HFMCA000
Z Data Tools ended
Z Data Tools for CICS has ended.
If Z Data Tools for CICS has ended unexpectedly, refer to output in the job that was submitted to start the Z Data Tools batch address space for further information.
HFMCA001
Password required
A password was not entered for the specified userid.
Enter the current password for the specified userid in the Password field.
HFMCA002
Confirm new password
The new password entered for the specified userid requires confirmation.
Re-enter the new password for the specified userid in the New Password field.
HFMCA003
Re-enter new password
An error occurred while processing the new password.
Re-enter the new password for the specified userid in the New Password field.
HFMCA004
Invalid password
An invalid or unauthorized password has been entered for the specified userid.
Enter the current password for the specified userid in the Password field.
HFMCA005
Password has expired
The current password for the specified userid has expired.
Enter a new password for the specified userid in the New Password field.
HFMCA006
Invalid new password
The new password entered for the specified userid does not meet your system's password requirements.
Enter an acceptable new password for the specified userid in the New Password field.
HFMCA007
Userid is revoked
The specified userid is revoked.
Contact your security administrator to determine why the specified userid is revoked.
HFMCA008
Procedure name required
The Procedure input field has been left blank.
Specify a valid 1–8 character Z Data Tools procedure name in the Procedure input field. Refer to Z Data Tools Customization Guide for further information.
HFMCA009
Profile data set name required
The Profile data set input field has been left blank.
Specify a valid 1–44 character profile data set name in the Profile data set input field. Refer to Z Data Tools Customization Guide for further information.
HFMCA010
Invalid profile data set name
The data set name entered in the Profile data set input field does not follow standard MVS data set naming conventions.
Specify a valid 1–44 character profile data set name in the Profile data set input field. Refer to Z Data Tools Customization Guide for further information.
HFMCA011
Jobcard required
The first line of the Jobcard input field has been left blank. It must contain a valid jobname along with the JOB JCL statement.
Specify a valid jobcard in the Jobcard input field. Refer to Z Data Tools Customization Guide for further information.
HFMCA012
Jobname requires //
A non-comment line in the jobcard specified in the Jobcard input field does not begin with "//".
Follow JCL conventions by specifying // at the beginning of each non-comment line in the Jobcard input field.
HFMCA013
Invalid jobname
The jobname specified in the Jobcard input field does not follow JCL conventions.
Specify a valid jobname on the first line of the Jobcard input field.
HFMCA014
Jobname too long
The jobname specified in the Jobcard input field exceeds 8 characters.
Specify a valid jobname on the first line of the Jobcard input field.
HFMCA015
Invalid jobcard, JOB statement required
The first line specified in the Jobcard input field does not contain the required JOB JCL statement.
Specify a valid jobcard in the Jobcard input field. Refer to Z Data Tools Customization Guide for further information.
HFMCA016
Job jobname not responding
Job jobname has been submitted to start the Z Data Tools address space, but a response has not been received within the allocated amount of time. The job may be queued or may have failed. This message is accompanied by message HFMCA019.
Refer to the output of job jobname for any further error messages that may indicate why the job has not responded.
If the job log cannot be found (the ZDT/CICS job was never started), verify that the HFMRDR DD statement has been properly defined in the CICS startup JCL and your system has sufficient initiators. Refer to the Z Data Tools Customization Guide for further information.
- Insufficient authority to access one of the libraries in the ZDT/CICS procedure. Check the system log for security messages.
- TCP/IP is not active on the CICS region. Check for TCP/IP error messages in the job log and verify that TCP/IP is active on the CICS region.
- Duplicate job name. Verify if another user may have specified the same job name in the ZDT/CICS jobcard input field, or a previous ZDT/CICS job is still active.
HFMCA017
Job jobname submitted
Job jobname has been submitted to start the Z Data Tools address space.
None.
HFMCA018
Profile READ error, COND: cond, RESP2: resp2
Z Data Tools has encountered an error while attempting to read from the profile data set. CICS has returned a condition of cond and a resp2 value of resp2. This profile data set is used to populate the ZDT/CICS logon screen. ZDT/CICS default values have been used instead.
Look up the condition and resp2 values in CICS Application Programming Reference for the READ FILE API for further information.
HFMCA019
Press F5 to wait another 20 seconds, ENTER to resubmit
Z Data Tools has submitted a batch job to start the Z Data Tools address space but has not received a response. The job may be queued, or may have failed. This message is accompanied by message HFMCA016.
Press F5 to wait another 20 seconds for a response from the batch job or ENTER to resubmit the batch job. Refer to the output in the job displayed in message HFMCA016 for any further error messages that may indicate why the job has not responded.
