Portal Scripting Interface and project support | HCL Digital Experience

With the Portal Scripting Interface, you can create Jacl or Jython scripts to automate the management of projects.

Using the Project bean with the Portal Scripting Interface, you can perform the following actions on projects:

List all available projects
Create and delete projects
Set an active project
Retrieve information about a specific project
Retrieve locale-specific attributes for projects
Submit a project for review
Withdraw a project from review.
Approve projects
Decline a project
Approve all documents of a project, that is all Web Content Manager items that are parts of a workflow
Decline all documents of a project, that is all Web Content Manager items that are parts of a workflow
Publish projects

To run commands with the Project bean, you can use the Portal bean to set a project as the context for subsequent commands.

List projects

To retrieve a list of projects, use the listall method. This method returns the names of the projects.

Jacl syntax: $Project listall
Jython syntax: Project.listall()

Jacl example:

wsadmin>$Project listall
'"TestProject1" "TestProject2"'

Jython example:

wsadmin>Project.listall()
'"TestProject1" "TestProject2"'

Create projects

To create a project, use the create method.

Jacl syntax: $Project create "project_name"
Jython syntax: Project.create("project_name")

Jacl example:

wsadmin>$Project create "TestProject1"
TestProject1

Jython example:

Project.create("TestProject1")
'TestProject1'

Note: If you create a project with the Portal Scripting Interface, the project is not listed with the recent projects in the project menu.

Delete projects

To delete a project, use the delete method.

Jacl syntax: $Project delete "project_name"
Jython syntax: Project.delete("project_name")

Jacl example:

wsadmin>$Project delete "TestProject1"

Jython example:

wsadmin>Project.delete("TestProject1")

Set active project

For commands that you want to run within a project, use the setproject method of the Portal bean to specify the project. When invoking the setproject method, you identify the active project with the name of the project. If you invoke the setproject method without specifying a project name, the active project is cleared. When you set the project during a session, the project is active immediately.

To set the active project, you must establish a user session with the portal by using the login command of the Portal bean.

Jacl syntax: $Project setproject "project_name"
Jython syntax: Portal.setproject("project_name")

Jacl example:

wsadmin>$Portal setproject "TestProject1"

Jython example:

wsadmin>Portal.setproject("TestProject1")

Retrieve project details

Retrieve project details with the details method. This method returns the following information about the project:

Universally Unique Identifier (UUID)
State
Name
Title
Approvers
Outstanding approvals
Approval mode, that is whether all approvers need to approve or only one approver needs to approve
History, that is which actions have been performed on the project before.

Syntax:

Jacl syntax: $Project details "project_name"
Jython syntax: Project.details("project_name")

Jacl example:

wsadmin>$Project details "TestProject2"
uuid                 : 47c7f3bd-b004-4b94-a6b5-397272d69eb7
state                : ACTIVE
name                 : TestProject2
title                : TestProject2
approvers            : wpsadmins
outstanding approvals: wpsadmins
approval mode        : all
history              : 9/24/13 1:02 PM: Document created by wpsadmin
                       9/24/13 1:06 PM: Submitted for review by wpsadmin
                       9/24/13 1:06 PM: Project state changed to Review
                       9/24/13 6:34 PM: Rejected by wpsadmin
                       9/24/13 6:34 PM: Project state changed to Rejected
                       9/24/13 6:34 PM: Project state changed to Active
                       9/24/13 6:35 PM: Submitted for review by wpsadmin
                       9/24/13 6:35 PM: Project state changed to Review
                       9/24/13 6:35 PM: Rejected by wpsadmin
                       9/24/13 6:35 PM: Rework project with more detail.
                       9/24/13 6:35 PM: Project state changed to Rejected
                       9/24/13 6:35 PM: Project state changed to Active
items:
  testpagep2 (draft / new / publish pending)

Jython example:

wsadmin>print Project.details("TestProject2")
uuid                 : 47c7f3bd-b004-4b94-a6b5-397272d69eb7
state                : ACTIVE
name                 : TestProject2
title                : TestProject2
approvers            : wpsadmins
outstanding approvals: wpsadmins
approval mode        : all
history              : 9/24/13 1:02 PM: Document created by wpsadmin
                       9/24/13 1:06 PM: Submitted for review by wpsadmin
                       9/24/13 1:06 PM: Project state changed to Review
                       9/24/13 6:34 PM: Rejected by wpsadmin
                       9/24/13 6:34 PM: Project state changed to Rejected
                       9/24/13 6:34 PM: Project state changed to Active
                       9/24/13 6:35 PM: Submitted for review by wpsadmin
                       9/24/13 6:35 PM: Project state changed to Review
                       9/24/13 6:35 PM: Rejected by wpsadmin
                       9/24/13 6:35 PM: Rework project with more detail.
                       9/24/13 6:35 PM: Project state changed to Rejected
                       9/24/13 6:35 PM: Project state changed to Active
items:
  testpagep2 (draft / new / publish pending)

