Home
Tester Guide
This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing.
API Tester Guide
This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing. This guide is intended for API testers.
API Testing
You can use find information about the tasks that you can perform for testing various domains, technologies, or applications.
Testing with Software AG webMethods
You can configure and run HCL OneTest™ API with the Software AG webMethods Integration Server to connect to Software AG webMethods Broker and Integration Server resources.
Setting up webMethods Integration Server
To integrate Software AG webMethods Broker and webMethods Integration Server with HCL OneTest™ API, configure the required webMethods libraries through the Library Manager and deploy certain HCL OneTest API files to webMethods Integration Server.
Enabling data source access for the JDBC adapters in Software AG webMethods Integration Server
In Software AG webMethods Integration Server, a container obtains the location of the data source by an internal lookup that happens outside of the regular JNDI interfaces. Therefore, specifying alternate connections is not possible. To overcome this problem, augment the configuration with additional properties where applicable.

Tester Guide
This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing.
- API Tester Guide
  This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing. This guide is intended for API testers.
  - API Testing
    You can use find information about the tasks that you can perform for testing various domains, technologies, or applications.
    - Testing Java™ applications
      You can use HCL OneTest™ API to test Java™ applications.
    - Testing Java™ Message Service (JMS) systems
      Use the generic JMS plug-in to connect HCL OneTest™ API to a wide range of EAI platforms, which includes any vendor that provides an implementation of this Java™ standard. JMS provides a way of separating the application from the transport layer of providing data. The same Java classes can be used to communicate with different JMS providers by using the JNDI information for a specific provider. The classes first use a connection factory to connect to the queue or topic, and then use populate and send or publish the messages. On the receiving side, the clients then receive or subscribe to the messages
    - Testing Java™ objects
      You can import Plain Old Java™ Objects (POJOs) from JAR files into HCL OneTest™ API in order to parse and construct messages containing the serialized forms of those objects. You can construct and parse the Java objects and perform validation, but you cannot test the objects directly.
    - Testing with Apache Camel components
      You can use HCL OneTest™ API to create tests and stubs by setting up an Apache Camel component in an HCL OneTest API project. You can configure the technology endpoints supported by the Camel component as the physical resources in the HCL OneTest API project and test for the services provided by the technology.
    - Testing with Apache Kafka
      Starting from HCL OneTest™ API 10.0.2 and later, you can create Kafka transports to test Kafka services.
    - Testing with Docker
      You can use Docker containers with HCL OneTest™ API to run stubs co-located with your test systems.
    - Testing with the email transport
      When you use applications in your test environment that use email services, you can use HCL OneTest™ API to create tests and stubs for testing the email services. You can set up an email transport in an HCL OneTest API project and configure the email servers as the physical resources in the HCL OneTest API project, and then test the email services.
    - Testing with Envoy Proxy (Experimental)
      You can use HCL OneTest™ API to record the HTTP traffic on the Envoy Proxy by using the Experimental HTTP Tap Filter feature of the Envoy Proxy.
    - Testing with the File transport
      As with any other transport, the File transport includes both logical and physical configurations. Tests and stubs are associated with the logical File resource, which represents an abstraction of the File resource and is the same for all environments. The physical File Access configuration includes connection details, and you can configure a different physical File Access for each environment.
    - Testing with the FIX transport
      You can use the Financial Information eXchange (FIX) transport and FIX dictionaries in HCL OneTest™ API to help you test trade-related messages and the systems that use them.
    - Testing with the HTTP transport
      To provide support for HTTP-based communications, you must configure and run HCL OneTest™ API by using the HTTP transport and SOAP message formatters.
    - Testing with IBM® API Developer Portals
      You can configure HCL OneTest™ API to synchronize IBM API Connect™ Developer Portal resources or IBM® API Management Developer Portal resources.
    - Testing with IBM® App Connect Enterprise
      When you want to test the services on applications deployed by the integration node of IBM® App Connect Enterprise, you can use the synchronization feature in HCL OneTest™ API to import details of deployed applications into an HCL OneTest API project. You can select the tests and stubs to be created in your project during the synchronization process in HCL OneTest API.
    - Testing with IBM® Integration Bus
      When you want to test the services on applications deployed by the integration node of IBM® Integration Bus, you can use the synchronization feature in HCL OneTest™ API to import details of deployed applications into an HCL OneTest API project. You can select the tests and stubs to be created in your project during the synchronization process in HCL OneTest API.
    - Testing with IBM® WebSphere® Application Server
      You can configure HCL OneTest™ API to synchronize IBM® WebSphere® Application Server resources.
    - Testing with IBM® WebSphere® MQ messages
      You can test WebSphere® MQ messages using the WebSphere MQ transport method or JMS interface. HCL OneTest™ API also supports testing WebSphere MQ on z/OS systems.
    - Testing with WebSphere® Portal
      You can configure HCL OneTest™ API to synchronize IBM® WebSphere® Portal resources.
    - Testing with IBM® z/OS® Connect Enterprise Edition
      IBM® z/OS® Connect Enterprise Edition provides a framework for enabling z/OS®-based programs and data to fully participate in the new API economy for mobile and cloud applications. Use IBM® z/OS® Connect Enterprise Edition to access z/OS subsystems, such as CICS®, IMS™ and Batch, by using RESTful APIs with JSON formatted messages. You can access multiple z/OS subsystems concurrently through a common interface.
    - Testing with Istio
      When you have applications hosted in a Kubernetes cluster that have Istio as a service mesh, you can virtualize the services in the cluster by creating stubs and tests for testing with Istio in HCL OneTest™ API.
    - Testing with Kubernetes
      For testing with Kubernetes set up a Kubernetes cluster, and then you can create and publish stubs from HCL OneTest™ API so that stubs can be run within Kubernetes. The stubs published can be co-located with existing services running within the Kubernetes cluster.
