Home
Troubleshooting Guide
This guide describes how to analyze and resolve some of the common problems that you might encounter while you work with HCL OneTest™ Performance.
Performance testing error messages
Find more information about the error messages.
RPTX2023W
Error occurred while update the run status back to the RQM server. This may cause the RQM test progress page to contain inaccurate data.

Troubleshooting Guide
This guide describes how to analyze and resolve some of the common problems that you might encounter while you work with HCL OneTest™ Performance.
- Troubleshooting performance testing
  This topic provides information about how to troubleshoot several problems with HCL OneTest™ Performance.
- Performance testing error messages
  Find more information about the error messages.
  - PRXE0101W
    %1 terminating due to exception: %2
  - PRXE4943W
    Transaction [%1] has been aborted.
  - PRXE4951I
    User group [%1] was not found.
  - RMSE0003W
    RMSE0003W There are currently no selected counters for the source named {0}.
  - RMSE0004W
    RMSE0004W The source named {0} is no longer available.
  - RMSE0005W
    RMSE0005W The source named {0} is reporting the error message {1}.
  - RMSE0006W
    The server does not support resource monitoring labels.
  - RPAC0001W
    The JAR %1 referenced in preferences could not be found. Preferences on the cloud workbench will be cleared.
  - RPHD1032E
    Error occurred while instructing __PT_ACRONYM__ engine to enable real-time protocol data for user: %1. It's possible that no data will be seen for this user in the Protocol Data view.
  - RPHD1034E
    Error occurred while instructing __PT_ACRONYM__ engine to disable real-time protocol data for user: %1. It's possible that data for this user will continue to be displayed in the Protocol Data view.
  - RPHE0001E
    example of translatable error message %1
  - RPHE0010W
    Unknown authentication scheme '%1' discovered in HTTP 401 response, ignoring.
  - RPHE0011W
    Unrecognized authentication header '%1' discovered in HTTP 401 response, ignoring.
  - RPHE0012W
    No authentication headers found in HTTP 401 response, ignoring.
  - RPHE0013W
    The server requested NTLM authentication but no NTLM authentication context was supplied with this request. Authentication is not possible.
  - RPHE0014W
    NTLM authentication failed for this request. Verify that the NTLM authentication context values for this request are correct.
  - RPHE0100W
    Host name '%1' can not be resolved.
  - RPHE0101W
    Encountered error while updating dynamic cookie cache while interpreting 'Set-Cookie' header with value '%1' sent from web-server '%2' retrieving URI '%3'. Explanation message: '%4'. Cache not updated to include this cookie value.
  - RPHE0102W
    Unexpected challenge(HTTP status code=401) received during HTTP playback to web-server '%1' retrieving URI '%2'. This behavior differs from the behavior recorded during test creation. For authentication to playback correctly a challenge must be recorded during test creation.
  - RPHE0103W
    Authentication failed during HTTP playback to web-server '%1' retrieving URI '%2'. Probable cause: username '%3' and/or password '%4' incorrect.
  - RPHE0104W
    Exception occurred during attempt to write request to web-server '%1' getting url '%2'. Explanation: %3
  - RPHE0105W
    General un-handled exception occurred during socket I/O read from web-server '%1' retrieving URI '%2'. Explanation message: '%3'.
  - RPHE0106W
    A read time-out occurred during a socket I/O read from web-server '%1' retrieving URI '%2'. Since this URI is the primary request for the current page all secondary requests will be skipped and the next page will be attempted. Current time-out value of '%3' milliseconds should be increased if long delays are expected on this page.
  - RPHE0107W
    A read time-out occurred during a socket I/O read from web-server '%1' retrieving URI '%2'. This secondary request will be skipped. Current time-out value of '%3' milliseconds should be increased if long delays are expected on this request.
  - RPHE0108W
    A connect time-out occurred during a socket I/O connect to web-server '%1' attempting to retrieve URI '%2'. Since this URI is the primary request for the current page all secondary requests will be skipped and the next page will be attempted.
  - RPHE0109W
    A connect time-out occurred during a socket I/O connect to web-server '%1' attempting to retrieve URI '%2'. This secondary request will be skipped.
  - RPHE0110W
    Unexpected challenge(HTTP status code=407) received while accessing HTTP proxy '%1' retrieving URI '%2'. This behavior differs from the behavior recorded during test creation. For authentication to playback correctly a challenge must be recorded during test creation.
  - RPHE0111W
    Authentication failed accessing proxy-server '%1' retrieving URI '%2'. Probable cause: username '%3' and/or password '%4' incorrect.
  - RPHE0112W
    An error occurred during decoding of content received from web-server '%1' attempting to retrieve URI '%2'. Explanation message: '%3'.
  - RPHE0113E
    Error encountered during the process of URI substitution for host=%1 and URI =%2 . Data correlation supplied a malformed URI=%3 . Explanation: %4. If you attempted to perform a custom data substitution on this URI ensure it has proper URI syntax. If you did not perform a custom data substitution then an internal may have been encountered and you should contact product support for further problem determination.
  - RPHE0113W
    An error occurred during encoding of an annotated execution history event property. Explanation message: '%1'.
  - RPHE0114E
    An error was encountered during transform of response data. %1
  - RPHE0114W
    Exception occurred during attempt to write request to proxy-server '%1' getting URL '%2' on host '%3'. Explanation: %4.
  - RPHE0115E
    An error was encountered during un-transformation of request data. %1
  - RPHE0115W
    Unable to successfully establish a connection to web-server '%1' retrieving URI '%2'. Web-server closing the connection after connection was just established.
  - RPHE0117W
    Unexpected exception occurred during connection close to web-server '%1' retrieving URI '%2'. Explanation: %3.
  - RPHE0118W
    HTTP parsing error encountered while retrieving URI '%1' from web-server '%2'. If this URI is the primary request for the current page all secondary requests will be skipped and the next page will be attempted.
  - RPHE0119E
    IP aliasing is enabled but no IP address was found for virtual user %1. Verify correct network interface name(s) are specified.
  - RPHE0120E
    Exception occurred during attempt to connect to proxy-server '%1' getting URL '%2' on host '%3'. Explanation: %4.
  - RPHE0121E
    Unable to authenticate with the proxy-server. Possible solution: re-record test due to possible proxy-server '%1' authentication changes.
  - RPHE0122W
    Web-server '%1' unexpectedly closed the connection while in the process of retrieving URI '%2'. The response body MAY be incomplete due to a missing "chunk". If missing chunk was last (zero length) chunk, data is complete.
