Home
Installation, Deployment, and Upgrade
Installing Unica Discover involves planning and preparing your environment, installing and configuring prerequisite software, obtaining the Unica Discover installation files, and running the Unica Discover installer.
Discover Network Capture Application Manual
Configuring the DNCA
The Unica Discover Network Capture Application can be configured through a web-based console or through the configuration files that are stored on the DNCA server. The following information guides you on how to configure the DNCA.
Configuration
System

Installation, Deployment, and Upgrade
Installing Unica Discover involves planning and preparing your environment, installing and configuring prerequisite software, obtaining the Unica Discover installation files, and running the Unica Discover installer.
- Installation and Deployment Manual
- Discover Network Capture Application Manual
  - Discover Network Capture Application Overview
    Network Capture Application from Discover captures and records the complete interaction between the visitor and the web application environment by using a network tap or network switch spanning port. The Network Capture Application software features the following benefits:
  - Installing the Network Capture Application
    The following instructions can be used to assist the installation of your Network Capture Application software.
  - Configuring the DNCA
    The Unica Discover Network Capture Application can be configured through a web-based console or through the configuration files that are stored on the DNCA server. The following information guides you on how to configure the DNCA.
    - Configuration via Web Console
    - DNCA configuration files
      Configuration settings that are related to the Unica DiscoverNetwork Capture Application are available through the DNCA Web Console or, if needed you can use the vi editor to edit the configuration files that are located in /usr/local/dncauser/etc/.
    - Configuration via dcx-conf.xml
    - Configuration using runtime.conf
      Configuration settings that are related to the Unica DiscoverNetwork Capture Application are available through the DNCA Web Console or, if needed, the dcx-conf.xml.
    - SSL Decryption
    - DNCA Discover Command Line Reference
    - Prerequisites
    - Supported Browsers for DNCA Web Console
    - Example Configuration
    - Configuration Steps
    - Open DNCA Web Console
    - Testing Your Configuration
    - DNCA Web Console Login
    - DNCA Web Console Logout
    - Web Console Tabs
    - Configuration
      - Enabling Web Console Authentication
      - Toggling HTTP/HTTPS Access
      - Deploying an SSL Certificate for the Web Console
      - Changing Web Console Listening Ports
      - IPv6 Support in the DNCA Web Console
      - SysInfo Page
      - System
      - dmesg
      - DNCA Web Console - Summary Tab
      - Web console security
        The following topics describe how to secure the web console.
    - Instance Compound Statistics
    - TCP Connections
    - Machine Health
    - Peers
    - Current Per Second Stats
    - Additional DNCA Web Console Debugging Information
    - Use Discover Transport Service as Time Source
    - Deliver Statistics to Discover Transport Service
    - DNCA Web Console - SSL Keys Tab
      You can use this tab to review and edit the Loaded keys list and Missing keys list. To toggle between the lists, use the appropriate radio button:
    - Pipeline Settings
      The Pipeline tab allows users to edit configuration parameters such as capture, limits, and cookie IDs.
    - Capture Type Lists
    - Rule Manipulation
    - Test Manipulation
    - Action Manipulation
    - Key Manipulation
    - Add/Edit Rules
    - Add/Edit Tests
    - Add/Edit Actions
    - Add/Edit Keys
    - Privacy.cfg Reference
    - Logging Changes
    - Reference
    - Stats per Instance
    - Checking on System Health through stats.xml
    - Capture Software Processes
    - DNCA Statistics
    - Heartbeat
    - Auto Settings
    - Remote Monitors
    - Network Interfaces
    - System Utilities
    - Accessing Debug page
    - Page Overview
    - Providing DNCA ZIP to Support
    - DNCA Configuration File dcx-conf.xml
      If you cannot login to the web console, you can edit dcx-conf.xml to configure the Unica Discover Network Capture Application.
    - Configuring Multiple Listend-Routerd Pairs
      Configure Multiple Listend-Routerd Pairs (MLRP) to use multiple NICs to capture network traffic in an environment that produces a high volume of network traffic.
    - Configuring SSL Pools
      You can create SSL pools to group a set of DNCA servers together so that the DNCA servers can share SSL session information.
    - Some SSL hits missing from Firefox browser sessions
    - Beats Tab
      The Beats tab was introduced to enable, disable, start, stop, and restart the Filebeat service. Open the DNCA application and access the Beats tab.
  - Upgrade for DNCA
    It is recommended that you always use the latest version of the Unica Discover Network Capture Application suitable for your version of Unica Discover.
  - Packet Forwarder Overview
    The Packet Forwarder is used to capture and forward hits to a cloud-based DNCA that is operating on a virtual machine.
  - SSL Keys
    For decrypting transmissions by using the SSL protocol, the Unica Discover Network Capture Application must be provided the SSL keys in use in the transaction stream.
  - Performance Measurement
    Performance measurement provides details on the Network Capture software performance and timestamp measurements.
  - Configuring DNCA on Red Hat Enterprise Linux™ (RHEL)
    The following sections contain important information for configuring DNCA in a Red Hat Enterprise Linux™ environment:
  - DNCA monitoring
    You can monitor the passive capturing to diagnose performance issues.
  - Overview of DNCA maintenance
    The maintenance utility performs routine maintenance and logging tasks for Discover DNCA. You can use the utility to help maintain the ability of the DNCA to perform DNCA.
  - DNCA frequently asked questions (FAQ)
    The following content contains frequently asked questions or scenarios that can be used to help isolate or fix an issue with your Network Capture Application.
  - Downloading Privacy Configuration
  - Enabling web console access through a single IP address
    You can specify a single IP address which can access the web console. Limiting access to a single IP address helps to prevent unauthorized access through an unknown system.
  - Applying authentication when accessing the web console
    You can improve security by enabling authentication to the web console.
- Unica Discover Session Archiving Installation Guide
  As you prepare for an installation, you need to gather some items, review hardware and software requirements, and then you can perform the installation.
- Discover Upgrade Manual

