EQQCL00 - EQQCLZ6

EQQCL00I

PROCESSING: INSTRUCTION

OCL is processing the INSTRUCTION instruction

Processing continues.

None.

EQQCL02X 

INSTR INSTRUCTION EXECUTED: RC=RETURN_CODE

This message reports the return code (RETURN_CODE) of the instruction. X can be one of the following:
I
Information (RC=0)
W
Warning (RC=4)
E
Error (RC=8)

The scheduler’s processing continues.

None.

EQQCL03I

TRUE CONDITION: IF EXPRESSION

An IF instruction was specified. OCL processed the instruction specified in the THEN clause.

The scheduler’s processing continues.

None.

EQQCL04I

TRUE CONDITION: ELSE EXPRESSION

An IF instruction was specified. OCL processed the instruction specified in the ELSE clause.

The scheduler’s processing continues.

None.

EQQCL05I

FALSE CONDITION: IF EXPRESSION

The condition specified in the IF instruction is false.

The scheduler’s processing continues.

Verify that the specified keywords are correct.

EQQCL06I

THE DEFAULT VALUE OF VARIABLE VARNAME WAS UPDATED

An UPD or SETUPD instruction was specified. The default value of the variable VARNAME was updated in the scheduler’s variable table specified by the INIT instruction.

The scheduler’s processing continues.

None.

EQQCL08I

OCCURRENCE APPL WAS COMPLETED

OCL processed a COMPL instruction that completed the occurrence APPL.

The scheduler’s processing continues.

None.

EQQCL09I

THE OPERATION WAS COMPLETED: OPNO(OPNUM) APPL(APPL) IA(IADT)

OCL completed the operation OPNUM within the occurrence APPL with the input arrival date and time IADT.

The scheduler’s processing continues.

None.

EQQCL0AI

THE OCCURRENCE WAS ADDED: APPL(APPL) IA(IADT)

OCL added a new occurrence in the scheduler’s current plan or long term plan. APPL is the occurrence ID and IADT is the input arrival date and time.

The scheduler’s processing continues.

None.

EQQCL0BI

A DELETE REQUEST WAS EXECUTED FOR APPLICATION APPL

OCL tried to add a new occurrence in the scheduler’s plan, but a problem occurred, so it issued a DELETE request for the application APPL.

The scheduler’s processing continues.

None.

EQQCL0CI

DEFAULT PREDECESSOR OPERATION IS USED: DEFPREOPNO

OCL defined DEFPREOPNO as an external predecessor of the operation to be modified.

The scheduler’s processing continues.

None.

EQQCL0DI

INTERNAL PREDECESSOR PREOPNUM DEFINED TO OPERATION OPNUM

A new internal predecessor was defined for operation OPNUM.

The scheduler’s processing continues.

None.

EQQCL0EI

APPL BELONGS TO GROUP APPLGRP

Application APPL is associated to the application group APPLGRP.

The scheduler’s processing continues.

None.

EQQCL0FI

THE OCCURRENCE WAS DELETED: APPL(APPL) IA(IADT)

The occurrence APPL was deleted from the scheduler’s current plan.

The scheduler’s processing continues.

None.

EQQCL0GI

THE OPERATION WAS DELETED: OPNO(OPNUM) APPL(APPL) IA(IADT)

The operation OPNUM was deleted from the occurrence APPL with the input arrival date and time IADT.

The scheduler’s processing continues.

None.

EQQCL0HI

OCCURRENCE FOUND IN LTP: APPL(APPL) IA(IADT)

OCL found an occurrence in the long term plan (LTP) that matches with the specified selection parameters.

The scheduler’s processing continues.

None.

EQQCL0II

DATE IS VALID

The input date is valid.

OCL calculates about 210 variables, based on the input date.

None.

EQQCL0JI

SEARCHING FOR OCCURRENCE APPL IN CP

OCL is searching the occurrence APPL in the scheduler’s current plan (CP).

The scheduler’s processing continues.

None.

EQQCL0KI

TOTAL NUMBER OF MATCHING OCCURRENCES: N_OCC

OCL found N_OCC occurrences in the scheduler’s current plan that match the specified selection parameters.

The scheduler’s processing continues.

None.

EQQCL0LI

OPER. IN ERROR: OPNUM APPL(APPL) IA(IADT) WS(WSNAME) ERR(ERR_CODE)

OCL found an ended-in-error operation with error code ERR_CODE.

The scheduler’s processing continues.

None.

EQQCL0MI

ERROR CODE ERR_CODE MATCHES ERR() FOR OPERATION OPNUM

This output message reports all the operations whose error code matches the value that the user specified in the ERR() parameter.

The scheduler’s processing continues.

None.

EQQCL0NI

REPLY TO WTOR WAS ISSUED

An operator replied to the WTO issued by OCL.

The scheduler’s processing continues.

None.

EQQCL0OI

OCCURRENCE FOUND: APPL(APPL) IA(IADT) STATUS(STATUS)

OCL found an occurrence in the current plan that matches the selection parameters.

The scheduler’s processing continues.

None.

EQQCL0PI

CMD COMMAND WAS ISSUED

OCL issued command CMD, which can be SRSTAT, OPSTAT, or WSSTAT.

The scheduler’s processing continues.

None.

EQQCL0QI

OPERATION OPNUM WAS SUCCESSFULLY MODIFIED

OCL modified the operation OPNUM.

The scheduler’s processing continues.

None.

EQQCL0RI

DELETING THE SPECIAL RESOURCE FROM OPERATION OPNUM

OCL is deleting the special resource definition from operation OPNUM.

The scheduler’s processing continues.

None.

EQQCL0SI

DELETING THE EXTERNAL PREDECESSOR(S) FROM OPERATION OPNUM

OCL is deleting the external predecessors from operation OPNUM.

The scheduler’s processing continues.

None.

EQQCL0TI

OPERATION STATUS WAS CHANGED TO 'R': OPNO(opnum)

OCL modified the status of operation OPNUM.

The scheduler’s processing continues.

None.

EQQCL0UI

EXTERNAL PREDECESSOR(S) WILL BE DELETED FROM OPERATION opnum

OCL deletes all the external predecessors from operation OPNUM.

The scheduler’s processing continues.

None.

EQQCL0VI

OCCURRENCE APPL IS NOW STARTED

OCL forced the occurrence appl to start.

The scheduler’s processing continues.

None.

EQQCL0WI

JOBNAME WAS CHANGED FOR OPERATION OPNUM

OCL changed the jobname for operation OPNUM.

The scheduler’s processing continues.

None.

EQQCL0XI

DEFAULT OPERATION NUMBER IS USED: DEFOPNO

OCL uses DEFOPNO as the default operation number.

The scheduler’s processing continues.

None.