  - RPHE0123W
    Infinite redirection loop detected getting URL '%1'. If this is expected and understood increase RPT_VMARGS rptMaxRedirection parameter. Redirected history %2
  - RPHE0124W
    Unexpected server redirection occurred getting URL '%1'. We were redirected to the same URI which issued this request. Redirected history %2
  - RPIB0007E
    %1
  - RPKG0090E
    Exception thrown while creating connection variables
  - RPKG0100E
    Exception thrown by the launch configuration core
  - RPKG0101E
    Exception thrown during an update to a launch configuration
  - RPKG0110E
    The data source type %1 is not expected
  - RPSE0014W
    SAP Calendar dialog could have unpredictable behavior during playback, set the date directly in the field using string format.
  - RPSF0114E
    SAP GUI Application creation failed
  - RPSF0172E
    __PT_ACRONYM__/SAP: Unable to start SAP GUI, please check SAP GUI installation.
  - RPSF0195E
    Connection with SAP GUI existing session or shortcut not allowed during schedule execution.
  - RPTA0000W
    %1
  - RPTA0001I
    Setting the log verbosity left me with %1 users
  - RPTA0002E
    A Test cannot be launched on the specified Driver
  - RPTA0003E
    %1
  - RPTA0004E
    A Test could not be launched on Driver: %1. The Test Execution Framework was not able to deliver an Executor. This is an internal error, please contact support. For more information, see the Troubleshooting section of the online help.
  - RPTA0009E
    A Test could not be launched on Driver: %1 due to an internal error. Please see Problem Determination Log. For more information, see the Troubleshooting section of the online help.
  - RPTA0010E
    An error has been encountered while launching a Test on Driver: %1. Please see Problem Determination Log. For more information, see the Troubleshooting section of the online help.
  - RPTA0011E
    An error has been encountered while launching a Test on Driver: %1. An Executor was not returned and neither was an error message. This is an internal error, please contact support.
  - RPTA0012E
    An error has been encountered while launching a Test on Driver: %1. There are no Data Processors present. This is an internal error, please contact support.
  - RPTA0013E
    An error has been encountered while launching a Test on Driver: %1. Data Processors have not been configured correctly. This is an internal error, please contact support. For more information, see the Troubleshooting section of the online help.
  - RPTA0014E
    A Test could not be launched on Driver: %1. The Test Execution Framework encountered an Exception. This is an internal error, please contact support.
  - RPTA0015E
    An error was encountered while launching a Test on %1.\nPlease examine your Deploy Directory: %2, the error could be caused by one of the following:\n\n1. The Deploy Directory path must be absolute (start with Drive Letter or "/").\n2. The Deploy Directory path must be valid for the Target Operating System.\n3. The __VENDOR_NAME__ Agent Controller must have authority to this directory.\n4. An error was encountered while deploying to this directory.
  - RPTA0016E
    An error has been encountered while launching the test. A required dataset %1 is missing or invalid in your project.
  - RPTA0017E
    An error has been encountered while launching the test. A required dataset %1 has been replaced. One or more test(s) are referencing a different version of the dataset.
  - RPTA0018E
    ready
  - RPTA0019E
    not ready on port
  - RPTA0020E
    Check Agents Failed
  - RPTA0021E
    %1 deployment directory %2 format not compatible for operating system %3. For more information, see the Troubleshooting section of the online help.
  - RPTA0023E
    Virtual users have exited prior to stage completion. At the end of stage %1 there were %2 users running when %3 were expected. A common reason for this is a schedule which has assigned an insufficient amount of work (for one or more User Groups), to keep the associated virtual users active for the full amount of time specified by the stage duration(s). Review the schedule for sufficient workload. When using multiple stages it is strongly recommended to use infinite loops to ensure that virtual users always have enough work scheduled regardless of the total duration of all the stages. Another possible reason is that one or more virtual users exited upon encountering a serious error; consult the Test Log or Common Base Event XML log on the agent for more information. Also see the Troubleshooting section of the online help.
  - RPTA0024E
    Exception encountered adding or removing users.
  - RPTA0025E
    The schedule has no user group.
  - RPTA0026E
    The RPT_VMARGS option rptPre811PageResponseTimes is specified on at least one location and is missing from at least one other location. Please ensure that either all locations include this option or none do. See "adjusted page response time for increased accuracy" in the help for more information.
  - RPTA0025I
    Run Completed (%1)
  - RPTA0026I
    Run Terminated (%1)
  - RPTA0027I
    %1: %2
  - RPTA0031E
    Location template file %1 is not found (referenced from location file %2)
  - RPTA0032I
    Found location template [%1] for [%2] (instances found: %3)
  - RPTA0033I
    %1 remote location(s) associated with location template [%2]
  - RPTA0034E
    Cannot change stage duration if Until Finished specified
  - RPTA0035E
    Duration time specified is less than what has already elapsed
  - RPTA0036E
    Schedule must be in the Running state to change stage duration
  - RPTA0037E
    Agent %1 not ready, time of last contact: %2
  - RPTA0038E
    No successful contact
  - RPTA0039E
    Unknown host '%1'
  - RPTA0040E
    Unable to complete deployment to agents because of an unexpected error in the publish phase. %1
  - RPTA0041E
    %1
  - RPTA0042E
    Agent version %1 incompatible on host %2. Minimum agent version %3 required.
  - RPTA0043E
    Error encountered
  - RPTA0100W
    Failed to delete file %1
  - RPTA0518E
    An error has been encountered while launching the test. A required dataset %1 is missing or invalid in your project.
  - RPTC0003E
    Wrong type of project '%1'.
  - RPTC0004E
    Unable to access test variable initialization file. Make sure the specified file path is accessible: %1
  - RPTC0005E
    Error while processing XML file containing variable initializations. Make sure the file contains valid XML of the expected format: %1
  - RPTC0006E
    Error while gather test variable initializations. No variable initializations will be honored for this run.
  - RPTC0008I
    Setting Variable [name='%1', value='%2', source='%3', user group='%4', location='%5']
  - RPTC00020E
    Unexpected I/O error while communicating with workbench %1
  - RPTC1001W
    The file path specified for the Zip Utility is invalid.
  - RPTC1002W
    Could not get the classpath for project '%1'.
  - RPTC1009I
    Undefined
  - RPTC1011I
    %1: Request delivered
  - RPTC1012I
    %1: successfully added %2 to the configuration file
  - RPTC1013I
    %1: successfully removed %2 from the configuration file
  - RPTC1014I
    %1: %2 is already in the configuration file
  - RPTC1015I
    %1: Request timed out
  - RPTC1016I
    %1: Agent not ready
  - RPTC1017I
    %1: Agent not known
  - RPTC1018I
    %1: Unknown host exception
  - RPTC1019I
    %1: %2
  - RPTC1020I
    License type: %1
  - RPTC1021I
    License valid: %1
  - RPTC1030E
    Unable to replace dataset '%1' with '%2': %3.