Retrieve translated attributes

If any project attributes are translated, such as the title or description, you can retrieve those attributes with the nlsget method. Specify the attribute with one of the following parameters:

Title: title or t
Description: description, descr, or d

Syntax:

Jacl syntax: $Project nlsget "project_name" attribute_parameter [locale]
Jython syntax: Project.nlsget("project_name","attribute_parameter"[,"locale"])

Jacl example:

wsadmin>$Project nlsget "TestProject1" descr en
This is the description for TestProject1.

Jython example:

wsadmin>print Project.nlsget("TestProject1", "descr", "en")
This is the description for TestProject1.

If you do not specify a value for the locale parameter, the currently selected locale is used.

Submit a project for review

To submit a project for review, use the submitforreview method. The project needs to be in active state, and all contained documents need to be in publish, pending, or deleted state. When you submit a project for review, the project moves into the review state.

Jacl syntax: $Project submitforreview "project_name"
Jython syntax: Project.submitforreview("project_name")

Jacl example:

wsadmin>$Project submitforreview TestProject

wsadmin>$Project details TestProject
uuid                 : 035c4488-973f-44a4-aa8e-92b9f36e2412
state                : REVIEW
name                 : TestProject
title                : TestProject
approvers            : wpsadmins
outstanding approvals: wpsadmins
approval mode        : single
history              : 10/16/13 6:23 PM: Document created by wpsadmin
                       10/16/13 6:26 PM: Submitted for review by wpsadmin
                       10/16/13 6:26 PM: Project state changed to Review
items:
  testpage (draft / new / publish pending)

Jython example:

wsadmin>Project.submitforreview("TestProject")

wsadmin>print Project.details("TestProject")
uuid                 : 035c4488-973f-44a4-aa8e-92b9f36e2412
state                : REVIEW
name                 : TestProject
title                : TestProject
approvers            : wpsadmins
outstanding approvals: wpsadmins
approval mode        : single
history              : 10/16/13 6:23 PM: Document created by wpsadmin
                       10/16/13 6:26 PM: Submitted for review by wpsadmin
                       10/16/13 6:26 PM: Project state changed to Review
items:
  testpage (draft / new / publish pending)

Withdraw a project from review

To withdraw a project from review, use the withdrawfromreview method. The project needs to be in review state. When you withdraw a project from review, the project moves into the active state.

Jacl syntax: $Project withdrawfromreview "project_name"
Jython syntax: Project.withdrawfromreview("project_name")

Jacl example:

wsadmin>$Project withdrawfromreview TestProject

wsadmin>$Project details TestProject
uuid                 : 035c4488-973f-44a4-aa8e-92b9f36e2412
state                : ACTIVE
name                 : TestProject
title                : TestProject
approvers            : wpsadmins
outstanding approvals: wpsadmins
approval mode        : single
history              : 10/16/13 6:23 PM: Document created by wpsadmin
                       10/16/13 6:26 PM: Submitted for review by wpsadmin
                       10/16/13 6:26 PM: Project state changed to Review
                       10/16/13 6:26 PM: Rejected by wpsadmin
                       10/16/13 6:26 PM: needs rework
                       10/16/13 6:26 PM: Project state changed to Rejected
                       10/16/13 6:26 PM: Project state changed to Active
                       10/16/13 6:27 PM: Submitted for review by wpsadmin
                       10/16/13 6:27 PM: Project state changed to Review
                       10/16/13 6:28 PM: Withdrawn from review by wpsadmin
                       10/16/13 6:28 PM: Project state changed to Active
items:
  testpage (draft / new / publish pending)

