Home
HCL Digital Experience 9.5 [Legacy content]
Configuring
Run the following tasks after you install and deploy HCL Digital Experience. They address tasks that are typically run one time and have a global effect. Some configuration changes are made more frequently or do not have a global effect. These tasks are addressed in the Administering section.
Document Conversion Services
Document Conversion Services are used when you work with HCL Web Content Manager authoring, previewing, and search.
Configure Document Conversion Services
Learn how to configure the Document Conversion Services in HCL Portal. A knowledge of these prerequisites steps can assist you in preventing, identifying, and correcting problems that are related to Document Conversion Services.
Configuring Document Conversion Services for IBM i
Configure the Document Conversion Services to perform document conversions on IBM i systems. You need to complete the following steps whenever you start the Portal server from a new terminal window.

HCL Digital Experience 9.5 [Legacy content]
- Overview
  HCL Digital Experience provides a single access point to web content and applications, while it delivers differentiated, personalized experiences for each user across multiple touchpoints, such as web, mobile, hybrid mobile/web applications, and more.
- Supported migration paths
  Migration is supported between equivalent HCL Digital Experience offerings.
- Supported installation and upgrade paths
  Installation and upgrade is supported between equivalent HCL Digital Experience offerings.
- Getting the software
  New and existing users need to register at the HCL Software License Portal and download their entitled HCL Digital Experience package(s).
- Creating your website
  Review the following topics to understand how to create your website using the latest HCL Digital Experience.
- Installing HCL Digital Experience
  Review the planning information on HCL Digital Experience, then select your operating system and installation pattern that most reflects your business needs.
- Configuring
  Run the following tasks after you install and deploy HCL Digital Experience. They address tasks that are typically run one time and have a global effect. Some configuration changes are made more frequently or do not have a global effect. These tasks are addressed in the Administering section.
  - Configuration Wizard
    Use the Configuration Wizard to set up stand-alone servers and new deployments, create clusters, migrate and update to new versions, and add new capabilities to existing deployments.
  - Setting up a stand-alone server
    Use the Configuration Wizard to set up a stand-alone server. A stand-alone server is useful for different environments, such as a content authoring environment, test environment, and more.
  - Setting up a cluster
    Use the Configuration Wizard to set up either a dynamic or static horizontal cluster.
  - Tune your environment
    HCL Digital Experience is not tuned for a production environment by default. Complete the steps in the Performance Tuning Guide to optimize performance.
  - Web servers
    HCL Digital Experience uses the internal HTTP transport within IBM WebSphere Application Server to handle requests. However, because WebSphere Application Server also supports the use of an external web server, you can access HCL Portal from your web server. You can use a local web server on the same server as HCL Portal or you can use a remote web server on a different server. A remote web server is typical for a production environment or other high-traffic configuration and is also typically placed in DMZ outside a firewall to protect portal ports.
  - HCL Portal
    First, finish your HCL Digital Experience deployment with the Configuration Wizard. Then, you can configure your environment further. For example, you can tune your servers to improve performance. You can change the default context root.
  - HCL Web Content Manager
    Set up a content server by installing HCL Web Content Manager in various deployments to provide robust and flexible environments for web content development and delivery. After you install the content server, more configuration steps must be completed according to the role that the server plays in your web content environment.
  - Syndication
    Use syndication to replicate web content library data from one server to another server. Syndication is based on a syndicator and subscriber relationship. The syndicator has the current data. The subscriber received the current data from the syndicator.
  - Database Management Systems
    Configure the connection between HCL Digital Experience and your database management system. The Database Transfer configuration option in the Configuration Wizard assigns users and permissions, creates databases, obtains support for database collation, and transfers your database.
  - User registry
    User information is stored in your user registry. You can enable LDAP referrals, configure HCL Digital Experience to use dynamic groups, update your user registry, or delete your user registry configurations.
  - Search
    You use Digital Experience Portal Search to search for text that is displayed in websites that are created by HCL Web Content Manager and additional web sources integrated to your Digital Experience platform.
  - Document Conversion Services
    Document Conversion Services are used when you work with HCL Web Content Manager authoring, previewing, and search.
    - Configure Document Conversion Services
      Learn how to configure the Document Conversion Services in HCL Portal. A knowledge of these prerequisites steps can assist you in preventing, identifying, and correcting problems that are related to Document Conversion Services.
      - Configuring Document Conversion Services for systems other than Windows
        Configure the Document Conversion Services to complete document conversions in an operating system other than Windows. You must complete the following steps whenever you start the Portal server from a new terminal window.
      - Configuring Document Conversion Services for IBM i
        Configure the Document Conversion Services to perform document conversions on IBM i systems. You need to complete the following steps whenever you start the Portal server from a new terminal window.
      - Configuring images for Document Conversion Services
        Configure the Document Conversion Services to view images in an operating system other than Windows.
    - Supported operating systems for document conversion services
      Some operating systems support running the DCS locally while others do not. The following table lists the operating systems and versions that support running the document conversion services. On operating systems that do not support running the DCS locally, document conversion must be done on a remote IBM WebSphere Application Server that supports document conversion services.
    - Setting up file type definitions to enable Document Conversion Services
      Set up file definition types to ensure that document conversions works for the Microsoft Office and OpenOffice file types.
    - Creating a backup of DCS files