  - RPTC1031E
    The dataset '%1' doesn't exist.
  - RPTC1032E
    The dataset '%1' is incompatible with existing dataset '%2'.
  - RPTE0005W
    Unable to attach requirements report into RQM result, because the default requirements report has been deleted. You can recreate the default reports by click restore defaults button on the Default Reports preference page.
  - RPTE0011W
    Unexpected error while releasing system resources for test log export. This may cause an increased memory footprint, until HCL OneTest™ Performance is restarted.
  - RPTE0147E
    The password saved for an encrypted column in dataset "%1" was invalid. Set a new password in the Automation Security preference page.
  - RPTE0150E
    The feature %1 used in test %2 is not supported in the current installation/platform.
  - RPTH0130I
    No sample time closely matches request at time=%1
  - RPTH049E
    A statistical adapter is missing reference to the target result.
  - RPTI0069E
    Local on premise agent %1 not in contact with this workbench.
  - RPTI0070E
    See Error Log for more details.
  - RPTI0071I
    There was an error while updating the workspace after downloading remote files.
  - RPTI0072E
    Modify majordomo.config on %1 and configure it to poll this workbench.
  - RPTI0072I
    Remote Launch Status: %1
  - RPTI0073E
    Project is NULL
  - RPTI0074E
    Exception occurred while creating and unzipping project: %1
  - RPTI0075E
    Error running schedule. Could not find schedule %1 in project %2.
  - RPTI0110I
    Provision time (MM:SS): %1
  - RPTI0111I
    Launch time (MM:SS): %1
  - RPTI0112I
    Execution time (MM:SS): %1
  - RPTI0113I
    Results transfer time (MM:SS): %1
  - RPTI0141E
    ------------------------------------\nError Dialog\n%1: %2\nConsult workspace error log ({workspace}/.metadata/.log) for further information.\n------------------------------------\n
  - RPTI0142E
    The Usage Metrics version %1 required by the licensed component %2 is not available.
  - RPTI0143E
    The licensing system failed to return Usage Metrics enablement for component %1.
  - RPTI0144W
    No RTCP instance is available to report Usage Metrics. No Usage Metrics will be reported for this execution.
  - RPTI0145E
    No RTCP instance is available to report Usage Metrics. Per license policy, execution cannot happen unless a RTCP is defined and running.
  - RPTI0146E
    TPTP Datapools and Datasets cannot coexist in the same test. Test run aborted.
  - RPTJ0063E
    An IOException was encountered while creating the Annotation File on Driver: %1
  - RPTJ0075E
    An IOException was encountered while creating the Execution Log File on Driver: %1 :: %2
  - RPTJ1002E
    Driver %1 returned an unrecognized response: %2. The last command sent was: %3
  - RPTJ1003E
    While waiting for an acknowledgement from the Driver, an unrecognized response was received.
  - RPTJ1004E
    The workbench was waiting for an Acknowledgement from the __VENDOR_NAME__ Agent Controller on Driver %1 and none was received.
  - RPTJ1005E
    Error while processing a message from the __VENDOR_NAME__ Agent Controller.
  - RPTJ1006E
    Execution failure. No status received from location %1 in %2 seconds. Workbench memory usage at %3 percent of the configured JVM heap. Possible location or workbench overload. For more information, see the Troubleshooting section of the online help.
  - RPTJ1007E
    The Driver: %1 has encountered a communication error. Please refer to Problem Determination Log for more details. For more information, see the Troubleshooting section of the online help.
  - RPTJ1008E
    The Driver: %1 has become unresponsive, possibly due to an out-of-memory condition. At last notification this Driver was using %2 percent of its allocated memory. Please refer to the "Increasing memory allocation" Help topic for information on how to increase memory allocation. For more information, see the Troubleshooting section of the online help.
  - RPTJ1009E
    The Driver: %1 is running %2, however the user selected %3 as the Drivers operating system.
  - RPTJ1010E
    Error while transferring file on Driver: %1. Transfer FROM: %3 TO: %2
  - RPTJ1011E
    The '%1' Protocol/Feature is not supported on the %2 platform, so the Test %3 can't be executed on location %4. For more information, see the Troubleshooting section of the online help.
  - RPTJ1012E
    The operating system (%1) for location %2 is not recognized. Please use an operating system that matches or begins with the name of one of the recognized platforms: %3
  - RPTJ1013E
    No valid license key for %1 Protocol/Feature found. The Test %3 cannot be executed. For more information, see the Troubleshooting section of the online help.
  - RPTJ1015E
    The specified operating system (%1) for location %2 is inconsistent with the actual platform (%3) running at that location. Please update the operating system to match and then try again. For more information, see the Troubleshooting section of the online help.
  - RPTJ1016E
    After deploying File: %2 to Driver: %1, %3 Byte(s) where found on the socket. Please refer to the Problem Determination Log for more details.
  - RPTJ1017E
    An IOException ocurred while deploying File: %2 to Driver: %1. Please refer to the Problem Determination Log for more details.
  - RPTJ1018E
    A SocketException ocurred while deploying File: %2 to Driver: %1. Please refer to the Problem Determination Log for more details.
  - RPTJ1019E
    An UnsupportedEncodingException ocurred while deploying File: %2 to Driver: %1 Please refer to the Problem Determination Log for more details.
  - RPTJ1020E
    An IOException ocurred while deploying File: %2 to Driver: %1.\nA possible cause is that the __VENDOR_NAME__ Agent Controller was started by a non-root user. \nThe Agent Controller needs to be started by the root user.
  - RPTJ1021E
    An InactiveAgentException has occurred while deploying to Driver: %1. Please refer to the Problem Determination Log for more details. For more information, see the Troubleshooting section of the online help.
  - RPTJ0121I
    Send RATEGENERATORS to: %1, string '%2'
  - RPTJ1022E
    The workbench received notification that the execution process on Driver %1 has terminated.
  - RPTJ1023E
    Communication with Driver %1 has been lost, possibly due to an out-of-memory condition. At last notification this Driver was using %2 percent of its allocated memory. Please refer to the "Increasing memory allocation" Help topic for information on how to increase memory allocation. For more information, see the Troubleshooting section of the online help.
  - RPTJ1024E
    Error during initialization of annotation transfer progress listener.
  - RPTJ1025I
    Run Completed (%1)
  - RPTJ1026I
    Run Terminated (%1)
  - RPTJ1030E
    Non-fatal internal exception occurred during code generation optimization. Code generation will not use meta-cache.