HFMCA020
Sockets error
Z Data Tools has encountered an error with the TCP/IP sockets interface. This message is accompanied by message HFMCA021.
Look up the error code for the function displayed in message HFMCA021 in IP CICS Sockets Guide for further information.
HFMCA021
FUNCTION: function, ERROR CODE: error_code, RETURN CODE: return_code
Z Data Tools has encountered an error with the TCP/IP sockets interface when issuing a call to the listed function. This message is accompanied by message HFMCA020.
Look up the error code for the listed sockets function in IP CICS Sockets Guide for further information.
HFMCA022
Internal reader error, RESOURCE: resource, FUNCTION: function
Z Data Tools has encountered an error while processing the internal reader. Z Data Tools uses the internal reader to submit a batch job that invokes the Z Data Tools address space. The function is the operation Z Data Tools attempted to perform against the internal reader. The resource is the name of the transient data queue defined to the internal reader used by the OPEN, WRITE, and CLOSE functions. For ENQ and DEQ functions, resource is the enqueue resource name used by Z Data Tools. This message is accompanied by message HFMCA023 that contains the returned condition and resp2 values.
Look up the condition and error code displayed in message HFMCA023 for the listed function in CICS Application Programming Reference for further information.
HFMCA023
COND: condition, RESP2: resp2
Z Data Tools has encountered an error while processing the internal reader. The condition and resp2 values returned by CICS are displayed. This message is accompanied by message HFMCA022 that contains the resource name and function that encountered the error.
Look up the condition and error code for the function listed in message HFMCA022 in CICS Application Programming Reference for further information.
HFMCA024
Internal reader incorrectly defined, RESOURCE: resource
The transient data queue resource is incorrectly defined to the internal reader. Z Data Tools uses the internal reader to submit a batch job that invokes the Z Data Tools address space.
Correctly define a transient data queue to the internal reader. Refer to Z Data Tools Customization Guide for further information.
HFMCA025
Password successfully changed
The password has been successfully changed for the specified userid.
None.
HFMCA026
Unknown return code in ESMRESP from external security manager
A CICS request to verify the entered password for the specified userid has returned an unknown return code in ESMRESP from the external security manager.
Contact your security administrator.
HFMCA027
The CICS external security manager interface is not initialized
A CICS request to verify the entered password for the specified userid has returned an error condition indicating that the CICS external security manager interface is not initialized.
Contact your security administrator.
HFMCA028
The external security manager is not responding
A CICS request to verify the entered password for the specified userid has returned an error condition indicating that the CICS external security manager interface is not responding.
Contact your security administrator.
HFMCA029
The USERID field contains a blank character in an invalid position
A CICS request to verify the entered password for the specified userid has returned an error condition indicating that the userid field contains a blank character in an invalid position.
Specify a valid userid or contact your security administrator.
HFMCA030
Unknown INVREQ value when validating password
A CICS request to verify the entered password for the specified userid has returned an unknown INVREQ resp2 value.
Contact HCL Support.
HFMCA031
The USERID is not known to the external security manager
A CICS request to verify the entered password for the specified userid has returned an error condition indicating that the specified userid is not known to the external security manager.
Specify a valid userid or contact your security administrator.
HFMCA032
Unknown condition received from password validation
A CICS request to verify the entered password for the specified userid has returned an unknown condition.
Contact HCL Support.
HFMCA033
Abend during job submission
An abend was encountered when Z Data Tools attempted to submit a batch job to the internal reader to start the Z Data Tools address space.
Refer to the CICS and system log for further information about the cause of the abend.
HFMCA034
The change password request failed during SECLABEL processing
A CICS request to change the password for the specified userid has returned an error condition indicating that the change password request failed during SECLABEL processing.
Contact your security administrator.
HFMCA035
The user is revoked in the connection to the default group
A CICS request to change the password for the specified userid has returned an error condition indicating that the user is revoked in the connection to the default group.
Contact your security administrator.
HFMCA036
NOTAUTH condition received from change password request
A CICS request to change the password for the specified userid has returned an error condition indicating that the user is not authorized.
Contact your security administrator.
HFMCA037
**** Z Data Tools for CICS has ended ****
Z Data Tools for CICS has ended.
None.
HFMCA038
Invalid userid, re-enter
You have entered an invalid userid. The userid either contains incorrect characters or is not recognized by the external security manager.
Enter a valid userid.
HFMCA039
Userid not authorized to issue INQUIRE command
CICS command security has prevented your userid from issuing INQUIRE commands on the CICS region. Your userid must have the authority to issue INQUIRE commands to run ZDT/CICS.
