EQQG001 - EQQG109

EQQG001I

SUBTASK SUBTASK HAS STARTED

The subtask SUBTASK has been successfully initialized.

Processing for the indicated subtask is started.

None.

EQQG002E

INITIALIZATION OF SUBTASK SUBTASK FAILED. REASON CODE: RS

The indicated subtask could not acquire all the resources needed for normal operation.

Processing continues but no requests from the dialog or the program interface for HCL Workload Automation for Z can be served.

Correct errors shown by the earlier messages and restart the subtask indicated.

Review earlier messages in the HCL Workload Automation for Z message log to determine the cause of the error.

The message variable RS can have the following values:

02: The main task, the normal mode manager, is unavailable.
11: The application description file is unavailable.
12: The workstation description file is unavailable.
13: The calendar file is unavailable.
14: The period file is unavailable.
15: The all workstations closed record is unavailable.
16: The operator instruction file is unavailable.
17: The JCL variables file is unavailable.
18: The resource description file is unavailable.
19: The ETT criteria file is unavailable.
21: End-to-end input/output queue file is unavailable.
22: End-to-end input/output queue file initialization failed.

EQQG003I

SUBTASK SUBTASK HAS ENDED

This message is issued when the HCL Workload Automation for Z subsystem is being stopped by an operator command.

HCL Workload Automation for Z termination processing continues.

None.

EQQG004E

SUBTASK SUBTASK ABENDED, IT IS RESTARTED AT RETRYAT

A serious error caused the SUBTASK subtask to end abnormally. SUBTASK has been able to restart, at RETRYAT.

SUBTASK resumes normal processing, but one or more requests for service may have been rejected. The dialog user requesting service may or may not be informed about the completion or termination of the requests. A dump is created. Message EQQX271E, when issued, informs the dialog user that the request has failed due to a serious error in SUBTASK. If the subtask is GENERAL SERVICE, the dialog user must press attention to break the request.

Collect relevant information about the sequence of events leading to this error, make the dump data set and the message log available for inspection. If the problem persists, search the IBM Support database for a solution at Support. If you do not find any information, for the information to collect, see the Diagnosis Guide and Reference manual, Chapter 3. Problem analysis procedures, section "Information needed for all problems, sub-section "Information to collect for general service problems". Search the IBM Support database for a solution at Support.

Inform the system programmer about the error and, (if the error can be reproduced), of the sequence of dialog requests leading to the error.

Review the dump data set to determine what caused the problem.

EQQG005E

VALIDATION FAILED FOR FILE: FILE, REASON: REASON, OFFSET: POS

The record that was to be written to the HCL Workload Automation for Z database was rejected because it was incorrect.

No update to the database is made.

If you cannot find a valid reason for the error, make the dump data set (ddname EQQDUMP) and the message log available for inspection. If the problem persists, search the IBM Support database for a solution at Support. If you do not find any information, for the information to collect, see the Diagnosis Guide and Reference manual, Chapter 3. Problem analysis procedures, section "Information needed for all problems, sub-section "Information to collect for general service problems". Search the IBM Support database for a solution at Support.

Look in the dump data set (ddname EQQDUMP) for further information about the error. This data set contains the record and the position of the error. If you cannot find a valid reason for the error, contact your system programmer.

FILE gives the database on which the update was attempted, REASON indicates the reason for the failure, and POS indicates the failing position in hexadecimal form within the record.

See Reason codes for a list of the reason codes and their meanings.

EQQG006I

THE FUNC FUNCTION IS ACTION BY USER

This message confirms and logs some action taken to an HCL Workload Automation for Z function. Ensure that your license is valid, otherwise jobs submission on z-centric and dynamic agents is not allowed.

FUNC is either AUTOMATIC JOB RECOVERY or JOB SUBMISSION. ACTION is either ACTIVATED or DEACTIVATED. USER is the user ID of the user who requested the function. The message confirms that the dialog request has been successfully accomplished.