  - RPTJ1041E
    The '%1' Protocol/Feature is disabled due to a licensing configuration error.
  - RPTJ1042E
    %1 Failure checking out license for '%2' Protocol/Feature and %3 virtual users. The Test %4 cannot be executed.
  - RPTJ1043E
    %1 The '%2' Protocol/Feature is not supported on the %3 platform, so the Test %4 can't be executed on location %5.
  - RPTJ1044E
    Timed out after %1 seconds while waiting for the license server. Ensure that network connectivity to the license server exists and that the license server is running. For more information, see the Troubleshooting section of the online help.
  - RPTJ1100I
    A hang has been avoided during execution history receipt with %1 by a forceful load test executor state change
  - RPTJ1101E
    A session on driver %1 did not release promptly. Please check the agent controller.
  - RPTJ1102W
    The testLog event loader thread in the workbench has ended before processing all testLog events from %1. The testLog may be incomplete.
  - RPTJ1103W
    The test executor for %1 has been artificially set to HISTORY_COMPLETE because the testLog event loader thread is not longer running.
  - RPTJ1104E
    Remote debug never received event %1, process exit value %2
  - RPTJ1141E
    Temporary dataset file %1 not created.
  - RPTJ1142E
    Temporary dataset data are not generated: %1
  - RPTJ1200W
    Failed to delete file %1
  - RPTJ1220E
    An InactiveAgentException has occurred attempting to send [%1] to driver %2
  - RPTJ1221E
    The CommandHandler for %1 has encountered an exception while processing %2
  - RPTJ1240E
    Driver %1 has reported a NOK. The last command sent to that driver was: %2
  - RPTJ1241E
    Driver %1 has reported a NOK with the message: %2. The last command sent to that driver was: %3
  - RPTJ1242E
    Driver %1 has reported a %2 status
  - RPTJ1244E
    The AgentCommandListener for %1 has encountered an exception while processing %2
  - RPTJ1245E
    Driver %1 has reported that it is no longer receiving messages from the workbench. The previous message received from this driver, %2 milliseconds ago, was %3. At present no commands have been sent to this driver.
  - RPTJ1261E
    The ResponseHandler for %1 has encountered an exception while processing %2
  - RPTJ1270E
    Failure attempting to launch test execution.
  - RPTJ1271E
    The process executing the test has ended unexpectedly.
  - RPTJ1280E
    The communication path for returning test results from %1 has not been established. Check network connectivity between that machine and the workbench including any firewalls.
  - RPTJ1400I
    %1% %2/%3 files %4/%5 bytes deployed
  - RPTK0000I
    %1
  - RPTK1001E
    __PT_ACRONYM__ has detected the presence of an invalid Virtual Tester license key. If you have recently upgraded __PT_ACRONYM__, note that this is a new check performed by release 7.0.1 or later, and instructions for replacing invalid Virtual Tester license keys should have already been sent to you. You must replace all invalid Virtual Tester license keys before __PT_ACRONYM__ will allow execution of a schedule run that requires a Virtual Tester license. If you need further assistance, please contact your __VENDOR_NAME__ sales representative or Technical Support to replace the invalid Virtual Tester license key(s).
  - RPTK1016E
    The specified license server's version level is not compatible with this version of __PT_ACRONYM__.
  - RPTK1019E
    Unable to verify system time.
  - RPTK1020E
    Unable to locate license directory.
  - RPTK1021E
    License has expired.
  - RPTK1022E
    Invalid license file.
  - RPTK1023E
    Unable to find a license supporting %1 virtual users.
  - RPTL0001W
    Unable to retrieve data from the test.
  - RPTL0002W
    Failed to store test data into annotations.
  - RPTL0003W
    Failed to attach the annotation to the test.
  - RPTL0004W
    Unable to open test annotation to read data.
  - RPTL0005W
    Failed to create a temporary file to save test data.
  - RPTL0006W
    Failed to load test. Path %1 is invalid.
  - RPTL0007W
    Failed adding element from an un-registered feature %1.
  - RPTL0008E
    Cannot load a test created by a future version %1. Please upgrade your install.
  - RPTL0009I
    Test %1 is of an older version %2.
  - RPTL0010E
    Error creating metadata cache.
  - RPTL0011E
    Error reading metadata cache for %1.
  - RPTR0000W
    %1
  - RPTR0001W
    Failed to add annotation to execution history for file %1
  - RPTR0002W
    Unexpected error in data validity check of LoadTimeEObjectConsumer
  - RPTR0003W
    Failed to add properties to parent id %1
  - RPTR0004W
    Failed to delete temp file %1
  - RPTR2001E
    Unexpected exception in container complete loader. Heap growth likely.
  - RPTR2003W
    Execution Variables - Output
  - RPTS1000E
    Unable to start the agent communication service because of an error: %1. RPT will not be able to execute schedules.
  - RPTS1002E
    RPT is unable to execute a schedule because one of the ports(%1) it uses to communicate with the agents has been taken by another RPT(or other server) process. Ensure only one RPT instance is running.
  - RPTS1510E
    Unable to stop the agent communication service because of an error: %1
  - RPTS1001I
    Agent communication service listening on ports(%1)
  - RPTX0001E
    The combination of transformer and feature you have selected is invalid. Transformer (%1) was not expecting data type (%2).
  - RPTX0002E
    The combination of feature and transformer you have selected is invalid. Feature (%1) was not expecting data type (%2) to be returned by transformer (%3).
  - RPTX0003E
    Transformer (%1) has experienced a fatal error. Additional information (%2).
  - RPTX0004E
    Feature (%1) has experienced a fatal error. Additional information (%2).
  - RPTX0005E
    No class can be found for the specified transformer id (%1). Please check to make sure you have installed this transformer.
  - RPTX0006E
    Class definition missing. Please add jar that contains definition of (%1) to the classpath of the test project.
  - RPTX0007E
    The transformation raised a GWT serialization exception: %1
  - RPTX0008E
    The Silverlight decoder raised an exception: %1
  - RPTX0009E
    The Silverlight encoder raised an exception: %1
  - RPTX0010E
    The GraniteDS transformer made an error when encoding or decoding: %1
  - RPXD0022W
    The time to extract references seems excessive. It was %1 milliseconds.
  - RPXE0061I
    Loop iteration started late by %1 millseconds
  - RPXE5502E
    An exception occurred while logging an event to Jaeger.
  - RPTX1010I
    Start of OT-Performance project resolve. Repository=<%1>, Bootstrap=<%2>
  - RPTX1011I
    Attempting to resolve asset=<%1>
  - RPTX1012I
    End of OT-Performance project resolve. No detected errors
  - RPTX1017I
    Downloaded asset %1 from remote repository, local asset created.
