Home
Administrator Guides
Configuration Properties Guide
Provides detailed information about the configuration of Unica Platform and other Unica products.
Unica Interact design environment configuration properties
This section describes all the configuration properties for Unica Interact design environment.
InteractDT | partitions | partition[n] | reports
The InteractDT | partitions | partition[n] | reports property defines the different types of folders for reports.

Administrator Guides
- Administrator Guide
  Provides detailed information about adminestering Unica Platform.
- Configuration Properties Guide
  Provides detailed information about the configuration of Unica Platform and other Unica products.
  - ML configuration properties
    The AI-ML configuration properties are available on the Settings > Configuration page.
  - Unica Audience Central configuration properties
  - Unica Campaign configuration properties
    The configuration properties of Unica Campaign are located at SettingsConfiguration. For more details on the configuration properties, see the Campaign Administrator Guide.
  - Unica Centralized Offer Management configuration properties
    This section describes the Unica Centralized Offer Management configuration properties.
  - Unica Collaborate configuration properties
    The Unica Collaborate Integration configuration properties are available on the Settings > Configuration page. For more details on the configuration properties, see the Unica Collaborate Administrator Guide.
  - Unica Contact Central configuration properties
    The Unica Contact Central configuration properties are available on the Setting > Configuration page. For more details on the configuration properties, see the Unica Contact Central Administrator Guide.
  - Unica Content Integration configuration properties
    The Unica Content Integration configuration properties are available on the Settings > Configuration page. For more details on the configuration properties, see the Content Integration Administrator Guide.
  - Unica Deliver configuration properties
    You access Unica Deliver configuration properties from the Settings menu in the Unica Platform. Properties for configuring Unica Deliver are contained in the Campaign and Deliver configuration categories.
  - Unica Insights Reports configuration properties
    The Unica Insights Reports configuration properties are available on the Settings > Configuration page. For more details on the configuration properties, see Unica Insights Reports Installation and Configuration Guide.
  - Unica Interact runtime environment configuration properties
    This section describes all the configuration properties for the Unica Interact runtime environment.
  - Unica Interact Simulator
    This section describes all the configuration properties for the Unica Interact simulator.
  - Unica Interact design environment configuration properties
    This section describes all the configuration properties for Unica Interact design environment.
    - InteractDT | general | logging
      The InteractDT | general | logging property defines the InteractDT logging related configuration.
    - InteractDT | general | monitoring
      Properties in this category are applicable when JMX connector needs to be enabled for Interact contact and response history module.
    - InteractDT | navigation
      Some of the properties in this category are used internally and should not be changed
    - InteractDT | partitions | partition[n] | Connections
      InteractDT|partitions|partition1|Connections configuration defines the Unica InteractDT optional communication with other Unica products like Unica Audience Central, Unica Segment Central, Unica Centralized Offers and Unica Campaign for access to Segments, Offers, Audience and flowcharts. The following are the categories along with their options:
    - InteractDT | partition | partition[n] | dataSources
      The properties in InteractDT|partitions|partition[n]|dataSources determine how Unica InteractDT interacts with databases, including its own system tables, for the specified partition.
    - InteractDT | partitions | partition[n] | internal
      Properties in this category specify integration settings and the internalID limits for the selected Unica InteractDT partition. If your Unica InteractDT installation has multiple partitions, set these properties for each partition that you want to affect.
    - InteractDT | partitions | partition[n] | reports
      The InteractDT | partitions | partition[n] | reports property defines the different types of folders for reports.
    - InteractDT | partitions | partition[n] | systemTableMapping
      If Unica Campaign is not installed, Unica InteractDT refers systemTableMapping configuration to map the product entities like Offer, Segment, flowchart, folder etc to their respective base table. The default values of all the required entities are already mapped and do not require any modification.
    - InteractDT | partitions | partition[n] | UnicaInsightsReports
      The InteractDT | partitions | partition[n] | UnicaInsightsReports property defines the different types of folders for reports.
    - InteractDT | partitions | partition[n] | Interact | contactAndResponseHistTracking
      These configuration properties define settings for the Unica Interact contact and response history module.
    - InteractDT | partitions | partition[n] | Interact | report
      These configuration properties define the report names when integrating with Cognos®.
    - InteractDT | partitions | partition[n] | Interact | learning
      These configuration properties enable you to tune the built-in learning module.
    - InteractDT | partitions | partition[n] | Interact | deployment
      These configuration properties define deployment settings.
    - InteractDT | partitions | partition[n] | Interact | serverGroups | [serverGroup]
      These configuration properties define server group settings.
    - InteractDT | partitions | partition[n] | Interact | flowchart
      These configuration properties define the Unica Interact runtime environment used for test runs of interactive flowcharts.
    - InteractDT | partitions | partition[n] | Interact | whiteList | [AudienceLevel] | DefaultOffers
      These configuration properties define the default cell code for the default offers table. You need to configure these properties only if you are defining global offer assignments.
    - InteractDT | partitions | partition[n] | Interact | whiteList | [AudienceLevel] | offersBySQL
      These configuration properties define the default cell code for the offersBySQL table. You need to configure these properties only if you are use SQL queries to get a desired set of candidate offers.
    - InteractDT | partitions | partition[n] | Interact | whiteList | [AudienceLevel] | ScoreOverride
      These configuration properties define the default cell code for the score override table. You need to configure these properties only if you are defining individual offer assignments.
    - InteractDT | partitions | partition[n] | Interact | outboundChannels
      These configuration properties enable you to tune the outbound channels for triggered messages.
    - InteractDT | partitions | partition[n] | Interact | Simulator
      These configuration properties define the server group you want to use to run API simulations.
    - InteractDT | partitions | partition[n] | Interact | dataGovernance
      dataGovernance is used to configure the masking values to be used for Text/Numeric/Date data types. The values configured here shall be used to mask the profile attributes as per their data type.
    - InteractDT | partitions | partition[n] | Interact | offerArbitration
      OfferArbitration allows you to make offers-related miscellaneous configurations for Interact Design time. It allows you make Campaign as an optional property of Strategy.
  - Unica Journey configuration properties
    The Unica Journey configuration properties are available on the Settings > Configuration page. For more details on the configuration properties, see the Journey Administrator Guide.
  - Unica Plan configuration properties
    The Unica Plan configuration properties on available on the Settings > Configuration page. For more details on the configuration properties, see the Plan Administrator Guide.
  - Unica Platform configuration properties
    This section describes the Unica Platform configuration properties on the Configuration page.
  - Unica Segment Central configuration properties
- System Tables

InteractDT | partitions | partition[n] | reports

The InteractDT | partitions | partition[n] | reports property defines the different types of folders for reports.

interactAnalysisOnDemandFolder

Description: Report server folder string for Interact Analysis menu reports.
Default value: /content/folder[@name='Affinium Campaign']/folder[@name='Interact Reports']
Availability: This property is applicable only if you install Unica Interact.

interactiveChannelAnalysisTabOnDemandFolder

Description: Report server folder string for Interactive Channel analysis tab reports.
Default value: /content/folder[@name='Affinium Campaign - Object Specific Reports']/folder[@name='interactive channel']
Availability: This property is applicable only if you install Unica Interact.

Rate this topic

5 stars 4 stars 3 stars 2 stars 1 star

Comment on this topic.

By clicking this box, you acknowledge that you are NOT a U.S. Federal Government employee or agency, nor are you submitting information with respect to or on behalf of one. HCL provides software and services to U.S. Federal Government customers through its partners immixGroup, Inc. Contact this team at https://hcltechsw.com/resources/us-government-contact. Do not include any personal data in this Comment box.