Processing continues.

In EQQMLOG check if message EQQZ820W has been issued, in which case the jobs submission on z-centric and dynamic agents is not allowed. To detect if there are problems with your license, in EQQMLOG search for messages EQQZ81* and identify the error to correct.

EQQG007E

THE LEVEL OF EQQMINOx IS NOT THE SAME AS THE LEVEL OF GENERAL SERVICE

The version of the module EQQMINOx is not the correct version to handle the data communication between the Controller and user address space.

The system proceeds with the next request.

Ensure that the EQQMINOx program is of the same level as the EQQGSBEX module. EQQMINOx is accessed by the dialog user and Program Interface programs. EQQGSBEX is accessed by the Controller.

None.

EQQG008W

THE REQUEST FAILED, GENERAL SERVICE QUEUING PROBLEM, REASON: XSSRS

The request was rejected because of an interface problem in the General Service function.

The system waits for you to respond.

Correct the General Service error given in the HCL Workload Automation for Z message log.

Try again. If the error persists, contact your system programmer.

Review the HCL Workload Automation for Z message log for errors related to General Service to determine the cause of the error.

EQQG009W

INSUFFICIENT VIRTUAL STORAGE FOR THE COMPLETE LIST, REASON: XSSRS

The requested list could not be displayed because the amount of virtual storage in the dialog address space was not sufficient. There is a limit of 16MB on all data transfers.

A partial list is displayed, or no list at all.

If this is a request from a dialog function in which a selection criterion can be specified, change the selection criterion to select fewer items. Increase the region size at TSO logon.

EQQG010I

GENERAL SERVICE REQUEST STATISTICS FOLLOW: TYPE TOTAL NEWRQS TOTTIME NEWTIME TOTAVG NEWAVG

This message is issued if the GENERAL SERVICE task statistics are active. Do this either by specifying the STATMSG(GENSERV) keyword in the JTOPTS initialization statement or with the modify command, /F subsys,GENSTA=ON.

If any requests have been processed, this message is issued every n minutes, where n is either the value specified in the JTOPTS keyword STATIM, if it has a nonzero value, or the default of 30.

It consists of column headers defining the values of the EQQG011I message following.

The following column headers are defined:

TYPE: The request for which data was gathered.
TOTAL: The total number of requests of this type.
NEWRQS: The number of requests of this type since the last message.
TOTTIME: The total time, in seconds, used to process this request.
NEWTIME: The total time, in seconds, used to process this request since the last message.
TOTAVG: The average time, in seconds, used to process a request of this type.
NEWAVG: The average time, in seconds, used to process a request of this type since the last message.

The value in the TYPE column is one of the following resources:

ALL: Total line for all resources
AD: Application description
AR: Automatic recovery
PERI: Calendar periods
CALE: Calendar
CRIJ: Critical job
CRDP: Dependency job on a critical path
WSCL: All workstations closed
WSD: Workstation description
LTPS: Long-term plan
PLAN: Long-term plan status
WS: Current plan workstation status
WSRL: Current plan workstation status requested from the ready list
RL: Current plan ready list
OPER: Current plan operation
OPRL: Current plan operation requested from the ready list
PREP: Preparation CPU operations
DEPC: Dependency operation
R3P: Current plan operation record
C3C: Current plan occurrences
C3CR: Current plan occurrences requested from the ready list
CP_G: Current plan general
JCL: JCL Repository record
JSUB: Job submission
JCLA: Automatic JCL preparation
JCLP: Promptable JCL variables
JCLT: JCL tailoring
JVAR: Tailoring session
JV: JCL variable table
RACF: Refresh RACF resources
SRES: Special resources
ETT: Event-triggered tracking
OI: Operator instruction
STAT: HCL Workload Automation for Z status record
MCP: Modify current plan
DEP: Successor candidates
CATM: Restart and cleanup
OTHR: All other resources

Normal HCL Workload Automation for Z processing continues.