Jython example:

wsadmin>Project.withdrawfromreview("TestProject")

wsadmin>print Project.details("TestProject")
uuid                 : 035c4488-973f-44a4-aa8e-92b9f36e2412
state                : ACTIVE
name                 : TestProject
title                : TestProject
approvers            : wpsadmins
outstanding approvals: wpsadmins
approval mode        : single
history              : 10/16/13 6:23 PM: Document created by wpsadmin
                       10/16/13 6:26 PM: Submitted for review by wpsadmin
                       10/16/13 6:26 PM: Project state changed to Review
                       10/16/13 6:26 PM: Rejected by wpsadmin
                       10/16/13 6:26 PM: needs rework
                       10/16/13 6:26 PM: Project state changed to Rejected
                       10/16/13 6:26 PM: Project state changed to Active
                       10/16/13 6:27 PM: Submitted for review by wpsadmin
                       10/16/13 6:27 PM: Project state changed to Review
                       10/16/13 6:28 PM: Withdrawn from review by wpsadmin
                       10/16/13 6:28 PM: Project state changed to Active
items:
  testpage (draft / new / publish pending)

Approve projects

To approve the drafts in a project, use the approve method. Additional to the project, you can add a comment as a second parameter. If the project setup requires a comment, the comment is mandatory. If not, the comment is optional.

The command approves only the project. The drafts in the project need to be approved separately, for example by using the approvedocuments method. Before you can approve a project, all of its documents must be in publish, pending, or deleted state.

Jacl syntax:

$Project approve "project_name"
$Project approve "project_name" "comment"

Jython syntax:

Project.approve("project_name")
Project.approve("project_name", "comment")

Jacl example:

wsadmin>$Project approve TestProject "ok"

wsadmin>$Project details TestProject
uuid                 : 035c4488-973f-44a4-aa8e-92b9f36e2412
state                : PENDING
name                 : TestProject
title                : TestProject
approvers            : wpsadmins
outstanding approvals: 
approval mode        : single
history              : 10/16/13 6:23 PM: Document created by wpsadmin
                       10/16/13 6:26 PM: Submitted for review by wpsadmin
                       10/16/13 6:26 PM: Project state changed to Review
                       10/16/13 6:26 PM: Rejected by wpsadmin
                       10/16/13 6:26 PM: needs rework
                       10/16/13 6:26 PM: Project state changed to Rejected
                       10/16/13 6:26 PM: Project state changed to Active
                       10/16/13 6:27 PM: Submitted for review by wpsadmin
                       10/16/13 6:27 PM: Project state changed to Review
                       10/16/13 6:28 PM: Withdrawn from review by wpsadmin
                       10/16/13 6:28 PM: Project state changed to Active
                       10/16/13 6:28 PM: Submitted for review by wpsadmin
                       10/16/13 6:28 PM: Project state changed to Review
                       10/16/13 6:28 PM: Approved by wpsadmin
                       10/16/13 6:28 PM: ok
                       10/16/13 6:28 PM: Project state changed to Pending
items:
  testpage (draft / new / publish pending)

Jython example:

wsadmin>Project.approve("TestProject1")
wsadmin>print Project.details("TestProject1")
uuid                 : 035c4488-973f-44a4-aa8e-92b9f36e2412
state                : PENDING
name                 : TestProject
title                : TestProject
approvers            : wpsadmins
outstanding approvals: 
approval mode        : single
history              : 10/16/13 6:23 PM: Document created by wpsadmin
                       10/16/13 6:26 PM: Submitted for review by wpsadmin
                       10/16/13 6:26 PM: Project state changed to Review
                       10/16/13 6:26 PM: Rejected by wpsadmin
                       10/16/13 6:26 PM: needs rework
                       10/16/13 6:26 PM: Project state changed to Rejected
                       10/16/13 6:26 PM: Project state changed to Active
                       10/16/13 6:27 PM: Submitted for review by wpsadmin
                       10/16/13 6:27 PM: Project state changed to Review
                       10/16/13 6:28 PM: Withdrawn from review by wpsadmin
                       10/16/13 6:28 PM: Project state changed to Active
                       10/16/13 6:28 PM: Submitted for review by wpsadmin
                       10/16/13 6:28 PM: Project state changed to Review
                       10/16/13 6:28 PM: Approved by wpsadmin
                       10/16/13 6:28 PM: ok
                       10/16/13 6:28 PM: Project state changed to Pending
items:
  testpage (draft / new / publish pending)

Decline projects

To decline the drafts in a project, use the decline method. Additional to the project, you can add a comment as a second parameter. If the project setup requires a comment, the comment is mandatory. If not, the comment is optional. The command only declines the project. The drafts in the project remain in their current state. For a project to be declined, the project needs to be in review state.