      Document Conversion Services components in HCL Digital Experience software will be updated and replaced in 2022 in a subsequent HCL DX CF and Container Update release. HCL Digital Experience will remove the third-party component, which is supplied by Oracle, that provides these capabilities and replace them with HCL supported functions. After that point, HCL Digital Experience v8.5, v9, and v9.5 Container Update and CF releases will include the newer HCL supported component. Refer to the following HCL Digital Experience support Knowledge Article: Replacement of Document Conversion Services component in HCL Digital Experience software for additional information.
    - Using Document Conversion Services with Stellent
      For Linux and Solaris, when using Stellent version 8.1.0 and later, the X-server dependency has been removed.
    - Disable Oracle DCS
      Oracle DCS is disabled in the Digital Experience 95 Cumulative Fix and Container CF205 release.
    - Enable Apache Tika for DX Search
      Apache Tika for DX Search is supported and can be enabled in the Digital Experience 95 Cumulative Fix and Container CF205 release.
    - Configuring a remote Document Conversion Service
      To balance processing power, you can run document conversion services on a remote IBM WebSphere Application Server that supports document conversion services. Enabling the delegation of document conversion services to a remote server requires steps on both HCL Digital Experience and the remote server.
    - Files conversion supported by DCS
      View a list of file types that are supported by DCS for conversion.
  - Setting up a remote spell checker
    Using a local spell checker is not supported. You cannot run spell checker on 64-bit systems. Instead, you must install and configure spell checker on a remote application server and access that server from the local HCL Portal server.
  - HCL Connections
    HCL Connections portlets give the HCL Digital Experience users access to more collaboration and social networking features such as activities, blogs, and bookmarks.
  - Reference: Configuration properties
    For your convenience, the properties files that are used to configure HCL Digital Experience are included in the product documentation. Information that is specified in the properties files is used to configure databases, LDAP integration, security, including external security managers, and more.
- Backup and restore
  Backup and recovery of data files and databases is an essential operation for any business system, particularly for data and applications that run in production environments. Create and follow a plan for backing up and recovering data on all tiers of your HCL Digital Experience deployment. IBM Installation Manager must also be included in backup and recovery planning. If you back up the HCL Portal file structure and then install a fix pack, your HCL Digital Experience and IBM Installation Manager become out of sync after you restore the HCL Portal file system. This condition is not recoverable.
- Migrating
  Successful migration requires significant planning and preparation, understanding the tools that are involved, and careful execution of the appropriate steps in the order provided.
- Integrating
  Integrate HCL Digital Experience with software such as HCL Sametime to enable your users to collaborate more easily. You can also use the unified task list portlet to integrate HCL with your backend business process software, such as IBM Process Server.
- Administering
  Use the administration tools that are provided with the HCL Digital Experience to do various day-to-day administration tasks.
- Securing
  Security tasks include setting up property extension databases and custom user repositories, configuring and activating SSL, and configuring authentication. In addition, tasks such as activating Federal Information Processing Standards (FIPS) and NIST SP800-131a security modules and configuring external security managers such as Security Access Manager might be required to secure your portal environment.
- Monitoring
  HCL Portal includes tools and features to help you monitor the portal site.
- Setting up a website
  Setting up a website includes, creating pages, adding navigation, setting up search, and adding content to the site. Themes are used to customize the portal's look-and-feel. Out-of-the-box templates and the site wizard can help you set up your portal site faster. You can add wikis and blogs to your site and let users tag and rate content on your site.
- Staging to production
  During portal solution development, the solution is initially developed, tested, and refined on one server or a limited number of servers. The solution is deployed later on live systems, referred to as the production environment. The process of moving the solution from the development environment to the production environment is called staging.
- Developing
  This section includes developer documentation on extending applications and development assets for HCL Portal and HCL Web Content Manager.
- Docker and Containerization
  Find topic information about Docker and Containerization for HCL Digital Experience.
- Practitioner Studio
  Practitioner Studio is a newly designed user experience for HCL Digital Experience. Please see the following pages to understand how the new navigation is organized.
- HCL Experience API
  This shows developers how to provision, configure, and use the HCL Experience API with the HCL Digital Experience 9.5 platform.
- HCL Content Composer
  The HCL Content Composer delivers simplified processes for creating and managing Digital Experience site content.
- HCL Digital Asset Management
  HCL Digital Asset Management (DAM) adds a central platform to store and include rich media assets in Digital Experience site content to present engaging, consistently branded experiences across digital channels.
- The Woodburn Studio demo site
  The Woodburn Studio is a website that demonstrates the use of some of the popular HCL Digital Experience features.
- Reference
  View information that can help you use our product documentation including terms of use, trademarks, and more.

Configuring Document Conversion Services for IBM i | HCL Digital Experience

Configure the Document Conversion Services to perform document conversions on IBM i systems. You need to complete the following steps whenever you start the Portal server from a new terminal window.

Procedure

Log in to the WebSphere® Integrated Solutions Console.
Select Servers > Server Types > WebSphere application servers
Click the HCL Digital Experience server to open the configuration window.
Select Server Infrastructure > Java and Process Management > Process definition.
Select Additional Properties > Environment Entries.
Click LIBPATH to open the configuration window.
In the Value field, add the following information: :/QOpenSys/usr/bin:/QOpenSys/usr/bin/X11:/QOpenSys/usr/sbin.
Click Apply and save your changes to the master configuration.
The value for the LIBPATH environment entry displays as follows: ${WPS_HOME}/lwo/prereq.odc/shared/app/oiexport:/QOpenSys/usr/bin:/QOpenSys/usr/bin/X11:/QOpenSys/usr/sbin
Restart WebSphere® Application Server.