Home
Test Author Guide
This guide describes how to create test scripts in HCL OneTest™ Performance and enhances tests by applying different test elements such as dataset, variables, and verification points. This guide is intended for testers.
Editing tests
After you record a test, you can edit it to include datasets (to provide variable data rather than the data that you recorded), verification points (to confirm that the test runs as expected), and data correlation (to ensure that returned data is appropriate for the corresponding request). You can also add protocol-specific elements to a test. When you edit a test, the modified items appear in italic type. The italic type changes to regular type after you save the test.
Editing service tests
After you record a service test, you can edit the calls and message returns to include variable data (rather than the data that you recorded). You can add verification points (to confirm that the test runs as expected), transactions, conditional processing, and custom code.
Verifying application behavior
To check the expected behavior of the application during a service test, you can add verification points after a message return. During the run, verification points produce a pass, fail, error, or inconclusive status in the Web Service Verification Point report.
Adding XSD verification points
XSD verification points enable you to check that the XML content of a service response comply with the rules defined in an XML Schema Definition (XSD) file.

Test Author Guide
This guide describes how to create test scripts in HCL OneTest™ Performance and enhances tests by applying different test elements such as dataset, variables, and verification points. This guide is intended for testers.
- Creating tests
  To create a test, you record representative interactions with an application.
- Editing tests
  After you record a test, you can edit it to include datasets (to provide variable data rather than the data that you recorded), verification points (to confirm that the test runs as expected), and data correlation (to ensure that returned data is appropriate for the corresponding request). You can also add protocol-specific elements to a test. When you edit a test, the modified items appear in italic type. The italic type changes to regular type after you save the test.
  - Editing HTTP tests
    After you record a test, you can edit it to include variable data rather than the data that you recorded and can include verification points to confirm that the test runs as expected. You can also edit the test to include [NB1] transactions, conditional processing, custom code, and standard header or custom header to a request or response.
  - Editing SAP tests
    After you record a test, you can edit it to include variable data (rather than the data that you recorded) and verification points (to confirm that the test runs as expected).
  - Editing Citrix tests
    After you record a test, you can edit it to include variable data (rather than the data that you recorded), verification points (to confirm that the test runs as expected), transactions, conditional processing, and custom code.
  - Editing service tests
    After you record a service test, you can edit the calls and message returns to include variable data (rather than the data that you recorded). You can add verification points (to confirm that the test runs as expected), transactions, conditional processing, and custom code.
    - Web service test editor overview
      With the test editor, you can inspect or customize a test that you recorded.
    - Verifying application behavior
      To check the expected behavior of the application during a service test, you can add verification points after a message return. During the run, verification points produce a pass, fail, error, or inconclusive status in the Web Service Verification Point report.
      - Adding equal verification points
        Equal verification points enable you to check that the contents returned by a service match exactly the contents specified in the verification point.
      - Adding contain verification points
        With contain verification points, you can check that one or several elements of the XML content returned by a service match the XML fragment that is specified in the verification point.
      - Adding Xpath query verification points
        With service query verification points, you can check that a response matches an Xpath query.
      - Adding attachment verification points
        Service attachment verification points enable you to check that the attachment of a service response matches the specified criteria.
      - Adding Text verification points
        To check the text content that is returned by the service response, you can add a text verification point in the service test. When you add the verification point, you can check whether the text matches equally with the response or whether the response contains the text.
      - Adding properties verification points
        You can add verification points for the properties in a service test so that these properties in the test response are verified and validated when you play back the test.
      - Adding XSD verification points
        XSD verification points enable you to check that the XML content of a service response comply with the rules defined in an XML Schema Definition (XSD) file.
    - Working with Server Name Indication (SNI) recordings
      If you have recorded against a server that supports Server Name Indication (SNI), an extension of the TLS protocol, the recording session file displays true for the SNI Extension field. There might be a need for you to access both SNI and non-SNI applications from the same server. To run the same test without using the SNI extension, you can manually change the value to false.
    - Adding elements to a socket test
      A socket test provides the flexibility to add close, send, and receive elements to the test.
    - Managing JMS/MQ connections in a service test
