Configuring a run to scan the application code

After you added the assets in the remote repository to a project in your team space, you can configure a run to scan the application code specified in the codesweep file by using the execution service on HCL OneTest™ Server.

Before you begin

You must have completed the following tasks:

Read and completed the tasks mentioned in Considerations to scan an application code.
Read and completed the tasks mentioned in Considerations for using a remote Kubernetes cluster, if you want to use a remote Kubernetes cluster as a location to run the test.
Ensured that you are assigned a role of a Project Owner in the project. See Managing access to server projects.
Ensured that you are assigned a role as a Project Owner or Tester in the project. See Managing access to server projects.

Procedure

Log in to HCL OneTest™ Server.

The team space that contains your project is displayed.
Open the project that contains the test assets, and then click Execution.

Select the branch of the repository that contains the test assets.

The test assets that are contained in the selected branch of the repository are displayed in the following tabs on the Execution page:


Tab	Description
SUITES	Lists all suites, compound tests, JMeter tests, JUnit tests, Postman tests, Rate Schedules, or VU Schedules that are in the selected branch of the repository.
TESTS	Lists all API tests, functional tests, or performance tests that are in the selected branch of the repository.
ADVANCED	Lists all assets that are displayed when custom filters are applied for assets in the selected branch of the repository.

Identify the test asset or resource that you want to run by performing any of the following actions:

Scroll through the list.

Tip: You can hover over the icon in the Type column to know the type of the test asset.

Note: You can also identify the type of the asset from the icon that represents the test type as shown in the following table:


Icon	Represents	Listed in the SUITES tab	Listed in the TESTS tab	Listed in the ADVANCED tab
	API test
	Functional test
	Performance test
	AFT Suite
	API Suite
	Compound Test
	Rate Schedule
	VU Schedule

Search for the test asset or resource by entering any text contained in the test asset or resource name in the Search field.
Click the Filter icon in the SUITES or TESTS tab to filter the displayed assets based on the asset type.
For example, select API Suite in the SUITES tab to display all API Suites or select Functional Test in the TESTS tab to display all functional tests in the selected branch of the repository.
Click the Filter icon in the ADVANCED tab, and then create a filter query by using the New filter option by performing the following steps:
1. Click New filter.
2. Enter a name for the filter.
3. Select an operator, and add a rule, or a group of rules.
4. Add or enter the relevant parameters and either select or enter the condition and the criteria for the condition.
  You can select a parameter from the following list:
  - Type
  - Test Asset Name
  - Test Asset Path
  - Last Result
  - Next Run
  - Components
5. Save the filter query to save and apply the filter query to filter the assets based on the query.
  The test assets that match the filter criteria are displayed.
Retrieve and apply a saved filter query, if you have saved filter queries previously by performing the following steps:
Note: The filter query applied previously is selected and the assets based on that filter query are displayed. To apply a different filter query, you must have created and saved the filter query.
1. Click the Filter icon in the ADVANCED tab.
  The filter queries that you created and saved are displayed.
2. Click the filter that you want to apply.
  The test assets that match the filter criteria are displayed.

Click the Execute icon in the row of the identified test asset.
The Execute test asset dialog is displayed.
Notes:
- If you have configured some or all of the settings for the current test run, and you do not want to continue with those settings, you can reset the settings by clicking Reset.
- If you want to repeat a test run and do not want to use the saved settings from a previous run, you can reset all the saved settings to their default values by clicking Reset.
Select the version of the test resources that you want to run by completing any of the following actions:
- Expand the list in the Version field, find the version of the test resources, and then select the version.
  Use the following details about the version of the test resources that are displayed to identify the version that you want:
  
  Commit message.
  
  Tags labeled by the user for the version committed.
  
  The user who committed the version to the repository.
  
  Relative time of the commit. For example, 2 hours ago or 3 days ago.
  The list displays the versions of the test resources committed by all users to the branch in the repository. The versions are arranged with the latest version that is committed, and then followed by the versions committed previously.
- Expand the list in the Version field, and then search for the version that you want to select by entering a partial or the complete commit message of that version.
  The version that matches the search criteria is displayed and it is selected for the test run.
The default value for the version selected for the run is the latest version in the selected branch of the repository. If you do not select any version, then the latest version is selected for the test run.
Notes:
- If you selected a version but you do not want to use that version in the test run, you can remove the selected version by clicking the icon. As a result, the default version is selected for the test run.
- If you repeated a test or ran the test again from the Results page, then the version of the test resources that you chose for the earlier run is shown as selected. You can either retain this version or select any other version from the list. You can also remove the previous version by clicking the icon.
Select the time for scheduling the test run from the following options:
- No action is required if you want to initiate the test run immediately after you click Execute.
  
  Important: Click Execute only after you have configured the other settings in this dialog.
  
  Note: The default time for scheduling a run is Now.
- Select Later and configure the date and time to schedule a test run.
The default time for scheduling a run is Now.
Notes:
- If you have configured some or all of the settings for the current test run, and you do not want to continue with those settings, you can reset the settings by clicking Reset.
- If you want to repeat a test run and do not want to use the saved settings from a previous run, you can reset all the saved settings to their default values by clicking Reset.
Enter a label for the test run that helps you to identify the test on the Results page.

After the test run completes, the label that you entered is displayed for the test under the Labels column on the Results page. After you have created a label, any member of the project can use that label.

The default value for the Label field is null or an empty field.

Important: The configuration that you set for the test run in the Execute test asset dialog is preserved when you run the same test again. Those changes are not visible when another user logs in to HCL OneTest™ Server. For example, if you created new variables on the server, those variables are available only for you when the same test is run again.

If you want to run the test immediately or at the scheduled time, click Execute, or continue with the next step.
Follow the instructions if you want to change the location of a Kubernetes cluster for running the test:
1. Click the LOCATION tab, if it is not already open.
  The Default Cluster is the default location where the test runs, and it is listed under the Host column. The information about the availability of the default location is displayed.
  Important: You must have added the registered remote Kubernetes clusters to your project that are then displayed under the Override column:
  Notes:
  
  If the remote clusters are not added to your project, the option No override options is displayed as the default value and the test runs in the Kubernetes cluster of HCL OneTest™ Server.
  
  If remote clusters are added to your project, the added clusters are displayed along with their availability status and ownership information.
2. Select the location where you want to run the test asset from the following options:
  - Select the Default Cluster when no remote clusters are available in your project.
  - Select the remote cluster from the list when a remote cluster is available in your project.
  - Select No override options, if you selected any remote cluster and want to revert to the Default Cluster to run the test asset.
3. Click Execute.
  The test run is initiated.

Results

You have configured and either started or scheduled a run of a scan of the application code that is specified in the codesweep file.

What to do next

You can choose to perform any of the following tasks after you have initiated or scheduled a run:

Stop the test run at any point after the test run is initiated from the Execution page. See Stopping test runs.
Cancel a scheduled test run from the Execution page. See Canceling scheduled test runs.
View all the states of the test asset by clicking the Show in the Progress page icon for the test asset for which you started or scheduled the run. See Viewing the state of test assets.
View the progress of the test from the Progress page. See Viewing the progress of running test assets.
View the results, reports, and logs of the test from the Results page after the test completes the run. See Test results.