EQQCL0YI

PREDECESSOR ADDED TO OPERATION OPNUM: PREOPNO(PREOPNUM) PREAPPL(PREAPPL)

OCL added a new predecessor to operation OPNUM. PREOPNUM is the predecessor operation, and PREAPPL is the predecessor application ID.

The scheduler’s processing continues.

None.

EQQCL0ZI

NEW DEPENDENCY CREATED FOR OCCURRENCE APPL: PREAPPL(PREAPPL)

OCL added a new predecessor to operation OPNUM. PREAPPL is the predecessor application ID.

The scheduler’s processing continues.

None.

EQQCL8EI

DUBPROC VALUE MUST BE Y OR N. VALUE N HAS BEEN ASSIGNED AS DEFAULT.

The value set for the DUBPROC keyword was not valid.

The DUBPROC keyword is assigned the default value N. OCL processing continues.

None.

EQQCL10I

PREDECESSOR DELETED: PREOPNO(PREOPNUM) PREAPPL(PREAPPL) PREIA(IADT)

OCL deleted a predecessor definition. PREOPNUM is the predecessor operation number, PREAPPL is the occurrence ID, and IADT is the input arrival date and time.

The scheduler’s processing continues.

None.

EQQCL11I

SPECIAL RESOURCE ADDED TO OPERATION OPNUM: RES_NAME

OCL added a new special resource definition to operation OPNUM. RES_NAME is the name of the special resource.

The scheduler’s processing continues.

None.

EQQCL12I

SPECIAL RESOURCE DELETED FROM OPERATION OPNUM: RES_NAME

OCL deleted a special resource definition from operation OPNUM RES_NAME is the name of the special resource.

The scheduler’s processing continues.

None.

EQQCL13I

SUCCESSOR RELEASED FROM OPERATION OPNUM: OPNO(S_OPNUM) APPL(APPL)

OCL deleted a successor dependency definition from operation OPNUM. S_OPNUM is the successor operation number, and APPL is the successor application ID.

The scheduler’s processing continues.

None.

EQQCL14I

OPERATION P_OPNUM WAS DEFINED AS AN INTERNAL PREDECESSOR OF OPERATION OPNUM

OCL added a new predecessor to operation OPNUM. P_OPNUM is the predecessor operation number.

The scheduler’s processing continues.

None.

EQQCL15I

INTERNAL SUCCESSOR RELEASED: OPNO(S_OPNUM) APPL(APPL)

OCL released the internal successor operation number S_OPNUM in the occurrence APPL.

The scheduler’s processing continues.

None.

EQQCL16I

EXTERNAL SUCCESSOR FOUND FOR OPERATION OPNUM: OPNO(S_OPNUM) APPL(APPL)

OCL found an external successor for operation OPNUM. S_OPNUM is the successor operation number; APPL is the successor occurrence ID.

The scheduler’s processing continues.

None.

EQQCL17I

INTERNAL SUCCESSOR FOUND FOR OPERATION OPNUM: OPNO(S_OPNUM)

OCL found an internal successor for operation OPNUM. S_OPNUM is the successor operation number.

The scheduler’s processing continues.

None.

EQQCL18I

EXTERNAL PREDECESSOR FOUND: PREAPPL(APPL) PREIA(IADT)

OCL found an external predecessor. APPL is the predecessor occurrence ID, and IADT is its input arrival date and time.

The scheduler’s processing continues.

None.

EQQCL19I

EXTERNAL PREDECESSOR FOUND: PREOPNO(OPNUM) PREAPPL(APPL) PREIA(IADT)

OCL found an external predecessor. OPNUM is the predecessor operation number, APPL is the predecessor occurrence ID and IADT is its input arrival date and time.

The scheduler’s processing continues.

None.

EQQCL1AI

N_OCC OCCURRENCES FOUND FOR APPLICATION APPL

OCL found N_OCC occurrences of application APPL in the current plan.

The scheduler’s processing continues.

None.

EQQCL1BI

OPERATION OPNUM WAS ADDED TO OCCURRENCE APPL WITH IA IADT

OCL added operation OPNUM to occurrence APPL.

The scheduler’s processing continues.

None.

EQQCL1CI

NUMBER OF NOT COMPLETED OCCURRENCES: N_OCC

OCL found N_OCC occurrences that are not in Complete status.

The scheduler’s processing continues.

None.

EQQCL1DI

EXTERNAL PREDECESSOR DELETED: PREAPPL(PREAPPL) PREIA(IADT)

OCL deleted an external predecessor definition. PREAPPL is the predecessor occurrence ID, and IADT its input arrival date and time.

The scheduler’s processing continues.

None.

EQQCL1EI

SPECIAL RESOURCE FOUND FOR OPERATION OPNUM: RES_NAME

OCL found a special resource defined to operation OPNUM. RES_NAME is the name of the special resource.

The scheduler’s processing continues.

None.

EQQCL3EI

EXTNAME ADDED TO OP OPNUM OF OCC APPL WITH IA IADT

OCL added extended name to operation OPNUM of occurrence APPL with input arrival time IADT.

The scheduler processing continues.

None.

EQQCL3LI

EXTNAME ADDED TO OP OPNUM OF OCC APPL WITH IA IADT

OCL added extended name to operation OPNUM of occurrence APPL with input arrival IADT.

The scheduler processing continues.

None.

EQQCL3MI

SA INFO UPDATED FOR OP OPNUM OF OCC APPL WITH IA IADATE IATIME

OCL updated the system automation information for operation OPNUM of occurrence APPL with input arrival IADATE IATIME with the new values specified.

The scheduler processing continues.

None.

EQQCL3NI

DEFAULT CONDITION ID IS USED: DEFCONDID

OCL uses DEFCONDID as the default condition ID.

The scheduler processing continues.

None.

EQQCL3OI

CONDITION XC ADDED TO OPERATION XO

OCL added a new condition to operation XO. XC is the condition ID.

The scheduler processing continues.

None.

EQQCL3PI

DEP. ADDED TO COND XC IN OP XO: PREOPNO(XPO) PREAPPL(XPA)

OCL added a condition dependency to condition XC in operation XO. XPO is the predecessor operation, and XPA is the predecessor application ID.

The scheduler processing continues.

None.

EQQCL3QI

CONDITION XC IN OPERATION XO WAS SUCCESSFULLY MODIFIED

OCL modified condition XC in operation XO.

The scheduler processing continues.

None.

EQQCL3RI

CONDITION XC IN OPERATION XO WAS SUCCESSFULLY DELETED

OCL deleted condition XC from operation XO.

The scheduler processing continues.

None.

EQQCL3SI

DEP. DELETED IN COND XC, OP XO : PREOPNO(XPO) PREAPPL(XPA)

OCL deleted a condition dependency from condition XC in operation XO. XPO is the predecessor operation, and XPA is the predecessor application ID.

The scheduler processing continues.

None.