  - RPTX1018I
    Using local cached version of asset %1.
  - RPTX1019I
    OT-Performance testsuite=<%1> found the following dependencies=<%2>
  - RPTX1081E
    Exception occurred while uploading Mobile report.
  - RPTX1082E
    An error occurred when generating the HTML/zip report.
  - RPTX2001E
    Adapter unable to start test because __PT_ACRONYM__ is already executing a test.
  - RPTX2002E
    Error encountered parsing RQM adapter preferences: %1. Please enter proper credentials in the Eclipse Quality Adapter preference page (Windows->Preferences).
  - RPTX2003E
    Project <%1> could not be found during RQM import.
  - RPTX2004E
    Test log is unavailable, no test results returned to RQM.
  - RPTX2005E
    Statistics log is unavailable, no statistic results returned to RQM: %1
  - RPTX2006W
    Display unavailable, no __PT_ACRONYM__ HTML reports will be attached to RQM execution results.
  - RPTX2007I
    Start RQM Execution Request Project=%1 Name=%2
  - RPTX2008I
    Start RQM Import Request Project=%1
  - RPTX2009I
    End RQM Execution Request
  - RPTX2010I
    End RQM Import Request
  - RPTX2011E
    Unable to interpret RQM configuration file %1. If file was hand edited make sure parameters are the correct format. If you are unable to get this file into the correct format, please erase and re-configure.
  - RPTX2012E
    Invalid RQM connection parameter: %1. Adapter was not launched.
  - RPTX2013E
    Adapter was stopped while a test was executing. The results of this test may be unreliable.
  - RPTX2014E
    Adapter was stopped while preparing to run an RQM script. There are no results for the attempted test script run.
  - RPTX2015E
    Testsuite '%1' or project '%2' does not exist. Ensure workspace started by adapter contains project and testsuite.
  - RPTX2016I
    %1
  - RPTX2017E
    %1 Reason: %2
  - RPTX2018W
    %1
  - RPTX2019I
    The RQM Adapter has been disconnected.
  - RPTX2020I
    The RQM Adapter has stopped.
  - RPTX2021E
    Unexpected error occurred while executing RQM test script.
  - RPTX2022E
    Unexpected error occurred while processing an import request from RQM.
  - RPTX2023W
    Error occurred while update the run status back to the RQM server. This may cause the RQM test progress page to contain inaccurate data.
  - RPTX2024E
    Unable to attach the following file to the RQM results. This may cause the attached HTML report not to render correctly. File name: %1
  - RPTX2025E
    Error occurred while registering the adapter: %1.
  - RPTX2026E
    Error occurred setting the default adapter name. Please set the name in the Eclipse Quality Adapter preference page (Windows->Preferences).
  - RPTX2027W
    Multiple test runs were detected when the stop request was received from RQM.
  - RPTX2029W
    Was unable to perform stop request from RQM. Likely the run was already shutting down when the request came in.
  - RPTX2030I
    Request to stop the test is being delayed until the appropriate run state is reached.
  - RPTX2031I
    A request to stop the currently running test has been received by RQM.
  - RPTX2032I
    Successfully issue a stop command to the running test. Please wait for the test to end.
  - RPTX2033E
    Error attempting to stop a test.
  - RPTX2034E
    Unable to create directory %1 no further information. Ensure user has permission to create directory in that location.
  - RPTX2035E
    Error occurred while attempting to automatically update pre-8.0 asset %1 for RQM execution.
  - RPTX2036E
    RQM remote resource access is not supported for pre-8.0 SOA assets. Please update your entire SOA project to 8.0 or greater before sharing.
  - RPTX2037E
    Launch was aborted: %1
  - RPTX2050E
    Unable to download remote asset %1 into local workspace. Remote repository %2. Ensure RQM system has connectivity to the remote repository and the file exists.
  - RPTX2051E
    Unable to browse %1 in remote repository %2. Ensure RQM system has connectivity to the remote repository and the directory exists.
  - RPTX2055E
    Error occurred reading the adapter connection file.
  - RPTX2056E
    Error occurred saving the adapter connection file.
  - RPTX2057E
    Unable to complete import operation because the specified path is not in the adapters workspace. Try specifying the only the project name.
  - RPTX2058E
    The specified script <%1> is not in the workspace currently being used by the adapter. You can only execute scripts which are in the adapters workspace.
  - RPTX2060E
    The script path specified by RQM does not seem to be valid. Please ensure the RQM test script has a script path which contains the project and script name.
  - RPTX2061W
    Run verdict is inconclusive because no performance requirements exist in the last user stage for the associated VU Schedule.
  - RPTX2062W
    Run verdict is inconclusive because there are zero performance requirements in the last user stage of the associated VU Schedule.
  - RPTX2063W
    No time range was generated for the user stage of the associated VU Schedule. Performance requirements reported to RQM will be based on the default time range.
  - RPTX2070E
    Error occurred while setting the RQM project area. Make sure a valid project area is specified on the Quality Manager Adapter preference page. The adapter is attempting to connect to RQM using the default project area.
  - RPTX2071E
    Error occurred while retrieving list of project areas. Please verify Quality Manager connection information. See error log for more details.
  - RPTX2072E
    Error occurred calling for the web analytics dash-board link.
  - RPTX2073E
    Error occurred while translating RQM server execution variables to __PT_ACRONYM__.
  - RPTX2074E
    Error connecting OT-Performance adapter and successful connecting OT-Performance adapter. This suggest RQM does not support OT-Performance script type introduced in 4.0.3. If OT-Performance adapter is not required it can get disabled by adding -DrtwStartAdapter=false in eclipse.ini.
  - RPTX2075E
    Unable to interpret expression <%1> from RQM control file <%2>. Ignoring. Reason <%3>
  - RPTX2077E
    Unable to browse to <%1>. Make sure it exist on the shared location.