Jacl syntax:

$Project decline "project_name"
$Project decline "project_name" "comment"

Jython syntax:

Project.decline("project_name")
Project.decline("project_name", "comment")

Jacl example:

wsadmin>$Project decline TestProject "needs rework"

wsadmin>$Project details TestProject
uuid                 : 035c4488-973f-44a4-aa8e-92b9f36e2412
state                : ACTIVE
name                 : TestProject
title                : TestProject
approvers            : wpsadmins
outstanding approvals: wpsadmins
approval mode        : single
history              : 10/16/13 6:23 PM: Document created by wpsadmin
                       10/16/13 6:26 PM: Submitted for review by wpsadmin
                       10/16/13 6:26 PM: Project state changed to Review
                       10/16/13 6:26 PM: Rejected by wpsadmin
                       10/16/13 6:26 PM: needs rework
                       10/16/13 6:26 PM: Project state changed to Rejected
                       10/16/13 6:26 PM: Project state changed to Active
items:
  testpage (draft / new / publish pending)

Jython example:

wsadmin>Project.decline("TestProject1")
wsadmin>print Project.details("TestProject1")
uuid                 : 035c4488-973f-44a4-aa8e-92b9f36e2412
state                : ACTIVE
name                 : TestProject
title                : TestProject
approvers            : wpsadmins
outstanding approvals: wpsadmins
approval mode        : single
history              : 10/16/13 6:23 PM: Document created by wpsadmin
                       10/16/13 6:26 PM: Submitted for review by wpsadmin
                       10/16/13 6:26 PM: Project state changed to Review
                       10/16/13 6:26 PM: Rejected by wpsadmin
                       10/16/13 6:26 PM: needs rework
                       10/16/13 6:26 PM: Project state changed to Rejected
                       10/16/13 6:26 PM: Project state changed to Active
items:
  testpage (draft / new / publish pending)

Approve all documents of a project

To approve all documents of a project, use the approvedocuments method. It approves all Web Content Manager items that are parts of a workflow.

Jacl syntax: $Project approvedocuments project_name
Jython syntax: Project.approvedocuments("project_name")

Jacl example:

wsadmin>$Project approvedocuments TestProject

wsadmin>$Project details TestProject
uuid                 : 5dffe3e4-59d1-4abf-8697-3e62a29a0cbf
state                : PENDING
name                 : TestProject
title                : TestProject
approvers            : 
outstanding approvals: 
approval mode        : single
history              : 10/16/13 6:14 PM: Document created by wpsadmin
                       10/16/13 6:16 PM: Project state changed to Pending
items:
  testpage (draft / new / publish pending)

Jython example:

wsadmin>Project.approvedocuments("TestProject")

wsadmin>Project.details("TestProject")
uuid                 : 5dffe3e4-59d1-4abf-8697-3e62a29a0cbf
state                : PENDING
name                 : TestProject
title                : TestProject
approvers            : 
outstanding approvals: 
approval mode        : single
history              : 10/16/13 6:14 PM: Document created by wpsadmin
                       10/16/13 6:16 PM: Project state changed to Pending
items:
  testpage (draft / new / publish pending)

Decline all documents of a project

To decline all documents of a project, use the declinedocuments method. This method declines all Web Content Manager items that are parts of a workflow.

Jacl syntax: $Project declinedocuments project_name
Jython syntax: Project.declinedocuments("project_name")

Jacl example:

wsadmin>$Project declinedocuments TestProject
wsadmin>$Project details TestProject
uuid                 : 5dffe3e4-59d1-4abf-8697-3e62a29a0cbf
state                : ACTIVE
name                 : TestProject
title                : TestProject
approvers            : 
outstanding approvals: 
approval mode        : single
history              : 10/16/13 6:14 PM: Document created by wpsadmin
                       10/16/13 6:16 PM: Project state changed to Pending
                       10/16/13 6:18 PM: Project state changed to Active
items:
  testpage (draft / new)

Jython example:

wsadmin>$Project.declinedocuments("TestProject")
wsadmin>$Project.details("TestProject")
uuid                 : 5dffe3e4-59d1-4abf-8697-3e62a29a0cbf
state                : ACTIVE
name                 : TestProject
title                : TestProject
approvers            : 
outstanding approvals: 
approval mode        : single
history              : 10/16/13 6:14 PM: Document created by wpsadmin
                       10/16/13 6:16 PM: Project state changed to Pending
                       10/16/13 6:18 PM: Project state changed to Active
items:
  testpage (draft / new)

Publish projects

To publish a project, use the publish method. Before you can publish a project, all items in the project must be approved and the project needs to be in publish pending state.