EQQCL40W

THE ROUTINE RETURNED RESULT RETURN CODE

The value of RESULT is the return code of the routine. This message is issued when the return code is not zero.

If the return code issued by the called routine is higher than the highest return code of the other processed OCL instructions, it is assumed as the highest return code.

OCL processing continues.

None.

EQQCL41W

PROCESS TERMINATED DUE TO A LABEL INSTRUCTION - HIGHEST RC=LASTRC

OCL processed a LABEL instruction.

OCL processing is terminated with the highest return code of the processed OCL instructions.

None.

EQQCL42W

VARIABLE VARNAME WILL BE ADDED TO THE VARIABLE TABLE VARTAB

OCL processed an UPD or SETUPD instruction to modify the value of a variable that does not exist in the scheduler’s variable table.

OCL adds the variable VARNAME to the variable table VARTAB. OCL processing continues.

Verify that the variable name specified in the UPD or SETUPD instruction is correct.

EQQCL43W

NO OCCURRENCE TO COMPLETE: APPL

OCL processed a COMPL instruction for an application occurrence, but no occurrence in a noncomplete status was found in the current plan.

OCL processing continues.

Verify that the selection parameters for the application occurrence are correct.

EQQCL44W

OCCURRENCE NOT FOUND IN THE CURRENT PLAN: APPL(APPL) IA(IADT)

OCL attempted to modify or list the application occurrence APPL, which does not exist in the current plan. IADT is the input arrival date and time used to search for the occurrence.

OCL processing continues.

Verify that the selection parameters are correct.

EQQCL45W

OCCURRENCE NOT FOUND IN THE LTP: APPL(APPL) IA(IADT)

OCL attempted to modify or list the application occurrence APPL, which does not exist in the long term plan (LTP). IADT is the input arrival date and time used to search for the occurrence.

OCL processing continues.

Verify that the selection parameters are correct.

EQQCL46W

ONLY OCL INSTRUCTIONS ARE ACCEPTED: SYSIN_LINE

A non-OCL instructions was specified and the initialization parameter TSOCMD is set to NO.

OCL processing continues.

If you want to be able to specify TSO commands or REXX instructions other than those of OCL, set the TSOCMD parameter to YES.

EQQCL47W

OPER. NOT FOUND OR NOT IN ERROR: OPNUM APPL(APPL) IA(IADT)

The application occurrences APPL with input arrival date and time IADT does not contain the selected operation or the selected operation is not in error status.

OCL processing continues.

Verify that the selected operation really exists in the application occurrence.

EQQCL48W

ERROR CODE ERRCODE DOES NOT MATCH ERRCODE() FOR OPERATION OPNUM

ERRCODE is the error code specified in the CHKAPPL instruction for operation OPNUM. OCL found the operation OPNUM in error status, but its error code does not match ERRCODE.

OCL processing continues.

None.

EQQCL49W

OPERATION OPNUM IS NOT IN HOLD STATUS

OCL tried to release an operation that was not manually held.

OCL processing continues.

None.

EQQCL4AW

OPERATION OPNUM IS ALREADY IN HOLD STATUS

OCL tried to hold an operation that was already in HOLD status.

OCL processing continues.

None.

EQQCL4BW

OPERATION OPNUM IS NOT IN NOP STATUS

OCL issued an UNNOP command against an operation that was not in NOP status.

OCL processing continues.

None.

EQQCL4CW

OPERATION OPNUM IS ALREADY IN NOP STATUS

OCL issued a NOP command against an operation that was already in NOP status.

OCL processing continues.

None.

EQQCL4DW

EXTERNAL PREDECESSOR(S) FOUND, STATUS CANNOT BE CHANGED

OCL tried to set an operation to Ready status, but external predecessors are defined. OCL deletes the dependency definitions and tries to set the operation Ready again.

OCL processing continues.

None.

EQQCL4EW

OCCURRENCE APPL IS STILL IN WAITING STATUS

OCL tried to force the application occurrence to start, but it is still in Waiting status.

OCL processing continues.

Verify the conditions that cause the occurrence to wait. Check the current operation status and extended status, using the scheduler’s dialogs, to determine more precisely why the application occurrence failed to start.

EQQCL4FW

NO OPERATION FOUND TO BE CHANGED

OCL tried to change the jobname associated with an operation in the current plan, but the operation was not found.

OCL processing continues.

Verify that the selection parameters are correct.

EQQCL4GW

PREDECESSOR APPLICATION NOT FOUND IN CP: PREAPPL(PREAPPL) PREIA(PREIADT)

PREAPPL is the predecessor application ID and PREIADT is the input arrival date and time of the predecessor application. OCL tried to define PREAPPL as a predecessor of the application occurrence specified in the APPL() keyword, but PREAPPL is not present in the current plan.

OCL processing continues.

Verify that the selection parameters are correct.

EQQCL4HW

OPERATION OPNUM DOESN'T EXISTS

OCL tried to change or delete an operation that does not exist in the current plan.

OCL processing continues.

Verify that the specified keywords are correct.

EQQCL4IW

ALREADY PREDECESSOR: PREOPNUM

OCL tried to define a predecessor that is already defined.

OCL processing continues.

Verify that the specified keywords are correct.

EQQCL4JW

PREDECESSOR NOT FOUND IN THE LTP: PREAPPL(PREAPPL) PREIA(PREIADT)

OCL tried to define PREAPPL as a predecessor of the application occurrence specified in the APPL() keyword, but PREAPPL is not present in the long term plan (LTP).

OCL processing continues.

Verify the selection parameters.

EQQCL4KW

NO EXTERNAL SUCCESSOR FOUND FOR THE OCCURRENCE APPL

OCL tried to release the external successors of the occurrence APPL, but no successor was found for the occurrence.

OCL processing continues.

None.

EQQCL4LW

OPERATION OPNUM NOT FOUND: APPL(APPL) IA(IADT)

OCL tried to change operation OPNUM, which does not exist in the current plan.

OCL processing continues.

Verify the selection parameters.

EQQCL4MW

NO INTERNAL SUCCESSOR FOUND FOR OPERATION OPNUM OF THE OCCURRENCE APPL

OCL tried to release the internal successors of operation OPNUM, but no successor was found.

OCL processing continues.

Verify the selection parameters.

EQQCL4NW

NO EXTERNAL PREDECESSOR FOUND FOR THE OCCURRENCE APPL

OCL tried to release the external predecessors of occurrence APPL, but no predecessor is present in the current plan.

OCL processing continues.

Verify the selection parameters.

EQQCL4OW

NO SPECIAL RESOURCE FOUND

OCL tried to delete a special resource definition, but no special resource is defined to the operation.

OCL processing continues.

Verify the selection parameters.

EQQCL4PW

NO OPERATION WAS MODIFIED

OCL did not modify any operation in the occurrence.

OCL processing continues.

Verify the selection parameters.