  - RPWF0011E
    Error occurred while completing test generation
  - RPWF0012E
    Error occurred while processing a packet at test generation
  - RPWF0021E
    WSDL Exception raised while processing WSDL source
  - RPWF0032E
    Error while generating test from Axis recording
  - RPWF0051E
    Error occurred while setting classpath entry for recorder
  - RPWF0052E
    I/O exception occurred while resolving keystore or truststore path
  - RPWF0056E
    Error occurred while launching web services HTTP proxy
  - RPWF0066E
    Error occurred while launching axis client recorder agent
  - RPWF0071E
    Exception thrown while creating a wizard page control
  - RPWF0072E
    Exception thrown while parsing URL: %1
  - RPWF0074E
    Exception thrown while finishing the axis recording wizard
  - RPWF0075E
    Exception thrown while looking for an available port
  - RPWF0076W
    Exception thrown while adding SOA Tester certificate to the trustore %1
  - RPWF0081W
    A proxy authorization %1 is used without any proxy
  - RPWF0082W
    No free name can be found; reusing %1
  - RPWF0083E
    Resource file %1 not found in workspace %2
  - RPWF0084E
    Workspace location cannot be determined
  - RPWF0085E
    Cannot retrieve the operation name from the envelope %1
  - RPWF0101E
    Core exception thrown using org.eclipse.debug.core plugin
  - RPWF0102E
    Exception thrown during launch configuration update
  - RPWF0103E
    Exception thrown while resolving a bundle entry path
  - RPWF0104E
    Exception thrown while identifying localhost IP address
  - RPWF0111E
    Exception thrown while creating a substitution: %1
  - RPWF0112E
    Exception thrown while creating a reference: %1
  - RPWF0121W
    Unknown format. Skipping the test generation for: %1
  - RPWF0122W
    Skipped call: %1
  - RPWF0123W
    Skipped request: It could be that provided password was not ok
  - RPWF0124W
    Attachments not generated.
  - RPWF0130W
    Could not find project for URI: %1
  - RPWF0131W
    Loading XSD Schema failed: %1
  - RPWF0132E
    Error while generating test from Generic Service Client: Can't show wizard
  - RPWF0140E
    An error has occurred: %1
  - RPWH0007W
    Unhandled Security Algorithm '%1'
  - RPWH0009W
    Unable to serialize data
  - RPWH0010W
    Unable to deserialize data
  - RPWH0012E
    Unable to open editor for '%1'
  - RPWH0014E
    Parse Error in '%1'
  - RPWH0015E
    Unable to create resource '%1'
  - RPWH0016E
    Failed to export source text '%1'
  - RPWH0017E
    A connection error occurred on '%1', please check the URL or the network configuration
  - RPWS0001E
    Exception raised during data harvest execution
  - RPWS0002E
    Exception raised during data substitution execution
  - RPWS0003E
    Exception raised on harvest data management
  - RPWS0004E
    Exception raised on substitution data management
  - RPWS0005E
    Exception raised during WebSocket read action
  - RPWS0006E
    Exception raised during WebSocket write action
  - RPWS0007E
    Unable to get WebSocket connection
  - RPWS0008E
    Unable to read from a closed connection
  - RPWY0002E
    An exception occurred in %1
  - RPWY0003I
    Information: %1 (%2)
  - RPWY0004W
    Warning: %1 (%2)
  - RPWY0005E
    An error occurred while importing external schema %1
  - RPWY0006E
    Unable to correlate automatically
  - RPWY0007E
    An exception %1 occurred in %2
  - RPWZI0002E
    Exception raised during WebSocket connection creation.
  - RPXD0001E
    Unknown Segment Offset/Length for Segmented Dataset: %1
  - RPXD0002E
    Bad Dataset Mode: %1
  - RPXD0003E
    Dataset not initialized: %1
  - RPXD0004E
    End of non-wrapped dataset reached: %1
  - RPXD0005E
    Dataset with multiple Equivalence Classes cannot be segmented
  - RPXD0006E
    segmented DatapoolMap null: %1
  - RPXD0007F
    No registered data correlation handler for this IKAction
  - RPXD0017W
    Pattern matching failed for: regex (%1) str (%2)
  - RPXD0018E
    Skipping substitution, reference value was null. original string: (%1) offset: (%2)
  - RPXD0019E
    Data Correlation: Failed Substitution\nReference[%1]\nSubstitution[%2]\n\nDetails:\n\nA failed reference occurred in a prior request. Since the reference named [%3] was null, we were unable to substitute a new value for the substituter named [%4], original string [%5] at offset [%6] and this request may have failed. Please inspect prior requests for the reference failure and corrective guidance to avoid this in the future.\n\nFor more information search the help for the data correlation topics.
  - RPXD0020E
    Data Correlation: Failed Extraction\nReference[%1]\n\nDetails:\n\nWe were unable to extract the value for the reference named [%2], with the regular expression [%3]. This could mean a later request will fail. Please compare the response in the test log to the corresponding response in the test to look for differences that could cause this failure. These differences are often due to problems with the request and may be caused by missing or incorrect correlations.\n\nFor more information search the help for the data correlation topics.
  - RPXD0021E
    Dataset %1 is accessed using different dataset modes by different tests.
  - RPXD0021W
    Setting variable %1 to value %2.
  - RPXE0001W
    %1
  - RPXE0010W
    Engine shutdown problem joining workers
  - RPXE0011W
    Failed to report exception
  - RPXE0012W
    Schedule failed to load
  - RPXE0013W
    Unable to create test
  - RPXE0014W
    Setting log level to %1
  - RPXE0015W
    Attempt to add object to Schedule which is not a UserGroup
  - RPXE0016W
    Virtual User %1 experienced error %2
  - RPXE0017W
    Connect timeout for action %1 (%2) user %3
  - RPXE0018W
    Read timeout for action %1 (%2) user %3
  - RPXE0019W
    Connect exception for action %1 (%2) user %3
  - RPXE0021W
    Read exception for action %1 (%2) user %3
  - RPXE0023W
    Iterating over keys exception
  - RPXE0024W
    CancelledKeyException
  - RPXE0025W
    NullPointerException
  - RPXE0027W
    UserGroup exception
  - RPXE0028W
    User Group %1 does not implement createTesterWorkload()
  - RPXE0029W
    Worker caught throwable
  - RPXE0030W
    Connection leak, I/O state %1
  - RPXE0031W
    Exception finishing connection for action %1 (%2) user %3
  - RPXE0033W
    Finish read get buffer interrupted for action %1 (%2) user %3
  - RPXE0035W
    Finish read exception for action %1 (%2) user %3
  - RPXE0036W
    Engine thread startup exception
  - RPXE0037W
    Engine request to report exception
  - RPXE0038W
    Exception creating cache file, cacheFileName: %1, extension: %2, dir: %3
  - RPXE0039W
    User %1 experienced exception %2
  - RPXE0040W
    User %1 caught exception trying to report severe error.