System

The following command can be used for either SLES and RHEL distributions, which have different filenames.

Command


cat /etc/*-release

Output


System
release info                 : LSB_VERSION="1.3"
Red Hat Enterprise Linux ES release 3 (Taroon Update 5)

Command


uname-a

Output


kernel info                   : Linux venus.Discover.com 2.4.21-32.EL #1 Fri \
> Apr 15 21:29:19 EDT 2005 i686 i686 i386 GNU/Linux

Command


cat /proc/cpuinfo

Output


processor                     : 0
vendor_id                    : GenuineIntel
cpu family                    : 6
model                            : 8
model name               : Pentium III (Coppermine)
stepping   : 3
cpu MHz                       : 664.526
cache size                    : 256 KB
fdiv_bug  : no
hlt_bug                         : no
f00f_bug  : no
coma_bug                   : no
fpu                                  : yes
fpu_exception           : yes
cpuid level                   : 2
wp                                  : yes
flags                               : fpu vme de pse tsc msr pae mce cx8 sep \
> mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips                     : 1327.10

Command


cat /proc/meminfo

Output


total:    used:    free:  shared: buffers:  cached:
Mem:  258945024 250028032  8916992        0 110923776 90759168
Swap: 534601728  5242880 529358848
MemTotal:       252876 kB
MemFree:          8708 kB
MemShared:           0 kB
Buffers:        108324 kB
Cached:          85572 kB
SwapCached:       3060 kB
Active:         183328 kB
ActiveAnon:      37496 kB
ActiveCache:    145832 kB
Inact_dirty:     35704 kB
Inact_laundry:    7588 kB
Inact_clean:      3436 kB
Inact_target:    46008 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:       252876 kB
LowFree:          8708 kB
SwapTotal:      522072 kB
SwapFree:       516952 kB
CommitLimit:    648508 kB
Committed_AS:   285972 kB
HugePages_Total:     0
HugePages_Free:      0
Hugepagesize:     4096 kB

Have feedback?
Google Analytics is used to store comments and ratings. To provide a comment or rating for a topic, click Accept All Cookies or Allow All in Cookie Preferences in the footer of this page.