EQQCL4QW

OPERATION OPNUM ALREADY EXISTS

OCL tried to add an operation that already exists in the occurrence.

OCL processing continues.

Verify the selection parameters.

EQQCL4RW

OPERATION DEADLINE LATER THAN OCCURRENCE DEADLINE - ACCEPTED: DEADLINE

The specified operation deadline is later than the occurrence deadline, but is accepted.

OCL processing continues.

Verify that the specified keywords are correct.

EQQCL4SW

OPERATION DEADLINE PRECEDES OPERATION INPUT ARRIVAL - ACCEPTED: DEADLINE

The operation deadline precedes the operation input arrival, but is accepted.

OCL processing continues.

Verify that the specified keywords are correct.

EQQCL4TW

OPERATION INPUT ARRIVAL PRECEDES OCCURRENCE - ACCEPTED: IADT

The operation input arrival precedes the occurrence input arrival, but is accepted.

OCL processing continues.

Verify that the specified keywords are correct.

EQQCL4UW

DEPENDENCY ALREADY DEFINED

OCL tried to define a predecessor that is already defined.

OCL processing continues.

Verify that the specified keywords are correct.

EQQCL4VW

NO PARAMETER WAS SPECIFIED

No parameter was specified for the MODOP instruction. No change is required for the operation.

OCL processing continues.

Verify the selection parameters.

EQQCL4WW

OCCURRENCE ALREADY IN COMPLETE STATUS: APPL WITH IA IADT

OCL tried to complete an occurrence that was already completed.

OCL processing continues.

Verify the selection parameters.

EQQCL4XW

OCCURRENCE NOT FOUND IN THE CURRENT PLAN: APPL(APPL)

No occurrence exists in the current plan for application APPL.

OCL processing continues.

Verify the selection parameters.

EQQCL4ZW

UNRESOLVED DEPENDENCY

OCL tried to resolve a dependency for an occurrence being added to the Long Term Plan (LTP). However, a predecessor could not be resolved because the predecessor application does not have an occurrence with an earlier start time or the same start time.

OCL processing continues.

Check the dependencies of the added occurrences.

EQQCL50E

NOT POSSIBLE TO READ THE OCL MLIB

OCL was not able to read the data set referenced by the OCLMLIB DD-card.

OCL processing is terminated.

Verify the data set name specified in the OCLMLIB DD-card.

EQQCL51E

NOT POSSIBLE TO READ THE OCL PARMLIB

OCL was not able to read the EQQYRPRM member in the OCL library.

OCL processing is terminated.

Verify the data set name specified in the OCLPARM ddname.

EQQCL52E

NOT POSSIBLE TO READ THE SYSIN CARD

OCL was not able to read the SYSIN DD-card.

OCL processing is terminated.

Verify the data set specified in the EQQOCL.SYSIN DD-card.

EQQCL53E

INVALID SYNTAX: INSTRUCTION

An invalid instruction was specified in the OCL SYSIN.

OCL terminates

Correct the instruction and resubmit the job.

EQQCL54E

NOT POSSIBLE TO WRITE THE CONTROL CARDS FOR EQQPIFT PROGRAM

OCL was not able to write the input control cards for the EQQPIFT program.

OCL terminates

Verify that the CARDIN card is correctly defined in the EQQYRPRC procedure. See the Developer's Guide for more information.

EQQCL55E

ERROR DURING THE GETMAIN REQUEST

OCL was not able to get the storage for the PIF session.

OCL processing is terminated.

Resubmit the job. If the problem persists, for the information to collect, see the Diagnosis Guide and Reference, "Problem analysis procedures" section.

EQQCL56E

PIF INITIALIZATION FAILED FOR SUBSYSTEM SUBSYS

OCL was not able to initialize the scheduler’s PIF session.

OCL processing is terminated.

Check the scheduler’s subsystem name specified in the PARMLIB SUBSYS() parameter or in the INIT instruction. If the subsystem name is correct and if the subsystem is active, contact IBM Software Support.

EQQCL57E

VARIABLE NAME IS MISSING

The variable name was not specified in the UPD or SETUPD instruction.

OCL processing is terminated.

Correct the instruction and resubmit the job

EQQCL58E

PIF TERM REQUEST FAILED

OCL was not able to terminate the scheduler’s PIF session.

OCL processing is terminated.

If the problem persists, for the information to collect, see the Diagnosis Guide and Reference, "Problem analysis procedures" section.

EQQCL59E

PIF TERM REQUEST FAILED: ERROR DURING FREEMAIN

OCL was not able to terminate the scheduler’s PIF session.

OCL processing is terminated.

If the problem persists, for the information to collect, see the Diagnosis Guide and Reference, "Problem analysis procedures" section.

EQQCL5AE

PREDECESSOR CAN'T BE EQUAL TO THE OPERATION TO BE ADDED

OCL was requested to add a new operation in an application occurrence, but the operation number is equal to its internal predecessor operation number.

OCL processing is terminated.

If you have specified the DEFOPNO initialization parameter, OCL uses it as a default predecessor operation number. You cannot add an operation with a number equal to DEFOPNO.

EQQCL5BE

NO CURRENT PLAN EXISTS

OCL cannot add or modify occurrences because the current plan does not exist.

OCL processing is terminated.

Extend the current plan and resubmit the job.

EQQCL5CE

NO DEFAULT VALUE FOR VARIABLE VARNAME

OCL did not find a value for variable VARNAME.

OCL processing is terminated.

Verify that a SET or SETUPD instruction was specified to set the variable value.

EQQCL5DE

INVALID OPERAND FOR THE PIF REQUEST: OPERAND

A PIF request contained an invalid operand.

OCL processing is terminated.

Verify that the length of operand is specified in the SETSTEMS subroutine in the OCL program.

EQQCL5EE

NOT POSSIBLE TO COMPLETE THE OCCURRENCE APPL WITH IA IADT

OCL was not able to complete the occurrence APPL.

OCL processing is terminated.

Verify that the specified occurrence Application Identifier, the Input Arrival Date and Time, and the occurrence status are correct and uniquely identify the occurrence. If not correct it and resubmit the job.

EQQCL5FE

NOT POSSIBLE TO MODIFY THE OCCURRENCE APPL WITH IA IADT

OCL was not able to modify the occurrence APPL in the current plan.

OCL processing is terminated.

Verify that the resource is not locked from another user and resubmit the job.

EQQCL5GE

CANNOT COMPLETE OPERATION OPNUM of occurrence appl with IA IADT

OCL was not able to complete the operation OPNUM in the occurrence APPL with input arrival time IADT.

OCL processing is terminated.

Verify if the operation has external predecessors.

EQQCL5HE

REQUIRED KEYWORD(S) MISSING

A required keyword was not specified in the instruction.