  - RPXE0041W
    Engine hard stop after %1 second timeout
  - RPXE0042I
    %1 received request to stop
  - RPXE0043I
    Forced stop of action %1
  - RPXE0044W
    No IP address was found for the local host
  - RPXE0045W
    Ignoring invalid network interface %1
  - RPXE0046W
    Could not find any usable network interfaces
  - RPXE0047E
    SyncPointSubsystem Unknown sync point: %1
  - RPXE0048W
    %1 STOPUSERS users=%2 stagger=%3 timelimit=%4 active users=%5
  - RPXE0049W
    %1 had %2 non-sampled users asked to stop active users=%3
  - RPXE0050W
    %1 had %2 sampled users asked to stop
  - RPXE0051W
    %1 after wait for compliance active users=%2 target=%3
  - RPXE0052W
    %1 abandon user %2
  - RPXE0053W
    %1 abandoned %2 users
  - RPXE0054W
    %1 end stop %2 users SUCCESS active users=%3
  - RPXE0055W
    %1 end stop %2 users FAIL active users=%3
  - RPXE0056W
    %1 occurred in %2. Message: %3
  - RPXE0057E
    Exception while reading test variable initialization file: %1
  - RPXE0058E
    Exception while initializing virtual users test variables.
  - RPXE0059E
    Unable to get Kerberos ticket from KDC for server %1.
  - RPXE0060E
    Failed to load test from '%1' due to exception: %2
  - RPXE0100W
    %1 terminated due to exception: %2
  - RPXE0102W
    IKAction: %1 (%2) caught Exception in preFinish() for %3 (%4)
  - RPXE0103W
    IKAction: %1 (%2) caught Exception in postFinish() for %3 (%4)
  - RPXE0104W
    KernelChannel connect(), exception while trying to bind to local address %1: %2
  - RPXE2501E
    An error occurred while attempting to handshake with the server using protocol %1 and cipher suite %2. This type of failure is often related to a mismatch between the requested protocol or cipher suite and the ones the server is expecting or may be related to a server's request for a client digital certificate. If the server is configured to accept only 256-bit ciphers, contact __VENDOR_NAME__ Support for information on US export restrictions related to the exportation of strong encryption. Playback of tests utilizing these ciphers is not supported.
  - RPXE2550E
    The digital certificate RCS file '%1' was not found or was corrupt: %2
  - RPXE2552I
    digital certificate alias
  - RPXE2900E
    The server rejected the client's digital certificate.
  - RPXE2901W
    The server closed the connection abruptly. This is probably due to an overloaded server or to a problem negotiating a digital certificate or cipher suite. Check the web server's SSL error log for more details.
  - RPXE4000W
    Schedule or Test not found. May not have compiled. - %1
  - RPXE4001E
    Runner Exception occurred
  - RPXE4002E
    Communications Error: Invalid Logging Level
  - RPXE4003E
    Communications Error: Invalid TestLog Level for %1 events
  - RPXE4004E
    Communications Error: Invalid Statistics Level or Interval
  - RPXE4005E
    Runner Exception occurred - See problem determination log
  - RPXE4006E
    Communications Error: Invalid Dataset information
  - RPXE4007E
    Communications Error: No communication from the workbench in %1 milliseconds. For more information, see the Troubleshooting section of the online help.
  - RPXE4008E
    Attempt to change statistic interval ignored.
  - RPXE4008I
    Think: requested time %1 milliseconds, actual time %2 milliseconds
  - RPXE4009I
    Delay: requested time %1 milliseconds, actual time %2 milliseconds
  - RPXE4010I
    Schedule completed. See Performance Report, Verification Points Report, and/or Percentile Report to further evaluate the results of this run according to your success criteria.
  - RPXE4011E
    Communications Error: Invalid Stop timeout
  - RPXE4013I
    Additional events from %1
  - RPXE4014E
    Communications Error: Invalid RunStagger information for %1 (pairCount)
  - RPXE4015E
    Communications Error: Invalid RunStagger information for %1 (pair %2)
  - RPXE4016E
    Failed to start users for user group: %1.
  - RPXE4017I
    Additional execution history events from %1 are available, but they have been stored separately upon user request. See file %2. Refer to the most current version of the product release notes for information on how to access and view them.
  - RPXE4018E
    Failed to write message to workbench [%1]
  - RPXE4019E
    Failed to remove users for user group: %1.
  - RPXE4020E
    Failed to add users for userGroup: %1 numUsers=[%2] startId=[%3]
  - RPXE4021E
    Failed to add users because the runner is not in a runnable state.
  - RPXE4022E
    failed to add desired number of users
  - RPXE4023E
    failed to reach target number of users ramping down
  - RPXE4024E
    not runnable or command failed
  - RPXE4025E
    failed to set the DataView state of user %1[%2] to %3.
  - RPXE4026E
    DataView command %1 is not yet implemented.
  - RPXE4027E
    DataView command %1 is not recognized.
  - RPXE4028E
    MessageEventFilter command parsing error in token %1[%2] of command [%3]
  - RPXE4029E
    The testLog message event filter specified by [%1] cannot be constructed. This filter element will be ignored.
  - RPXE4050I
    Operating System Info: name [%1] architecture [%2] version [%3]
  - RPXE4100W
    Cannot open execution history cache file [%1], execution history will not be cached
  - RPXE4101E
    Error closing execution history cache file [%1]
  - RPXE4102E
    Error reading %1 bytes from execution history cache file [%1]
  - RPXE4103E
    Error writing %1 bytes to execution history cache file [%2]
  - RPXE4104E
    Error opening execution history cache file [%1] for reading
  - RPXE4105E
    Error testing execution history cache file [%1] for available input
  - RPXE4106E
    Unexpected EOF reading %1 bytes from execution history cache file [%2]
  - RPXE4107E
    Exception processing execution history event
  - RPXE4108E
    Error reading execution history cache file [%1]
  - RPXE4109E
    Error writing to TestLog cache file [%1]
  - RPXE4110E
    Error closing TestLog cache file [%1]
  - RPXE4111W
    Cannot open testLog cache file [%1] for random access writing, the testLog may contain bad data.
  - RPXE4112W
    Error removing testLog event from cache file [%1]. Writing %2 bytes at offset %3.
  - RPXE4120E
    Error writing to TestLog [%1]
  - RPXE4150E
    Error opening execution history annotation file [%1]
  - RPXE4151E
    Error writing %1 bytes to execution history annotation file [%2]
  - RPXE4152E
    Error flushing/closing history annotation file [%1]
  - RPXE4153E
    Error deleting history annotation file [%1]
  - RPXE4200W
    Warning: Statistics delivery thread running behind statistics interval by %1 milliseconds
  - RPXE4201W
    Warning: Statistics delivery thread over slept by %1 milliseconds
  - RPXE4202E
    Error: Statistics delivery thread over slept by %1 milliseconds
  - RPXE4203E
    Error: Statistics collection time too long: %1 bytes %2 milliseconds
  - RPXE4204W
    Warning: Statistics collection time too long: %1 bytes %2 milliseconds
  - RPXE4205E
    Error: Statistics write time too long: %1 bytes %2 milliseconds
  - RPXE4208E
    Error: Could not create agent measurements file %1.
