Home
Test Author Guide
This guide describes how to create test scripts in HCL OneTest™ Performance and enhances tests by applying different test elements such as dataset, variables, and verification points. This guide is intended for testers.
Emulating workloads
You emulate a workload by creating a schedule and adding user groups/rate runner groups, tests, and other elements to it.
Creating a VU Schedule
By creating a VU Schedule, you can accurately emulate the actions of individual users.
Adjusting user groups
You can adjust multiple user groups simultaneously to distribute a load across groups and to set the groups to run on the workbench computer. Typically, when you run VU Schedule, user groups run on remote agent computers, not on the local workbench computer.

Test Author Guide
This guide describes how to create test scripts in HCL OneTest™ Performance and enhances tests by applying different test elements such as dataset, variables, and verification points. This guide is intended for testers.
- Creating tests
  To create a test, you record representative interactions with an application.
- Editing tests
  After you record a test, you can edit it to include datasets (to provide variable data rather than the data that you recorded), verification points (to confirm that the test runs as expected), and data correlation (to ensure that returned data is appropriate for the corresponding request). You can also add protocol-specific elements to a test. When you edit a test, the modified items appear in italic type. The italic type changes to regular type after you save the test.
- Compound tests
  You can create compound tests to help you organize smaller tests into scenarios that can then be run end-to-end. You can combine tests from different extensions to achieve end-to-end flow.
- Simulating services with stubs
  Service stubs enable you to simulate the behavior of an actual service for a wide variety testing or integration purposes.
- Sending service requests with the generic service client
  The generic service client enables you to send requests to services for which you do not have a convenient client and to view the responses returned by the service.
- Emulating workloads
  You emulate a workload by creating a schedule and adding user groups/rate runner groups, tests, and other elements to it.
  - Schedule overview
    A schedule is the "engine" that runs a test. However, schedules are much more than simple vehicles for running tests. You can design or emulate the real-life workload by creating various groups and dividing the load across different remote agents that generate load on the application under test. A schedule can be as simple as one virtual user or one iteration running one test, or as complicated as hundreds of virtual users or iteration rates in different groups, each running different tests at different times.
  - Creating a VU Schedule
    By creating a VU Schedule, you can accurately emulate the actions of individual users.
    - Setting the user load
      By setting stages, you can model workloads over time and change the number of users that perform certain tasks to reflect real-world usage. You can vary the user load and collect performance metrics for each stage independently, which means that a single run can more efficiently accomplish the work of multiple runs that require shutting down and restarting users. Each stage, which lasts a specific amount of time and contains a specific number of users, defines a different load.
    - User group overview
      User groups enable you to group tests in a logical order.
    - Adding a user group to VU Schedule
      By defining user groups, you can group related tests and run the tests in parallel. Tests belonging to different user groups run in parallel.
    - Adjusting user groups
      You can adjust multiple user groups simultaneously to distribute a load across groups and to set the groups to run on the workbench computer. Typically, when you run VU Schedule, user groups run on remote agent computers, not on the local workbench computer.
    - Emulating slower network traffic (HTTP)
      You can emulate various WAN connection speeds used for HTTP traffic to determine its effect on response times and throughput.
    - Running a user group at a remote location
      You can run a user group at a remote location (also called an agent computer), rather than on your local computer, to prevent your workbench activity from affecting the ability to apply load.
    - Delaying virtual users or actions
      By adding a delay to a schedule or a compound test, you can emulate user actions more accurately.
    - Synchronizing users
      Inserting a synchronization point enables you to coordinate the activities of a number of virtual users by pausing and resuming activities. You can synchronize all virtual users at the beginning of a schedule and stagger the release times so that the users do not overload the system. Synchronization points are also useful in stress testing.
  - Creating a Rate Schedule
    By creating a Rate Schedule, you can model the different behaviors of how the application is accessed and measure the rate accuracy.
  - Think time overview
    Think time is a delay in the processing of a request to reproduce the time that a human would take to read or examine the data that is displayed from a previous user action. Think time is calculated from the time that a request is received (that is, the display is complete on the monitor) until the time that the user clicks a key or link to perform an action.