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL5IE

APPL AND GROUP ARE MUTUALLY EXCLUSIVE KEYWORDS

APPL and GROUP keywords were specified in the same ADD instruction.

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL5JE

SUBSYSTEM ID MUST BE SUPPLIED

The scheduler’s subsystem ID was not specified.

OCL processing is terminated.

Specify the subsystem ID in the SUBSYS initialization parameter (EQQYRPRM member in the OCL library) or in the INIT instruction.

EQQCL5KE

NO APPLICATION FOUND FOR THE GROUP APPLGRP

OCL tried to add the application group APPLGRP, but no application was defined to the group.

OCL processing is terminated.

Verify the application group ID.

EQQCL5LE

NOT POSSIBLE TO ADD THE OCCURRENCE APPL

OCL was not able to add the occurrence APPL.

OCL processing is terminated.

Verify that the specified occurrence Application Identifier, the Input Arrival Date and Time, and the occurrence status are correct and uniquely identify the occurrence. If not correct it and resubmit the job.

EQQCL5ME

NOT POSSIBLE TO USE AN IA DATE OTHER THAN THE ACTUAL DATE

OCL tried to add an occurrence in the current or long term plan. An occurrence with the same input arrival (IA) already existed, so OCL tried to increment the input arrival time by 1 minute. An error occurs if the occurrence input arrival time is 23:59.

OCL processing is terminated.

Specify an input arrival time other than 23:59 for the occurrence to be added.

EQQCL5NE

NOT POSSIBLE TO ADD THE OCCURRENCE WITH IA IADT

OCL was not able to add the occurrence with IA IADT.

OCL processing is terminated.

Verify if the occurrence input arrival date and time is later than the long term plan end time.

EQQCL5OE

OPERATION NUMBER MUST BE SPECIFIED

The operation number is a required keyword for the instruction.

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL5PE

WORKSTATION ID MUST BE SPECIFIED

Workstation ID is a required keyword for the instruction.

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL5QE

WORKSTATION WSNAME NOT FOUND IN THE DATABASE

Workstation WSNAME is not defined in the scheduler’s Workstation database.

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL5RE

JOBNAME MUST BE SPECIFIED FOR WORKSTATION WSNAME

Workstation WSNAME requires the jobname (job-setup, computer, or printer)

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL5SE

DATE1 AND DATE2 ARE MUTUALLY EXCLUSIVE KEYWORDS

You cannot use DATE1 and DATE2 keywords in the same CHKDATE instruction.

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL5TE

INTERNAL PREDECESSOR DOESN'T EXIST: PREOPNUM

OCL tried to add an internal predecessor that does not exist.

OCL processing is terminated.

Check that the PREOPNUM() keyword refers to an existing operation number. If it does not, correct the instruction and resubmit the job. If the PREOPNUM() keyword is not specified, OCL uses the default operation number (initialization parameter DEFOPNO) as the internal predecessor operation. Verify that the application contains an operation with the number equal to the number specified in the DEFOPNO parameter.

EQQCL5UE

INCVALUE VALUE CAN'T BE GREATER THAN 30

The value of INCVALUE must be in the range 1–30.

OCL processing is terminated.

Specify a correct INCVALUE and resubmit the job.

EQQCL5VE

THE OPERATION INPUT ARRIVAL MUST BE IN THE YYMMDDHHMM FORMAT

OCL found an invalid operation input arrival date and time.

OCL processing is terminated.

Specify the operation arrival date and time in the YYMMDDHHMM format, correct the instruction and resubmit the job.

EQQCL5WE

THE OPERATION DEADLINE MUST BE IN THE YYMMDDHHMM FORMAT

OCL found an invalid operation deadline date and time.

OCL processing is terminated.

Specify the operation deadline date and time in the YYMMDDHHMM format, correct the instruction and resubmit the job.

EQQCL5XE

NOT POSSIBLE TO ADD THE OPERATION OPNUM IN OCCURRENCE APPL

OCL tried to insert a new operation in the application occurrence APPL, but a problem occurred.

OCL processing is terminated.

Verify if the operation OPNUM already existed in the occurrence. Refer to the error messages in the scheduler’s message log.

EQQCL5YE

NOT POSSIBLE TO DEFINE INTERNAL PRED. PREOPNUM TO OPERATION OPNUM

OCL tried to define an internal predecessor to operation OPNUM, but a problem occurred.

OCL processing is terminated.

Verify that you provided all the provided OCL parameters necessary to uniquely identify the Application Operation (ADID, IA, and eventually OSTATUS) and the predecessor (PREADID, PREIA and eventually PREOSTAT). Then correct and resubmit the job.

EQQCL5ZE

NOT POSSIBLE TO REMOVE THE OCCURRENCE FROM THE APPLICATION GROUP

OCL tried to remove an occurrence from the application group before deleting it from the current plan or from the long term plan, but a problem occurred.

OCL processing is terminated.

Verify that you specified the correct occurrence application ID and input arrival date and time to uniquely identify the application in the group. Then correct and resubmit the job.

EQQCL60E

NOT POSSIBLE TO DELETE OCCURRENCE APPL WITH IA IADT

OCL tried to delete the occurrence APPL, but a problem occurred.

OCL processing is terminated.

Verify that you specified the correct occurrence application ID and input arrival date and time to uniquely identify the application in the group. Correct them and resubmit the job.

EQQCL61E

NOT POSSIBLE TO DELETE OPERATION OPNUM OF OCCURRENCE APPL

OCL tried to delete operation OPNUM from the occurrence APPL, but a problem occurred.

OCL processing is terminated.

Verify that the operation number is correctly specified for the selected occurrence Application ID. Then correct and resubmit the job.

EQQCL62E

DATE MUST BE SUPPLIED

A date must be supplied in the CHKDATE instruction.

OCL processing is terminated.

Use the DATE1 or DATE2 keyword according with the format of the date and resubmit the job.

EQQCL63E

DATE NOT VALID: DATE LENGTH CANNOT BE > 10

An invalid date was specified in the CHKDATE instruction. Valid date formats are YYMMDD, YY/MM/DD, YYYYMMDD, YYYY/MM/DD, DDMMYY, DD/MM/YY, DDMMYYYY, and DD/MM/YYYY.

OCL processing is terminated.

Correct the date and resubmit the job.

EQQCL64E

DATE NOT VALID: DATE LENGTH CANNOT BE < 6

An invalid date was specified in the CHKDATE instruction. Valid date formats are YYMMDD, YY/MM/DD, YYYYMMDD, YYYY/MM/DD, DDMMYY, DD/MM/YY, DDMMYYYY, and DD/MM/YYYY.

OCL processing is terminated.

Correct the date and resubmit the job.

EQQCL65E

DATE NOT VALID: FORMAT NOT RECOGNIZED

An invalid date was specified in the CHKDATE instruction. Valid date formats are YYMMDD, YY/MM/DD, YYYYMMDD, YYYY/MM/DD, DDMMYY, DD/MM/YY, DDMMYYYY, and DD/MM/YYYY.

