Home
Test Execution Specialist Guide
This guide describes tasks that you must complete before you can configure and run tests in HCL OneTest™ Server. You can find information about configuring runs for the different test types that are supported. You can also find information about other tasks that you can perform on the Resource Monitoring Service, Virtualization, and Integrations with third-party applications. This guide is intended for testers or test execution specialists.
Configuration of a change management system
When you use any application to create and track defects (bugs), issues, or other work items, you can configure the application as a change management system on HCL OneTest™ Server. You can then create defects (bugs), issues, or other work items without the need to open your application.
Configuration of Jira as a change management system
You can integrate HCL OneTest™ Server with Jira to manage and create defects after the test run is complete.
Configuring the Jira server
You must configure the Jira server in your project to create a Jira defect from HCL OneTest™ Server.

Test Execution Specialist Guide
This guide describes tasks that you must complete before you can configure and run tests in HCL OneTest™ Server. You can find information about configuring runs for the different test types that are supported. You can also find information about other tasks that you can perform on the Resource Monitoring Service, Virtualization, and Integrations with third-party applications. This guide is intended for testers or test execution specialists.
- System modeling
  In this topic, you can find information about using the system model feature. You can also find the tasks that you can perform to create a system model. You must configure a repository to save the system model that you created for the application under test.
- Prerequisites to running tests
  Before you can run a test asset in a project on HCL OneTest™ Server, you must read the information about the different tests assets. You can add a remote static agent, Docker host, or Kubernetes cluster to the project and then select it as an alternate location to run the test assets.
- Management of agents
  You can find information about managing the agents that you must install on remote computers and configure the agents to register with HCL OneTest™ Server. After the agents are registered, you can add them to your projects and then select them as locations to run tests.
- Management of Docker hosts
  You can find information about the tasks that you can perform on remote Docker hosts. After you set up a remote Docker host, you can register the Docker host with HCL OneTest™ Server. You must then add the registered remote Docker host to your project before you can run tests on the remote Docker host location.
- Management of remote Kubernetes clusters
  You can find information about the tasks that you can perform on remote Kubernetes clusters. After you set up a remote Kubernetes cluster, you can register the external cluster with a team space on HCL OneTest™ Server. You must then add the remote cluster to a project before you run test assets or resources on the remote Kubernetes cluster.
- Test run configurations
  You can configure and run tests in HCL OneTest™ Server after you add the test resources to your project in your team space.
- Configuration of a scan of an application code
  You can use HCL OneTest™ Server to scan your application code for security vulnerabilities similar to using the HCL AppScan CodeSweep plugin to scan code in Visual Studio.
- Management of running tests
  Find information about the tasks that you can perform on a test that you configured for a run either while it runs or after it completes the run.
- Management of virtualized services
  You can find information about the tasks that you can perform on and manage the virtualized services that run on HCL OneTest™ Server. You can start or stop the virtual services that are connected to HCL OneTest Server. You can view the routing rules and usage statistics of virtualized services, agents, or intercepts that are connected to HCL OneTest Server.
- Test results
  After the tests, Suites, or schedules are run and completed, you can view the results and open the reports in HCL OneTest™ Server to analyze the verdict, the performance, and statistics. You can also re-execute tests and schedules from the Result page with the same commit id.
- Resource monitoring
  When you apply load to a system under test, the amount of resources consumed by your system is increasing. If the capacity of the resources does not match the load, you can see performance issues in the results. Resource monitoring in HCL OneTest™ Server helps you monitoring the resources of a system and establish the performance metrics and usage data of the system. Thus, you can observe the health of these resources while a schedule is running.
- Configuration of a change management system
  When you use any application to create and track defects (bugs), issues, or other work items, you can configure the application as a change management system on HCL OneTest™ Server. You can then create defects (bugs), issues, or other work items without the need to open your application.
  - Configuration of Jira as a change management system
    You can integrate HCL OneTest™ Server with Jira to manage and create defects after the test run is complete.
    - Generating public and consumer keys
      You must generate a public key and a consumer key in a project that is available on HCL OneTest™ Server to configure Jira as a defect management system.
    - Setting up an application link in the Jira server
      You must set up an application link in the Jira server to establish a connection between the Jira server and HCL OneTest™ Server.
    - Configuring the Jira server
      You must configure the Jira server in your project to create a Jira defect from HCL OneTest™ Server.
    - Creating Jira defects
      You can create a Jira defect for the test result from HCL OneTest™ Server when actual test results differ from the expected results.
    - Viewing details of the Jira issues
      After you create Jira issues in HCL OneTest™ Server, you can view and track the details of the Jira issues in Jira.
    - Managing the Jira server configuration
      You can manage the Jira server configuration that you set in HCL OneTest™ Server when you want to modify the project configured in Jira or when you want to delete the existing Jira configuration.
- Integrating with other applications
  You can integrate certain applications with HCL OneTest™ Server to run tests, view the test results, and create defects.
- Managing access to the server
  Desktop clients and third-party integrations use offline user tokens to connect to HCL OneTest™ Server.

Configuring the Jira server

You must configure the Jira server in your project to create a Jira defect from HCL OneTest™ Server.

Before you begin

You must have completed the following tasks:

Been assigned a project Owner role.
Generated a public key and consumer key for the project in HCL OneTest™ Server. See Generating public and consumer keys.
Shared the public key and consumer key with the administrator of the Jira server to set up an application link in Jira.
Created an application link in Jira, if you are an administrator of the Jira server. See Setting up an application link in the Jira server.

Procedure

Open your project.
Expand Manage, and then click Integration.
Click the CHANGE MANAGEMENT SYSTEM tab.
Click the Open action menu icon , and then click Configure.
Complete the authorization process on the Authorize user window by performing the following steps:
1. Click the authorization URL of the Jira server.
2. Optional: Log in to the Jira server account with your valid credentials.
  
  Note: The Login page is displayed only if you are not already logged in to the Jira server.
3. Read the message that is displayed, and then click Allow to authorize the Jira server account.
  
  After the authorization is successful, the Access Approved page is displayed with a verification code.
4. Copy the verification code, and then enter the verification code in the field on the Authorize user window of HCL OneTest™ Server.
5. Click Save.
  The Configure change management system window is displayed.
Select a Jira server project that is available from the Project drop-down list, and then click Update.

Results

You have configured the Jira server for your project on HCL OneTest™ Server. You can view a tick icon green tick icon next to the URL of the Jira server upon the successful configuration.

What to do next

You can perform the following tasks:

Expand the Jira Integration Details section to view the project name of Jira that you selected during the configuration.
Create defects for the test results available in your project on HCL OneTest™ Server. See Creating Jira defects.