None.

EQQG011I

TYPENUMRQNEWRQTTOT TNEWTAVGNAVG

This message is issued if the GENERAL SERVICE task statistics are active. This can be done either by specifying the STATMSG(GENSERV) keyword in the JTOPTS initialization statement or with the modify command, /F subsys,GENSTA=ON.

If any requests have been processed, this message is issued every n minutes, where n is either the value specified in the JTOPTS keyword STATIM, if it has a nonzero value, or the default of 30.

In the message text shown above:

nnnnn: A 5-digit number.
secs: The number of seconds.

The message contains data about how the general service subtask processed requests for one resource. See the description of message EQQG010I for an explanation of what the data values mean.

Normal HCL Workload Automation for Z processing continues.

None.

EQQG012I

GENERAL SERVICE QUEUE STATISTICS FOLLOW: TYPE TOTAL Q1 Q2 Q5 Q10 Q20 Q50 Q100 >100

If any requests have been processed, this message is issued every n minutes, where n is either the value specified in the JTOPTS keyword STATIM, if it has a nonzero value, or the default of 30.

The message shows the size and delay of the General Service queue since the message was last issued.

The value below the TYPE heading can be either QUEUE SIZE or QUEUE DELAY. The value below the TOTAL heading gives the total number of times that the General Service queue was emptied. The values below the Qx headings give the number of times that either the length of the queue or the time spent waiting for General Service processing, was in a particular interval. For example, Q20 on the queue size line gives the number of times that the queue size was between 11 and 20 requests.

Normal HCL Workload Automation for Z processing continues.

None.

EQQG013I

TYPETOTSZQ1Q2Q3 Q4Q5Q6Q7Q8

If any requests have been processed, this message is issued every n minutes, where n is either the value specified in the JTOPTS keyword STATIM, if it has a nonzero value, or the default of 30.

In the message text shown above:

nnnnn: A 5-digit number.

This message contains data about the General Service queue size. See the description of message EQQG012I for an explanation of what the data values mean.

Normal HCL Workload Automation for Z processing continues.

None.

EQQG014W

REQUEST TERMINATED BECAUSE TIME LIMIT IS EXCEEDED

A general service request has terminated because the requesting process: a program interface (PIF) program or a dialog user, did not respond within 10 minutes.

Processing continues.

None.

EQQG015W

REQUEST TERMINATED - REQUESTOR NO LONGER CONNECTED

A general service request was terminated because the requesting process: a program interface (PIF) program or a dialog user, is no longer connected to the general service subtask. The connection can be lost if the requestor is canceled, or if a dialog user presses the ATTN (attention) key, after a request for service has been sent to the controller and before a response has been received.

Processing continues.

None.

EQQG016E

MORE THAN 40 DEPENDENCIES DEFINED FOR OPERATION OPN IN APPLICATION APPL. THE IA IS IA

The request to update the current plan failed because the general service task detected more than 40 dependencies defined for the operation. A dependency can be:

A predecessor operation
One or more special resources required by the operation. In this case, one dependency has to be considered regardless of the number of required resources

The request is rejected and no update is made.

Decrease the number of dependencies specified for the reported operation and repeat the request.

EQQG017W

THE FOLLOWING DEPENDENCIES WERE REMOVED AND AFFECTED CRITICAL PATHS MUST BE RECALCULATED:ADID IADATE IATM WSD OPNO JOBNM

Modifying the current plan has caused the deletion of one or more dependencies belonging to critical paths. As a consequence, all the involved critical paths need to be recalculated. HCL Workload Automation for Z does not update critical paths during plan execution.

This message is stored in the controller EQQMLOG data set. It is the header for message EQQG018 and indicates:

Application definition ID
Input arrival date
Input arrival time
Workstation definition ID
Operation number
Job name

None.

Recalculate the critical paths by running a batch daily planning replan.