  - RPXE4209I
    Error: Statistics collection thread was interrupted
  - RPXE4210E
    Error: A severe error occurred when processing statistics.
  - RPXE4211E
    Error: A severe error occurred when sending statistics.
  - RPXE4212E
    Error: A severe error occurred when closing statistics.
  - RPXE4213E
    Statistics sub-system error: %1
  - RPXE4214W
    Statistics sub-system warning: %1
  - RPXE4215E
    Statistical counter descriptors file not found: %1.
  - RPXE4215I
    Statistics sub-system message: %1
  - RPXE4216E
    Problem in statistical counter descriptors file: %1.
  - RPXE4217E
    Submitted value %1 is out of range of allowed values for the counter type %2.
  - RPXE4218E
    In order to use this method, the runtime type of the counter must be either STATIC or RATE.
  - RPXE4219E
    Mismatch between runtime type %1 and static counter type %2.
  - RPXE4220E
    No static declaration found for counter %1.
  - RPXE4221E
    Attempt to create an undeclared counter %1 (type %2) over a declared counter of a different type (%3).
  - RPXE4900I
    Test execution completed with no reported problems
  - RPXE4901I
    %1 ERROR verdicts reported
  - RPXE4902I
    %1 FAIL verdicts reported
  - RPXE4903I
    %1 INCONCLUSIVE verdicts reported
  - RPXE4904I
    All reported verdicts PASSed
  - RPXE4905I
    %1 ERROR verdict reported
  - RPXE4906I
    %1 FAIL verdict reported
  - RPXE4907I
    %1 INCONCLUSIVE verdict reported
  - RPXE4908I
    %1 FAIL verdict roll-up
  - RPXE4909I
    %1 ERROR verdict roll-up
  - RPXE4910I
    %1 INCONCLUSIVE verdict roll-up
  - RPXE4911I
    %1 PASS verdict roll-up
  - RPXE4912I
    %1 ERROR verdicts reported from driver %2
  - RPXE4913I
    %1 FAIL verdicts reported from driver %2
  - RPXE4914I
    %1 INCONCLUSIVE verdicts reported from driver %2
  - RPXE4915I
    %1 ERROR verdict reported from driver %2
  - RPXE4916I
    %1 FAIL verdict reported from driver %2
  - RPXE4917I
    %1 INCONCLUSIVE verdict reported from driver %2
  - RPXE4918I
    duration
  - RPXE4920I
    %1 was successfully invoked. This does not indicate the pass/fail verdict of the test itself, only that the invocation of the test was successful. Expand to inspect verdicts.
  - RPXE4921I
    %1 was invoked. This does not indicate the pass/fail verdict of the test itself, only that the invocation of the test was successful. No verdicts will be reported from the test.
  - RPXE4930I
    The %1 testLog level was pushed from %2%3 to %4%5.
  - RPXE4931I
    The %1 testLog level was popped from %2%3 to %4%5.
  - RPXE4932I
    The %1 testLog level was changed from %2%3 to %4%5.
  - RPXE4940I
    Transaction [%1] started %2 milliseconds after start of test run.
  - RPXE4941I
    Transaction [%1] stopped %2 milliseconds after start of test run. Elapsed time: %3 milliseconds.
  - RPXE4942I
    Transaction [%1] aborted.
  - RPXE4944W
    Transaction [%1] is already started.
  - RPXE4945W
    Transaction [%1] has not been started.
  - RPXE4948W
    Execution Variables - Input
  - RPXE4950I
    Null user group name.
  - RPXE4952E
    Unable to find target loop named '%1'. Error handler did not complete properly.
  - RPXE5301E
    Error encountered while loading Native Library: %1
  - RPXE5305E
    A required customer-supplied file was not found. Please check the "external_files" folder and your installation instructions for: %1
  - RPXE5330E
    Unable to apply dataset swap: %1
  - RPXE5500W
    Unable to apply Open Tracing context. The root Jaeger span will be unparented. %1
  - RPXE5501W
    Transaction times for this run do not include failing transactions, according to workbench Test Execution preferences.
  - RRIT0001E
    Environment variable INTEGRATION_TESTER_AGENT_HOME not set to HCL OneTest™ API Agent installation location, or does not contain expected RunTests(.exe) program.
  - RRIT0002E
    Error unzipping __IT_PRODUCT_NAME__ project.
  - RRIT0003E
    __IT_PRODUCT_NAME__ library not found.
  - RRIT0004E
    Error processing messages received form the __IT_PRODUCT_NAME__ client.
  - RRIT0005E
    Some tag values are missing.
  - RRITUI1002W
    Open __IT_PRODUCT_NAME__ resources has been disabled in Test > __IT_PRODUCT_ACRONYM__ Integration preferences
  - DCRC0001E
    Missing message for log entry '{0}' in class: {1}
  - DCRC0002E
    Cannot get Log key '{0}': SecurityException raised
  - DCRC0003E
    Cannot initialize Log key '{0}'
  - DCRC0008W
    Warning: field '{0}' is not defined in class: {1}
  - DCRC0009W
    Warning: cannot get check message versus log key mapping for '{0}' of class {1}, SecurityException raised
  - DCRC0010E
    Unexpected exception, please check Error Log view: {0}
  - DCUI0001E
    unexpected exception
  - DCUI0003E
    Error getting persistent property '{0}'
  - DCUI0004E
    Error setting persistent property '{0}'
  - DCUI0006E
    Cannot reload resource '{0}'
  - DCUI0007W
    Failed to encode model to clipboard.
  - DCUI0008W
    Failed to decode model from clipboard.
  - DCUI0009E
    None of the attribute providers own attribute id '{0}'.
  - DCUI0010E
    Missing IRuleUIProvider extension point for '{0}'
  - DCUI0011E
    Missing IConditionUIProvider extension point for '{0}'
  - DCUI0012E
    Cannot save editor '{0}'
  - DCUI0013E
    Missing IRulePassUIProvider extension point for '{0}'
  - DCUI0014E
    Missing IRuleArgumentUIProvider extension point for '{0}'
  - DCUI0015E
    Missing IRuleArgumentContainerUIProvider extension point for '{0}'
  - DCUI0016E
    Try rule failed
  - DCUI0017E
    Try rule failed: '{0}'
  - DCUI0998E
    Cannot load file '{0}'
- Additional error messages
  You can find the additional error messages.

RPTX2023W

Error occurred while update the run status back to the RQM server. This may cause the RQM test progress page to contain inaccurate data.