OCL processing is terminated.

Correct the date and resubmit the job.

EQQCL66E

DATE NOT VALID: IT'S NOT IN THE YYYYMMDD FORMAT

The date supplied is not in the YYYYMMDD format.

OCL processing is terminated.

Correct the date and resubmit the job.

EQQCL67E

YEAR YEAR MUST BE INCLUDED BETWEEN 1996 AND 2999

The date specified in the CHKDATE instruction is outside the valid range 1996–2999.

OCL processing is terminated.

Correct the date and resubmit the job.

EQQCL68E

MONTH MONTH MUST BE INCLUDED BETWEEN 01 AND 12

The date specified in the CHKDATE instruction is invalid; it is not in the range 01–12.

OCL processing is terminated.

Correct the date and resubmit the job.

EQQCL6AE

STATUS INVALID: IT CAN BE: C, E, D, P, S, U OR W

An invalid occurrence status was specified in the CHKAPPL instruction.

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL69E

DAY DAY MUST BE INCLUDED BETWEEN 01 AND LAST_DAY

The date specified in the CHKDATE instruction is invalid. The value of day DAY must be in the range 01–LAST_DAY. LAST_DAY is the last day of the month specified in the input date.

OCL processing is terminated.

Correct the date and resubmit the job.

EQQCL6BE

OCCURRENCE NAME CAN'T BE '*'

An invalid occurrence ID was specified.

OCL processing is terminated.

Correct the APPL keyword and resubmit the job.

EQQCL6CE

ALERT PARAMETER CAN BE YES OR NO

An invalid ALERT keyword was specified.

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL6DE

USER ID MUST BE SPECIFIED FOR ALERTING

The USER keyword is required with ALERT(YES).

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL6EE

NOT POSSIBLE TO ISSUE THE WTO

OCL tried to invoke the IPOWTO program, but a problem occurred.

OCL processing is terminated.

Make sure that the IPOWTO program is available to OCL and resumbit the job.

EQQCL6FE

INVALID CMD COMMAND

CMD can be only SRSTAT, OPSTAT, or WSSTAT.

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL6GE

VARIABLE TABLE NOT FOUND IN DATABASE

The variable table specified in the INIT instruction does not exist in the scheduler’s database.

OCL processing is terminated.

Specify a valid variable table in the INIT instruction and resubmit the job.

EQQCL6HE

INTERNAL SUCCESSOR OPERATION NOT FOUND: S_OPNUM

OCL tried to release an internal successor, but a problem occurred. S_OPNUM is the successor operation number.

OCL processing is terminated.

If the problem persists, for the information to collect, see the Diagnosis Guide and Reference, "Problem analysis procedures" section.

EQQCL6IE

NOT POSSIBLE TO EXECUTE EQQPIFT PROGRAM

OCL could not run the EQQPIFT program.

OCL processing is terminated.

Make sure that the EQQPIFT load module is available to OCL and resubmit the job.

EQQCL6JE

NEW JOBNAME INVALID OR MISSING

A valid NEWJOB keyword must be specified in the CHGJOB instruction.

OCL processing is terminated.

Specify a valid NEWJOB keyword and resubmit the job.

EQQCL6KE

CANNOT LIST THE WORKSTATIONS

OCL tried to list the workstations defined in the scheduler’s Workstation database, but a problem occurred.

OCL processing is terminated.

If the problem persists, for the information to collect, see the Diagnosis Guide and Reference, "Problem analysis procedures" section.

EQQCL6LE

NOT POSSIBLE TO MODIFY OPERATION OPNUM OF OCCURRENCE APPL

OCL tried to modify operation OPNUM in the occurrence APPL, but a problem occurred.

OCL processing is terminated.

Refer to the messages in the scheduler’s message log and contact IBM Software Support.

EQQCL6ME

SPECIFY THE OPNO() KEYWORD OR SPECIFY THE DEFAULT OPERATION NUMBER

The OPNO keyword is not specified. OCL tried to use the default operation number, which is not specified in the initialization parameter DEFOPNO.

OCL processing is terminated.

Specify the OPNO keyword or the default operation number in the initialization parameter DEFOPNO.

EQQCL6NE

NOT POSSIBLE TO MODIFY THE OPERATION STATUS: OPNO(OPNUM)

OCL tried to modify the status of operation OPNUM, but a problem occurred.

OCL processing is terminated.

If the problem persists, for the information to collect, see the Diagnosis Guide and Reference, "Problem analysis procedures" section.

EQQCL6OE

NEW JOBNAME IS BLANK

The NEWJOB keyword was not specified in the CHGJOB instruction.

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL6PE

NOT POSSIBLE TO CHANGE THE JOBNAME

OCL tried to change the jobname of an operation, but a problem occurred.

OCL processing is terminated.

If the problem persists, for the information to collect, see the Diagnosis Guide and Reference, "Problem analysis procedures" section.

EQQCL6QE

PREDECESSOR OPERATION NOT FOUND: PREOPNUM

OCL tried to add a predecessor that does not exist

OCL processing is terminated.

Verify the PREOPNO keyword or the initialization parameter DEFPREOPNO. Correct the instruction and resubmit the job.

EQQCL6RE

NOT POSSIBLE TO MODIFY THE OPERATION OPNUM

OCl tried to modify operation OPNUM, but a problem occurred.

OCL processing is terminated.

Verify that you specified the correct OPNUM. Correct the instruction and resubmit the job.

EQQCL6SE

CAN'T DEFINE THE PRED. FOR OPERATION OPNUM: PREOPNO(P_OPNUM) APPL(P_APPL)

OCL tried to add a new predecessor to operation OPNUM.
P_OPNUM
The predecessor operation number
P_APPL
The predecessor occurrence ID.

OCL processing is terminated.

Verify the correctness of the values of the predecessor keywords used in the ADDPRED instruction, correct them and resubmit the job.

EQQCL6TE

CAN'T HAVE A DEPENDENCY ON ITSELF: PREAPPL(P_APPL) PREIA(IADT)

In the long term plan, an occurrence cannot have a predecessor with the same occurrence ID and input arrival date and time.

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL6UE

NOT POSSIBLE TO CREATE A NEW DEPENDENCY: PREAPPL(PREAPPL)

OCl tried to define a new dependency in an application occurrence in the long term plan, but a problem occurred.

OCL processing is terminated.

Verify the correctness of the values of the predecessor keywords used in the ADDPRED instruction, correct them and resubmit the job.

EQQCL6VE

OPERATION NOT FOUND: OPNUM

Operation OPNUM does not exist in the occurrence to be modified.

OCL processing is terminated.

Verify the OPNO keyword or the default operation number in the initialization parameter DEFOPNO. Correct the instruction and resubmit the job.