EQQG018W

FIELD CRITICAL HAS BEEN SET TO NEWCRT FOR OPERATION ADID IA WSID OPNUM JOBNAME BUT NO JOB TABLE DATA SPACE HAS BEEN ALLOCATED.

You changed to P the CRITICAL field for the operation indicated by the message variables, but the critical job table does not exist. The reason is that the last daily planning produced a plan containing no critical jobs. Therefore, the critical path handler task did not allocate the job table data space.

None.

Run a batch daily planning replan.

EQQG019I

THE FIELD CRITICAL WAS SET TONEWCRT FOR OPERATION ADID IA WSID OPNUM JOBNAME. AFFECTED CRITICAL PATHS WILL BE RECALCULATED.

Modifying the current plan has changed the value in the CRITICAL field for the job (either from P to another value or from another value to P). As a consequence, the scheduler automatically recalculates all the affected critical paths.

None.

EQQG100E

GDDM® COULD NOT BE LOADED

When requesting a graph, HCL Workload Automation for Z could not load GDDM*.

The graph request is ignored. Processing continues.

Make sure that the GDDM load library is part of ISPLLIB.

Contact your system programmer.

EQQG101E

CPATH DS NOT AVAIL

The data space for the critical path is not available. This occurred for either of the following reasons:

At the startup of the controller or extension of the current plan, there were no critical jobs.
The controller started with the CRITJOBS parameter in the OPCOPTS initialization statement set to No.

The request for the critical path is not satisfied because the critical path data space does not exist. The request is ignored.

Do one of the following:

Ensure the CRITJOBS parameter in the OPCOPTS initialization statement is set to Yes and restart the controller.
Run the daily plan batch using REPLAN or EXTEND to build the critical path data space.

EQQG101W

THE MAXIMUM NUMBER OF ROWS THAT CAN BE DISPLAYED HAS BEEN REACHED

The requested list cannot be displayed, because the ISPF TBADD function supports only 32767 rows.

A partial list of rows is displayed.

If you requested the list from a dialog where you can set a selection criterion, specify a selection criterion to select fewer items.

EQQG102E

CPATH DS NOT AVAIL

The data space for the critical path is not available. This occurs for either of the following reasons:

At the startup of the controller or extension of the current plan, there are no critical jobs.
The controller started with the CRITJOBS parameter, in the OPCOPTS initialization statement, set to No.

The request for the critical path is not satisfied because the critical path data space does not exist. The request is ignored.

Do one of the following:

Ensure the CRITJOBS parameter in the OPCOPTS initialization statement is set to Yes and restart the controller.
Run the daily plan batch using REPLAN or EXTEND to build the critical path data space.

EQQG104W

POSITION THE CURSOR ON AN ELEMENT IN THE GRAPHICAL AREA

A graph selection command has been given, but the cursor was not located in the graphical area.

The command is ignored. Processing continues.

Position the cursor in the graphical area at or close to the element to be selected and reissue the command.

EQQG105E

DUMMY NODES ARE NOT VALID, REPOSITION CURSOR

This node is a dummy node and as such has no data related to it.

The system waits for you to respond.

Specify another node for processing.

EQQG106I

THE SPECIFIED ATTRIBUTE MUST BE NUMERIC. SEE GDDM MANUALS

An invalid graphical attribute has been given.

The attribute panel is redisplayed and prompts you for a correct attribute value.

Correct the invalid attribute.

EQQG107I

THE GDDM IS NOT ALLOWED IN SPLIT SCREEN MODE

The GDDM is not allowed in split-screen mode.

The call to GDDM is disabled.

Set the screen in single-screen mode and repeat the command.

EQQG109E

NET LOADER MODULE COULD NOT BE LOADED

When requesting a graph, HCL Workload Automation for Z could not load the net building routine.

The graph request is ignored. Processing continues.

Make sure that the ISPLLIB libraries are updated to contain the graph net building routines. The name of the routine can be seen in the ISPF log. See message EQQX009.

Contact your system programmer.