    - Testing with Microsoft™ .NET objects
      You can import serializable .NET objects from .NET assembly files (.exe or .dll) into HCL OneTest™ API and apply them to messages in the same way as you would apply a schema. A service-based test or stub can then send and receive a message containing a serialized form of a .NET object from the assembly file. You can construct and parse the .NET objects and perform validation, but you cannot test the objects directly.
    - Testing the migrated Postman collections
      You can migrate Postman collections and environments that you created in Postman to HCL OneTest™ API. Operations, transports, tests and stubs are automatically created during migration and you can run the tests and stubs in HCL OneTest API.
    - Testing with MongoDB
      If you are using HCL OneTest™ API 9.5.0 or later, you can create MongoDB transports and run tests against them.
    - Testing with the MQ telemetry transport
      If you are using HCL OneTest™ API 8.6.0 or later, you can create MQ telemetry transports.
    - Testing with Oracle Fusion
      Configure and run HCL OneTest™ API with the Oracle Fusion plug-in, which provides support for synchronization with and testing of the web services and composites that are available on a configured SOA server (that is, an Oracle WebLogic server with Oracle SOA Suite 11g deployed on it).
    - Testing with RabbitMQ
      If you are using HCL OneTest™ API 9.2.1.1 or later, you can create RabbitMQ transports.
    - Testing with SAP applications
      You can use HCL OneTest™ API to test SAP application server resources.
    - Testing with Software AG CentraSite
      You can incorporate governance in your SOA by using the integration of HCL OneTest™ API with Software AG CentraSite.
    - Testing with Software AG Universal Messaging
      You can use HCL OneTest™ API API to test Software AG Universal Messaging Broker server resources. From HCL OneTest API 10.0.2 or later, you can create Software AG Universal Messaging Broker transports, configure and run HCL OneTest API with the Software AG Universal Messaging server.
    - Testing with Software AG webMethods
      You can configure and run HCL OneTest™ API with the Software AG webMethods Integration Server to connect to Software AG webMethods Broker and Integration Server resources.
      - Setting up webMethods Integration Server
        To integrate Software AG webMethods Broker and webMethods Integration Server with HCL OneTest™ API, configure the required webMethods libraries through the Library Manager and deploy certain HCL OneTest API files to webMethods Integration Server.
        Software AG webMethods requirements
        To use Software AG webMethods with HCL OneTest™ API, you need Software AG webMethods Broker and Software AG webMethods Integration Server.
        Installing the webMethods Integration Server adapter package
        To run HCL OneTest™ API tests, you must install the HCL OneTest API webMethods Integration Server adapter package on every webMethods Integration Server.
        Deploying JDBC proxy into Software AG webMethods Integration Server
        You must deploy the JDBC proxy on each application server that is running webMethods Integration Server (WMIS). With the JDBC proxy, you can allow a server that hosts applications to use JDBC to access a live database to be recorded or virtualized.
        Enabling data source access for the JDBC adapters in Software AG webMethods Integration Server
        In Software AG webMethods Integration Server, a container obtains the location of the data source by an internal lookup that happens outside of the regular JNDI interfaces. Therefore, specifying alternate connections is not possible. To overcome this problem, augment the configuration with additional properties where applicable.
        Configuring Software AG webMethods Integration Server to use the HTTP/TCP proxy
        You can configure the webMethods Integration Server to use the proxy by editing the server startup script.
        Managing webMethods recorders
        To manage webMethods recorders, you must configure the integration by changing values in a properties file.
        webMethods network settings
        HCL OneTest™ API application preferences in the Library Manager utility include two settings that are specific to webMethods Integration Server that are WMIS Server Port and WMIS Server Bind Address.
      - webMethods Broker transport
        You can create the webMethods Broker transport while creating a physical webMethods Broker resource in HCL OneTest™ API’s Architecture School. You can then configure it from the webMethods Broker resource in the Architecture School’s Physical View.
      - Configuring Integration Server transport
        Software AG webMethods Integration Server connects all the systems and applications in an enterprise by means of a single integration backbone.
      - Using webMethods Integration Server services
        There are several ways that Integration Server publishers and subscribers can be used in HCL OneTest™ API.
    - Testing with SSL
      To provide secure connections between clients and servers during testing, you can use the Secure Sockets Layer (SSL) technology supported by HCL OneTest™ API.
    - TCP and UDP
      In HCL OneTest™ API, you can create transports that facilitate communication between clients and servers by using both TCP- and UDP-based sockets.
    - Testing with TIBCO applications
      To use HCL OneTest™ API to test TIBCO messaging, you must configure and run HCL OneTest API with the TIBCO messaging plug-in. Doing so supports TIBCO Rendezvous messaging ("plain" TIBCO Rendezvous messaging and TIBCO ActiveEnterprise (AE) formats), TIBCO EMS messaging, and sending and receiving AE messages by using TIBCO EMS.
    - Testing applications on z/OS®
      You can test applications on IBM® z/OS® systems by using the capabilities that are supported for mainframes by HCL OneTest™ API.
    - Configuration of virtual IP addresses as virtual clients
      You can find information about how to configure virtual IP addresses in the operating system, and then use the virtual IP addresses to configure them as virtual clients in tests or as virtual servers in stubs.
    - Security vulnerabilities testing by using HCL® AppScan
      You can use HCL® AppScan to scan all HTTP traffic that is generated as part of integration testing in HCL OneTest™ API for security vulnerabilities.
  - Extending HCL OneTest™ API functionality by using custom functions
    You can add more calculations and operations to tests by using the HCL OneTest™ API custom function class. HCL OneTest API custom function is a Java™ class that extends the com.ghc.ghTester.expressions function.
  - Working in non-GUI mode
    You can use the tools and executable files that are provided along with the product software. You can use these tools to perform different test actions in a non-GUI mode.
- Tester Guide - Service Virtualization
  This guide describes the tasks that you can perform for using virtual services or stubs to simulate parts of an environment if the real services are not yet available or because they are difficult or expensive to use. This guide is intended for API Testers.

