloud Storage Adapter
  The Google Cloud Storage Adapter provides access to Google Cloud Storage buckets and objects in the Google Cloud Platform.
- Google Pub / Sub Adapter
  The Google Cloud Pub/Sub adapter provides access to Google Cloud Pub/Sub topics and subscriptions in the Google Cloud Platform.
- GZIP/ZLIB Adapter
  Use the GZIP/ZLIB Adapter to retrieve data in file or memory formats and export data for GZIP, ZLIB and Plain file formats.
- HTTP Adapter
  The Hypertext Transfer Protocol (HTTP) Adapter provides support for Proxy servers and Secure Socket Layer (SSL) protocol, which is required to process HTTPS (secure) URLs.
- IBM MQ Adapter
  The IBM® MQ adapter works with IBM MQ to accomplish the task of maintaining data compatibility, handling all kinds of data transformations from the simplest to the most complex.
- Java Class Adapter
  Use the Java Class Adapter to instantiate a Java™ object and to invoke a sequence of methods on the object.
- HL7 MLLP Adapter
  The HL7 MLLP adapter uses the MLLP protocol over TCP/IP to pass data to and from HCL Link. The adapter has a listener interface that can detect the arrival of data on a socket and trigger a map to run. With the HL7 MLLP adapter, remote applications can pass data to HCL Link without using additional middleware software.
  - System requirements
    Install a Command Server, or other HCL Link runtime component on the computer where the adapter is to be installed for runtime purposes.
  - How to use the HL7 MLLP adapter in a map
    You can use the HL7 MLLP adapter on input cards and output cards, and in GET and PUT map rules.
  - Conversation support
  - HL7 MLLP adapter command overview
    This table summarizes the adapter commands, syntax, and whether you can use the command with data sources, data targets, or both. You can specify the commands on the adapter command line or through the adapter properties.
    - Command alias
      Use the MLLP adapter alias to use the HL7 MLLP adapter on input and output cards and in GET and PUT map rules.
    - Client connection (-CCON) command
      The client connection command specifies whether a client connection is shared between map instances or exclusively associated with a single map instance.
    - Host (-H) command
      The -HOST command specifies the host name or TCP/IP address of the remote host. The -HOST command is optional. If you omit it, the adapter uses the name of the local computer as the remote host name.
    - Listen (-LSN) command
      The -LSN command specifies the amount of time, in seconds, that the adapter waits for a message to arrive. This command is optional. If you omit it, the adapter waits for an infinite amount of time.
    - Port (-P) command
      The -PORT command specifies the TCP/IP port number of the adapter. In server mode, the port number specifies the port to which remote clients connect. In client mode, the port number specifies the port on the remote host to which the adapter connects. The -PORT command is mutually exclusive with the -SERVICE command.
    - Quantity (-QTY) command
      The -QTY command specifies the number of messages that the adapter is to retrieve. In burst mode, the total number of messages retrieved by the adapter does not exceed the number specified by the -QTY command, although a single burst might return fewer messages. The -QTY command is optional. If you omit it, the default number of messages is 1.
    - Service (-S) command
      The -Service command specifies the service name that is used to map a TCP/IP port number. The -Service command is mutually exclusive with the -PORT command.
    - Trace (-T) command
      The -TRACE command produces a log file of HL7 MLLP adapter activity.
- JAXB Adapter
  The JAXB adapter converts Java™ objects to XML and converts XML to Java objects. With the JAXB adapter, you can build Java objects that can be represented with XML, parse the objects, and use them in maps. The JAXB adapter supports all JAXB properties for marshalling and unmarshalling an XML document.
- JDBC Adapter
  Use the Java Database Connectivity (JDBC) adapter to query or update a database through the appropriate JDBC driver for the database.
- JMS Adapter
  Use the Java™ Message Service (JMS) Adapter as a client to any JMS-compliant messaging system provider.
- JNDI Adapter
  Use the Java™ Naming and Directory Interface (JNDI) Adapter to enable maps to look up, add, modify and delete entries in external directories, and retrieve the results that these operations return so that they can be reused in a map.
- MongoDB Adapter
  Use the MongoDB adapter to create, read, update, and delete single or multiple JavaScript Object Notation (JSON) documents in a MongoDB database.
- OData Adapter
  The OData (Open Data Protocol) adapter provides support for performing read and write operations on data sources that expose OData interface. OData adapter is an ISO/IEC approved, OASIS standard that defines a set of best practices for building and consuming RESTful APIs.
- OpenPGP Adapter
  Use the OpenPGP Adapter to exchange information with the GnuPG application.
- PDF Adapter
  The PDF Adapter works with Acrobat forms and templates to generate a PDF document or extract data from all or part of an input PDF document.
- REST Adapter
  REST adapter is a solution where Link can readily call any Web/REST API and provide easy mapping to and from the APIs.
- SAP BAPI Adapter
  The SAP BAPI contains the BAPIs which internally invokes Remote Function Calls (RFCs) which is necessary to pass inbound and outbound data to and from SAP R/3.
- Salesforce Adapter
  Salesforce Adapter provides support to access Salesforce REST API resource. It is useful for abstracting a piece of information or an action.
- ServiceNow Adapter
  The ServiceNow adapter provides support for accessing ServiceNow REST API resources.
- SFTP Adapter
  With the Secure File Transfer Protocol (SFTP) adapter, you can send and fetch files securely to and from an SFTP server.
- SOAP Adapter
  SOAP defines the XML-based message format that applications use to communicate and inter-operate with each other over the Web.
- Socket Adapter
  The Socket Adapter provides a means of passing data to and from HCL Link through standard TCP/IP sockets.
- Archive (Tar) Adapter
  This documentation introduces the Archive (Tar) adapter. You can use the adapter with a Command Server, Software Development Kit, or map in a map rule.
- Archive (Zip) Adapter
  Use the Archive (Zip) Adapter with a Command Server, Software Development Kit, or map in a map rule.

Port (-P) command

The -PORT command specifies the TCP/IP port number of the adapter. In server mode, the port number specifies the port to which remote clients connect. In client mode, the port number specifies the port on the remote host to which the adapter connects. The -PORT command is mutually exclusive with the -SERVICE command.

-PORT command syntax

{ -P | -PORT } port_number

port_number: The TCP/IP port number.