  - Working with agents
    If you have a significant workload to test, typically a single computer might not be able to process the load efficiently. You need to distribute the load across multiple computers, also called HCL OneTest™ Performance agents. The agents are installed on computers to generate the load on the application.
  - Adding a test to a schedule
    By adding a test to a schedule, in this context, is used to refer to both VU Schedule and Rate Schedule, you can emulate the action of an individual user.
  - Adding must run tests
    In a schedule, you can use the Finally block to specify tests that must be run after the main workload is completed, when the last stage duration is expired, or a schedule is stopped manually.
  - Assigning variables
    In addition to assigning variables at the test level, you can assign variables at the schedule, in this context, is used to refer to both VU Schedule and Rate Schedule level and User or Rate Runner group level. When you assign variables at the schedule level, all the tests and groups in the schedule can use the variable initial values, if they have the same variable names.
  - Defining performance requirements in schedules
    You can define performance requirements to specify the acceptable thresholds for the performance parameters in a schedule. The performance requirements that you define can also be used to validate the service-level agreements.
  - Repeating tests in a schedule
    By adding a loop to a schedule, in this context, is used to refer to both VU Schedule and Rate Schedule, you can repeat a test for a number of iterations and set the rate for running a test. If the loop contains a synchronization point, the synchronization point is released after the first iteration of the loop and stays released for all further iterations.
  - Creating rate generators in user groups
    A rate generator is a workload container that specifies the number of tasks that the virtual testers run in a given time period. For example, you might be testing an Order Entry group that completes 10 forms every hour, or you might be testing a web server that you want to be able to support 100 hits every minute. Use a rate generator to model this time-based behavior.
  - Running tests at a set rate
    To run a test at a set rate, you add a loop to the schedule to control the iteration rate, and then add tests to the loop. The tests, which are children of the loop, are controlled by the loop. If the loop contains a synchronization point, the synchronization point is released after the first iteration of the loop and stays released for all further iterations.
  - Running tests in random order
    A schedule that contains only user groups and tests will run each test in a user group sequentially. By adding a random selector to a schedule, you can repeat a series of tests in random order, thus emulating the varied actions of real users.
  - Adding a transaction to a schedule
    A transaction is a specific group of test elements whose performance you are interested in. When viewing the test results, you can view performance data about any transactions that you have added.
  - Emulating network traffic from multiple hosts
    By default, when you run a schedule, each virtual user has the same IP address. However, you can make each virtual user appear as though it is running on its own host. To do this, you configure IP aliases on the host computer, and enable IP aliasing in the schedule. When you run the schedule, the network traffic will appear to be generated by multiple hosts.
  - Monitoring resource data
    Resource Monitoring is used to capture data, such as processor or memory usage, while running a test schedule. It can provide a comprehensive view of a system under test, to help identify issues. You can monitor data sources from a local or cloud schedule, or from a Service.
  - Resource Monitoring Service
    When you apply load to a system under test, the system's resources are consumed increasingly. If the capacity of the resources does not match the load, you will notice performance degradation in the results. With the Resource Monitoring Service, you can continually observe the health of the system's resources.
  - Monitoring response time breakdown
    You can use response time breakdown to see statistics on any page element that is captured while running a test schedule or imported from historical data.
  - Setting log and statistic levels
    Within a schedule, you set the size and sampling rate of the test log and the problem determination log, as well as the statistics that are displayed during a run.

Adjusting user groups

You can adjust multiple user groups simultaneously to distribute a load across groups and to set the groups to run on the workbench computer. Typically, when you run VU Schedule, user groups run on remote agent computers, not on the local workbench computer.

Procedure

In the Test Navigator, double-click the VU Schedule.
Under Schedule Contents, select the groups to adjust.
Under User Group Details, adjust the group sizes or set all groups to run on the workbench computer.
Option Description
Percentage Click to distribute the load for the user group based on percentage.
Absolute Click to distribute the load for the selected user group,based on absolute numbers.

Option	Description
Percentage	Click to distribute the load for the user group based on percentage.
Absolute	Click to distribute the load for the selected user group,based on absolute numbers.