Jacl syntax: $Project publish "project_name"
Jython syntax: Project.publish("project_name")

Jacl example:

wsadmin>$Project publish TestProject

wsadmin>$Project details TestProject
uuid                 : 035c4488-973f-44a4-aa8e-92b9f36e2412
state                : PUBLISHED
name                 : TestProject
title                : TestProject
approvers            : wpsadmins
outstanding approvals: 
approval mode        : single
history              : 10/16/13 6:23 PM: Document created by wpsadmin
                       10/16/13 6:26 PM: Submitted for review by wpsadmin
                       10/16/13 6:26 PM: Project state changed to Review
                       10/16/13 6:26 PM: Rejected by wpsadmin
                       10/16/13 6:26 PM: needs rework
                       10/16/13 6:26 PM: Project state changed to Rejected
                       10/16/13 6:26 PM: Project state changed to Active
                       10/16/13 6:27 PM: Submitted for review by wpsadmin
                       10/16/13 6:27 PM: Project state changed to Review
                       10/16/13 6:28 PM: Withdrawn from review by wpsadmin
                       10/16/13 6:28 PM: Project state changed to Active
                       10/16/13 6:28 PM: Submitted for review by wpsadmin
                       10/16/13 6:28 PM: Project state changed to Review
                       10/16/13 6:28 PM: Approved by wpsadmin
                       10/16/13 6:28 PM: ok
                       10/16/13 6:28 PM: Project state changed to Pending
                       10/16/13 6:29 PM: Project state changed to Publishing
                       10/16/13 6:29 PM: Project state changed to Published
items:
  testpage (published)

Jython example:

wsadmin>Project.publish("TestProject1")
wsadmin>print Project.details("TestProject1")
uuid                 : 035c4488-973f-44a4-aa8e-92b9f36e2412
state                : PUBLISHED
name                 : TestProject
title                : TestProject
approvers            : wpsadmins
outstanding approvals: 
approval mode        : single
history              : 10/16/13 6:23 PM: Document created by wpsadmin
                       10/16/13 6:26 PM: Submitted for review by wpsadmin
                       10/16/13 6:26 PM: Project state changed to Review
                       10/16/13 6:26 PM: Rejected by wpsadmin
                       10/16/13 6:26 PM: needs rework
                       10/16/13 6:26 PM: Project state changed to Rejected
                       10/16/13 6:26 PM: Project state changed to Active
                       10/16/13 6:27 PM: Submitted for review by wpsadmin
                       10/16/13 6:27 PM: Project state changed to Review
                       10/16/13 6:28 PM: Withdrawn from review by wpsadmin
                       10/16/13 6:28 PM: Project state changed to Active
                       10/16/13 6:28 PM: Submitted for review by wpsadmin
                       10/16/13 6:28 PM: Project state changed to Review
                       10/16/13 6:28 PM: Approved by wpsadmin
                       10/16/13 6:28 PM: ok
                       10/16/13 6:28 PM: Project state changed to Pending
                       10/16/13 6:29 PM: Project state changed to Publishing
                       10/16/13 6:29 PM: Project state changed to Published
items:
  testpage (published)

Examples

These examples demonstrate a typical command sequence to create a page within a specific project. Each example script performs the following operations:

Establishes a user session.
Creates a project (myproject).
Retrieves the details for the myproject project.
Sets the active project to the myproject project.
Locates the Home page in the portal.
Creates the testpage1 page as a child page of the Home page. This operation takes place within the context of the active project.
Clears the active project.
Terminates the user session.

Jacl example:

$Portal login
set myproject [$Project create "My new project"
$Project details $myproject
$Portal setproject $myproject
$Content find any un ibm.portal.Home select
$Content create page testpage1 html shared public
$Portal setproject
$Portal logout

Jython example:

Portal.login()
myproject = Project.create("My new project")
Project.details(myproject)
Portal.setproject(myproject)
Content.find("any", "un", "ibm.portal.Home", "select")
Content.create("page","testpage1","html", "shared", "public")
Portal.setproject()
Portal.logout()