Contact your security administrator.
HFMCA040
Connection tdqueue error, RESOURCE: resource, FUNCTION: function
Z Data Tools has encountered an error while processing the connection transient data queue. Z Data Tools reads this queue (if specified) to obtain a list of APPLIDs of connected CICS regions where ZDT/CICS has been installed to process remote resources. The function is the operation Z Data Tools attempted to perform against the queue. The resource is the name of the transient data queue defined to ZDT/CICS on the CONN option in HFM3POPT.
Look up the condition and error code displayed in message HFMCA023 for the listed function in CICS Application Programming Reference for further information.
HFMCA041
Connection tdqueue incorrectly defined, RESOURCE: resource
The connection transient data queue is incorrectly defined. Z Data Tools reads this queue (if specified) to obtain a list of APPLIDs of connected CICS regions where ZDT/CICS has been installed to process remote resources. The resource is the name of the transient data queue defined to ZDT/CICS on the CONN option in HFM3POPT. This resource must be defined as an extrapartition, input tdqueue with a record length no larger than 80 bytes.
Correctly define the connection transient data queue. Refer to Z Data Tools Customization Guide for further information.
HFMCA042
Trace requested, message log error, RESOURCE: resource, FUNCTION function
You have requested ZDT/CICS tracing, but and error was encountered with the transient data queue defined as the ZDT/CICS message log. ZDT/CICS tracing writes data to the message log, and therefore ZDT/CICS cannot perform tracing until the error with this resource has been resolved. The function is the operation Z Data Tools attempted to perform against the queue. The resource is the name of the transient data queue defined to ZDT/CICS as the message log on the MSGL option in HFM3POPT. Refer to the Z Data Tools Customization Guide for further details about the ZDT/CICS message log.
Look up the condition and error code displayed in message HFMCA0023 for the listed function in CICS Application Programming Reference for further information.
HFMCA043
CICS socket interface abend, interface may not be started
Issue the EZAO CICS transaction (if available) to view the status and start the CICS socket interface, then rerun the ZDT/CICS transaction.
HFMCA065
hh:mm:ss.ms trace message
Various tracing information as requested during ZDT/CICS initialization.
None.
HFMC999
Z Data Tools/CICS problem - message nnnn not found in table
Z Data Tools for CICS cannot find the message number nnnn in the message table. This is probably a Z Data Tools error.
Contact HCL Support.
HFMCA060
mm/dd/yy hh:mm:ss Z Data Tools for CICS started by USER: userid, FACILITY: facility
A ZDT/CICS session has been started on the CICS region at the specified date and time. The ZDT/CICS transaction was initiated by the listed userid and facility. This facility will also be written in all subsequent messages written to the message log during this ZDT/CICS session.
None.
HFMCA061
mm/dd/yy hh:mm:ss Z Data Tools for CICS ended, USER: userid, FACILITY: facility, RC: rc
A ZDT/CICS session has ended on the CICS region at the specified date and time with return code rc. The ZDT/CICS transaction was originally initiated by the listed userid and facility.
If the return code is not 0, refer to previous messages for an explanation of the errors encountered.
HFMCA062
mm/dd/yy hh:mm:ss Failure loading options module, COND: condition, RESP2: resp2, FACILITY: facility
ZDT/CICS was unable to load the options module HFM3POPT. When attempting to load the program, CICS returned the listed condition and resp2 values.
If your installation accepted the ZDT/CICS default values and therefore did not define and install the options module, ignore this message. Otherwise, look up the condition and resp2 values in the CICS Application Programming Reference for the LOAD PROGRAM API for further information. Refer to the Z Data Tools Customization Guide for further information about the options module HFM3POPT.
HFMCA063
mm/dd/yy hh:mm:ss Failure loading message module, COND: condition, RESP2: resp2, FACILITY: facility
A language other than ENGLISH was specified in the ZDT/CICS options module. However, ZDT/CICS was unable to load the message module for the specified language.
Look up the condition and resp2 values in the CICS Application Programming Reference for the LOAD PROGRAM API for further information. Refer to the Z Data Tools Customization Guide for further information about multicultural support.
HFMCA064
mm/dd/yy hh:mm:ss Failure starting verify transaction, COND: condition, RESP2: resp2, FACILITY: facility
ZDT/CICS attempted to start a transaction to verify that the entered userid is valid. The transaction failed with the listed condition and resp2 values. The default ZDT/CICS verification transaction is HFMV, but this may have been changed in the options module during installation.
Look up the condition and resp2 values in the CICS Application Programming Reference for the START API for further information. Refer to the Z Data Tools Customization Guide for further information about the userid verification transaction (HFMV).