      When you run a service test that includes JMS or MQ protocol, the socket connections are created and closed in the background. When you include multiple tests in a compound test or a A schedule, in this context, is used to refer to both VU Schedule and Rate Schedule., multiple connections are created and closed. Starting from 9.2, when you run service tests in a schedule, you can select a pooling strategy for these JMS/MQ connections so that when the connections are created, they do not close and are reused subsequently for the other JMS/MQ calls, if required.
    - Editing WSDL security profiles
      To ensure that your service test uses the correct security protocols to access a SOAP-based service, you must specify a security profile for the (Web Service Description Language) WSDL file. After a security profile is set up, it can be reused in multiple web service calls.
    - Testing asynchronous services
      Use the asynchronous callback services for inter-object communications in a service test.
    - Creating a reliable messaging call structure
      You can create a test structure dedicated to testing service calls based on the WS-ReliableMessaging specification.
  - Editing Socket tests
    Improve the Socket tests by adding test elements.
  - Editing Kerberos tests
    You can change the Kerberos realm, user name, and password when editing tests.
  - Adding test elements
    You can add a variety of elements to a test, such as transaction blocks, IF-THEN conditions, loops, and comments.
  - Searching within tests
    Search request data or response content by right-clicking in the data or content and selecting Find. To search for specific element types and to display the results in a table, click Select. For a still more powerful search and replace, use the Test Search function.
  - Exporting a test
    To share the test scripts with manual testers or reviewers who do not have the workbench, export the test scripts to text files. You can export one file at a time.
  - Copying test assets with dependencies
    You can export test assets, and then import them into another project or workspace without losing any dependencies. Test assets include projects, schedules, and tests. You can export and import test assets to collaborate with other testers.
  - Disabling portions of a test
    When you disable portions of a test, you can still see the disabled portion, but it is not executed during a run. You can also disable portions of a schedule by using the following procedure.
  - Running test elements in random order
    You can record multiple user scenarios in a test and then run each scenario in a random order. To do this, you put each scenario under a random selector and then select the proportion of time that the scenario should be run.
  - Renaming test assets
    As your test assets increase and become more complex, you might want to rename them. Use the Eclipse Rename function or save the assets under a different name.
  - Deleting test assets
    As your test assets grow and become more complicated, you might want to delete the assets that you no longer use.
  - Debugging custom code for tests and compound tests
    If you have custom code added to a test or a compound test, you can debug the custom code for any errors by clicking the Debug button.
  - Providing tests with variable data (datasets)
    You can produce more realistic tests by changing them to use datasets. During execution, a test that uses a dataset replaces a value in the recorded test with variable test data that is stored in the dataset. This substitution allows each virtual user to generate a different request to the server.
  - Test variables
    A test variable is a user-defined, name-value pair that stores and refers to information throughout a test and between tests.
  - Correlating response and request data
    For a test to run correctly, a request that is sent to a server might need to use a value that was returned by a previous request. By ensuring that this data is correlated accurately, you can produce better performance tests.
  - Data transformation
    You can transform HTTP application specific data such as binary data and encoded data to a more readable format to use data correlation.
- Compound tests
  You can create compound tests to help you organize smaller tests into scenarios that can then be run end-to-end. You can combine tests from different extensions to achieve end-to-end flow.
- Simulating services with stubs
  Service stubs enable you to simulate the behavior of an actual service for a wide variety testing or integration purposes.
- Sending service requests with the generic service client
  The generic service client enables you to send requests to services for which you do not have a convenient client and to view the responses returned by the service.
- Emulating workloads
  You emulate a workload by creating a schedule and adding user groups/rate runner groups, tests, and other elements to it.

Adding XSD verification points

XSD verification points enable you to check that the XML content of a service response comply with the rules defined in an XML Schema Definition (XSD) file.

Before you begin

When you add verification points, the results from a service response are compared with the expected data that are specified in the verification point test element. XSD verification points return a Pass status when the XML contents of the response are compliant with the associated XSD or a Web Service Description Language (WSDL) file that contains XSD information.

If you add multiple XSD files to the verification, then the XML content of the response must comply with all of the XSD files.

You can use the test editor to create or edit verification points.

Procedure

To add an XSD verification point to a test:

Open the test editor and select a service response element.
Click Add and select XSD Verification Point.
In the Test Element Details area of the test editor, type a name for the verification point.
Click Add XSD to add a an XSD file to the validation list or Add WSDL to add a WSDL that contains XSD information.
Click Open to display the XSD or WSDL contents.

What to do next

You can enable or disable each verification point by right-clicking the verification point in the test editor and clicking Enable or Disable.