Enabling data source access for the JDBC adapters in Software AG webMethods Integration Server

In Software AG webMethods Integration Server, a container obtains the location of the data source by an internal lookup that happens outside of the regular JNDI interfaces. Therefore, specifying alternate connections is not possible. To overcome this problem, augment the configuration with additional properties where applicable.

About this task

The process of configuring the JDBC adapter in Software AG webMethods Integration Server has the following steps:

Load the HCL OneTest™ API data source driver by changing the class of the data source implementation to com.greenhat.jdbc.ConnectionPoolDataSource.
Specify the existing value in the dataSourceClass property so that it can access the underlying implementation source.

Procedure

In webMethods Integration Server Administrator console, under the Adapters box, click JDBC Adapter. The View Connection dialog box opens.
Disable the existing data source.
Copy the value set in the DataSource Class field. You will use this value in Step 5 .
Set DataSource Class to com.greenhat.jdbc.ConnectionPoolDataSource.
Add the following name-value pairs to the Other Properties field:
- dataSourceClass=The value that you copied in Step 3 - for example, dataSourceClass=oracle.jdbc.pool.OracleDataSource
- liveDatabaseURL=The URL of the HCL OneTest™ API physical resource - for example, liveDatabaseURL=jdbc:oracle:thin:@localhost:1521:XE.
Note: Ensure that the field does not have any liveJNDIName property set.
Optional: To connect to a virtual database instance, add the following name-value pairs to the Other Properties field: virtualDBProperties=databaseName=gh|user=gh|password=gh. You can use any data source property supported by Oracle or Microsoft™ SQL providers.

Note: Format the values as name=value pairs separated by "|" (vertical pipe symbol).
Enable the data source.
Verify that the configuration works as expected.

Results

You can record, create, edit, or run stubs and implement virtualization with the built-in database.