EQQCL6WE

NOT POSSIBLE TO DELETE THE DEPENDENCY DEFINITION

OCL tried to delete a predecessor, but a problem occurred.

OCL processing is terminated.

Verify the correctness of the keyword values of the FORCE instruction, correct them and resubmit the job.

EQQCL6XE

SPECIAL RESOURCE NAME MUST BE SUPPLIED

RESNAME is a required keyword.

OCL processing is terminated.

Specify the RESNAME keyword and resubmit the job.

EQQCL6YE

SPECIAL RESOURCE USAGE MUST BE SUPPLIED

RESUSAGE is a required keyword.

OCL processing is terminated.

Specify the RESUSAGE keyword and resubmit the job.

EQQCL6ZE

ONERROR ACTION CAN BE Y OR N OR BLANK

An invalid ONERROR keyword was specified.

OCL processing is terminated.

Correct the instruction specifying one of the possible values and resubmit the job.

EQQCL70E

NOT POSSIBLE TO MODIFY EXTENDED INFO

OCL was unable to add or modify the extended information in the current plan.

The extended information is unchanged.

Verify the correctness of the values of the predecessor keywords used in the ADDPRED instruction, correct them and resubmit the job.

EQQCL71E

OPNO() AND EXCLOP() ARE MUTUALLY EXCLUSIVE KEYWORDS

OPNO and EXCLOP are mutually exclusive keywords.

OCL processing is terminated.

Specify the OPNO or the EXCLOP keyword, correct the instruction and resubmit the job.

EQQCL72E

CAN'T RELEASE THE SUCCESSOR OF OPERATION OPNUM: APPL(S_APPL) OPNO(S_OPNUM)

OCL tried to release an external successor of operation OPNUM, but a problem occurred.

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL73E

YOU CAN SPECIFY ONLY ONE OPERATION NUMBER

Only one operation number is accepted in the OPNO keyword.

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL74E

DEFAULT OPERATION NUMBER IS NOT SPECIFIED (DEFOPNO PARAMETER)

OCL is trying to release an internal successor. OCL would use the default operation number as an internal predecessor of this operation, but the default operation number was not specified in the DEFOPNO parameter of the OCL PARMLIB.

OCL processing is terminated.

Specify the DEFOPNO parameter in the OCL PARMLIB.

EQQCL75E

OPNO() CANNOT BE EQUAL TO DEFOPNO INITIALIZATION PARAMETER: OPNUM

OCL is trying to release an internal successor of operation OPNUM. It would use the default operation number as an internal predecessor of this operation, but the value of OPNO must not be the same as the default operation number.

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL76E

REQUIRED KEYWORD(S) MISSING. SPECIFY THE INIT INSTRUCTION

The variable table or the scheduler’s subsystem name was not supplied.

OCL processing is terminated.

Specify the INIT instruction before the UPD or SETUPD instructions and resubmit the job.

EQQCL77E

CAN'T DEFINE THE DEFAULT OPERATION NUMBER OPNUM AS A PREDECESSOR OF S_OPNUM

OCL tried to add the default operation number OPNUM as a predecessor of S_OPNUM. S_OPNUM is the internal successor to be released by the RELOP instruction.

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL78E

CAN'T RELEASE THE SUCCESSOR OPERATION: S_OPNUM

OCL tried to release an internal successor, but a problem occurred.

OCL processing is terminated.

Verify the correctness of the keyword values of the RELOP instruction, correct them and resubmit the job.

EQQCL79E

CAN'T DELETE THE SPECIAL RESOURCE: RES_NAME OPNO(OPNUM)

OCL tried to delete the special resource RES_NAME from the operation OPNUM.

OCL processing is terminated.

Verify the correctness of the keyword values of the FORCE instruction, correct them and resubmit the job.

EQQCL7AE

OCCURRENCE ID MUST BE SUPPLIED

APPL is a required keyword.

OCL processing is terminated.

Specify the APPL keyword and resubmit the job.

EQQCL7BE

CALENDAR NOT FOUND: CAL

The calendar CAL was not found in the scheduler’s Calendar database.

OCL processing is terminated.

Specify the calendar CAL and resubmit the job.

EQQCL7CE

SPECIFY THE PREOPNO() KEYWORD OR THE DEFAULT OPERATION NUMBER

OCL is adding a new operation in an application occurrence. It tried to define the internal predecessor of this operation, but either the PREOPNO keyword or the default operation number was not specified.

OCL processing is terminated.

Specify the PREOPNO keyword or the default operation number in the OCL PARMLIB.

EQQCL7DE

DATE IS BLANK

OCL tried to determine whether an input date corresponds to a free day, but the date is blank.

OCL processing is terminated.

Provide the date and resubmit the job.

EQQCL7EE

VALID VALUES FOR OPCVER ARE 1 AND 2

The initialization parameter OPCVER is not either 1 or 2.

OCL processing is terminated.

Correct the parameter and resubmit the job.

EQQCL7FE

NOT POSSIBLE TO ALLOCATE DATASET: DSNAME(WTOIN)

OCL tried to allocate the member WTOIN in the data set DSNAME, but a problem occurred.

OCL processing is terminated.

Verify that you allocated correctly the WTOIN data set and resubmit the job.

EQQCL7GE

VALID VALUES FOR TSOCMD PARAMETER ARE YES AND NO

The initialization parameter TSOCMD is not either YES or NO.

OCL processing is terminated.

Correct the parameter and resubmit the job.

EQQCL7HE

NOT POSSIBLE TO WRITE THE MESSAGE ON DATASET: DSNAME(WTOIN)

OCL tried to write the message text of the WTOR in the member WTOIN of data set DSNAME, but a problem occurred.

OCL processing is terminated.

Verify that you allocated correctly the WTOIN data set and resubmit the job.

EQQCL7IE

INVALID PARAMETER OR INVALID VALUE FOR PARAMETER: INVPARM

The message variable shows the incorrect parameter.

OCL processing is terminated.

Specify a valid value for PARAMETER: INVPARM and resubmit the job.

EQQCL7JE

NOT POSSIBLE TO MODIFY THE OCCURRENCE APPL

OCL tried to modify the occurrence APPL, but a problem occurred.

OCL processing is terminated.

Either another user is editing the occurrence or you do not have permission to modify it. Verify if the occurrence is locked by another user or that you have permission to submit the OCL job. Try to rerun the command.

EQQCL7KE

CANNOT UPDATE THE LOG DATASET

OCL tried to write a new record in the log data set, but a problem occurred.

OCL processing is terminated.

The data set pointed by the OCLLOG DD card cannot be updated. Check the other messages reported in the SYSTSPRT log, correct the problem and submit again the OCL JCL.

EQQCL7LE

NOT POSSIBLE TO RESOLVE DEPENDENCIES

OCL can not handle versioning and dependencies resolution at the same time.

OCL processing is terminated.

The applications group you want to add contains more versions of the same application, for reason it is not possible to resolve the external dependencies. Correct the application group and rerun the OCL JCL.

EQQCL7NE

EXTENDED JOB NAME LENGTH INVALID

The Extended Job Name length must be maximum of 54 characters.

OCL processing is terminated .

Correct the Extended Job Name length and resubmit the job.

EQQCL7OE

NOT POSSIBLE TO MODIFY EXTENDED JOB NAME EXTNAM

OCL was not able to add or modify the Extended Job Name in the current plan .

OCL processing is terminated.

Analyze the messages reported in the SYSTSPRT and in the EQQMLOG logs, correct the problem and submit the OCL JCL again.

EQQCL7PE

SPECIFY EXTNAM OR EXTSE OR BOTH

OCL needs either the extended name, the scheduling environment name, or both, to modify the extended information.

The extended information is unchanged.

Specify at least either the extended name or the scheduling environment name.

EQQCL7SE

SCHEDULING ENVIRONMENT NAME LENGTH INVALID

The scheduling environment name is too long. The maximum length allowed is 16 characters.

OCL processing is terminated.

Specify a name of acceptable length and submit the job again.

EQQCL7TE

COMMAND TEXT LENGTH NOT VALID

The length of the command text specified in COMMTEXT is longer than the maximum 255 characters allowed.

OCL processing is terminated.

Correct the command text and submit the job again.

EQQCL7UE

AUTOMATED FUNCTION LENGTH NOT VALID

The length of the automated function specified in AUTFUNC is longer than the maximum 8 characters allowed.

OCL processing is terminated.

Correct the automated function and submit the job again.

EQQCL7VE

SECURITY ELEMENT LENGTH NOT VALID

The length of the security element specified in SECELEM is longer than the maximum 8 characters allowed.

OCL processing is terminated.

Correct the security element length and submit the job again.

EQQCL7WE

COMPLETION INFO LENGTH NOT VALID

The length of the completion information specified in COMPINFO is longer than the maximum 64 characters allowed.

OCL processing is terminated.

Correct the completion info length and submit the job again.

EQQCL7XE

SPECIFY AT LEAST COMMTEXT, AUTFUNC, SECELEM, OR COMPINFO

The OCL instruction CHGOPSAI requires at least one of the keywords COMMTEXT, AUTFUNC, SECELEM, and COMPINFO. If COMMTEXT is specified, its value cannot be blank or empty.

OCL processing is terminated.

Correct the instruction and submit the job again.

EQQCL7YE

NOT POSSIBLE TO MODIFY SA INFO

An error occurred that prevented system automation information from being updated.

OCL processing is terminated.

Check for the return code and error messages from PIF. Correct the instruction and submit the job again.

EQQCL7ZE

THE BRACKET CHARACTER IS MISSING IN THE COMMTEXT FIELD

The COMMTEXT argument requires a bracket or a continuation character.

OCL processing is terminated.

Correct the instruction and submit the job again.

EQQCL80E

ONCOMPL ACTION CAN BE Y, N, R, OR BLANK

The ONCOMPL keyword specified is not valid.

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL81E

WLM SERVICE CLASS LENGTH INVALID

The length of the WLM service class can be up to 8 characters.

OCL processing is terminated.

Correct the value for the WLM service class and resubmit the job.

EQQCL82E

LUNAME AND REMHOST PARAMETERS ARE MUTUALLY EXCLUSIVE.

LUNAME parameter cannot be specified together REMHOST parameter, because they correspond to different communication protocols.

OCL processing is terminated.

Correct the instruction and rerun.

EQQCL83E

REMPORT VALUE MUST BE USED IN CONJUNCTION WITH REMHOST.

If you specify REMPORT, you must specify also REMHOST.

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL84E

REMPORT MUST BE A POSITIVE NUMBER: VALID VALUES ARE FROM 0 TO 65535.

The specified REMPORT is not in the range 0-65535.

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL85E

REMHOST VALUE LENGTH IS NOT VALID: 52 CHARACTERS AT MAX.

The specified REMHOST exceeds the allow length.

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCL86E

CAN'T ADD DEP. TO COND XC OP XO: PREOPNO(XPO) PREAPPL(XPA)

OCL failed to add a condition dependency to condition XC in operation XO. XPO is the predecessor operation, and XPA is the predecessor application ID. Possible reasons for the error are:
  • Condition XC does not exist.
  • The scheduler already evaluated the status of condition XC.

OCL processing ends.

Correct the instruction and resubmit the job.

EQQCL87E

CAN'T DEFINE THE CONDITION XC FOR OPERATION XO

OCL failed to define a condition XC in operation XO. Possible reasons for the error are:
  • Condition XC already exists.
  • Operation XO does not exist.
  • Operation XO had a status different from waiting or ready at the time of the request.

OCL processing ends.

Correct the instruction and resubmit the job.

EQQCL88E

CONDITION NOT FOUND: XO

OCL did not find condition XC.

OCL processing ends.

Consider changing the condition ID and resubmit the job.

EQQCL89E

CAN'T MODIFY THE CONDITION XC FOR OPERATION XO

OCL failed to modify condition XC in operation XO. Possible reasons for the error are:
  • Condition XC does not exists.
  • Operation XO does not exist.
  • Operation XO had a status different from waiting or ready at the time of the request.

OCL processing ends.

Correct the instruction and resubmit the job.

EQQCL8AE

CAN'T DELETE THE CONDITION XC FOR OPERATION XO

OCL failed to delete condition XC from operation XO. Possible reasons for the error are:
  • Condition XC does not exists.
  • Operation XO does not exist.
  • Operation XO had a status different from waiting or ready at the time of the request.

OCL processing ends.

Correct the instruction and resubmit the job.

EQQCL8BE

DEP. NOT DELETED IN COND XC OP XO: PREOPNO(XPO) PREAPPL(XPA)

OCL failed to delete a condition dependency from condition XC in operation XO. XPO is the predecessor operation, and XPA is the predecessor application ID. Possible reasons for the error are:
  • Condition XC does not exist.
  • The scheduler already evaluated the status of condition XC.

OCL processing ends.

Correct the instruction and resubmit the job.

EQQCL8CE

MISSING PARAMETER: INVPARM

The message variable shows a required parameter that is missing.

OCL processing is terminated.

Correct the instruction and resubmit the job.

EQQCLNLE

EXTENDED JOB NAME LENGTH INVALID

The Extended Job Name length must be maximum of 54 characters.

OCL processing is terminated.

Correct the Extended Job Name length and resubmit the job.

EQQCLZ6E

ONERROR ACTION CAN BE Y, N, OR BLANK

The ONERROR keyword specified is not valid.

OCL processing is terminated.

Correct the instruction and resubmit the job.