Reason Codes for EQQXnnn, EQQAnnn, EQQGnnn, EQQKnnn and EQQMnnn
The following table lists the reason codes that can appear in some of the message with the EQQXnnn, EQQAnnn, EQQGnnn, EQQKnnn and EQQMnnn. For more information about a reason code, refer to the related message.
| Reason code | Meaning (reason for failure) | Related message |
|---|---|---|
| 000 | The record size exceeds the maximum record size for the application description data base. | EQQX300 |
| 002 | The record version is not valid. | EQQX301 |
| 003 | The application ID is not valid. | EQQX302 |
| 004 | The application status is not valid. Valid application statuses are: A for active, P for pending, or blank for both active and pending. | EQQX303 |
| 005 | The valid-to date is not valid. | EQQX304 |
| 006 | The valid-to time is not valid. | EQQX328 |
| 007 | The record identifier is not valid. | EQQX321 |
| 010 | The run cycle pointer is not valid. | EQQX305 |
| 011 | The record size does not include the run cycle. | EQQX306 |
| 012 | The offset to the next run cycle in the record is not valid. It must be 0 if it is last. | EQQX307 |
| 013 | The JCL variable table name is not valid. | EQQX417 |
| 014 | The rule name is not valid. | EQQA521 |
| 020 | The operation pointer is not valid. | EQQX308 |
| 021 | The record size does not include operation data. | EQQX309 |
| 022 | The offset to the next operation in the record is not valid. It must be 0 if it is last. | EQQX310 |
| 023 | The record size does not include dependencies and special resources. | EQQX311 |
| 100 | The valid-from date is either not valid or missing. | EQQX312 |
| 101 | The valid-from date is later than the valid-to date; it must be earlier. | EQQX313 |
| 102 | The authorization group is not valid. | EQQX314 |
| 103 | The owner ID is missing. | EQQX315 |
| 104 | The date for the last update is either not valid or missing. | EQQX316 |
| 105 | The time for the last update is either not valid or missing. | EQQX317 |
| 106 | The priority is either not valid or missing. A valid priority is a number from 1 through 9. | EQQX318 |
| 107 | The value specified in the number of operations field is not valid. A valid value is a number from 1–99. | EQQX319 |
| 108 | The number of run cycles is not valid. It does not match the actual number of run cycles in the record. | EQQX320 |
| 109 | The offset to the first run cycle is incompatible with the number of run cycles. | EQQX322 |
| 110 | The offset to the first operation is not valid. | EQQX323 |
| 111 | The characters in the common part of the application description record are not valid. | EQQX324 |
| 112 | The calendar description identifier in the application description record is not valid . | EQQX325 |
| 113 | The calendar description identifier referred to by the application description record does not exist in the database. | EQQX326 |
| 114 | The owner ID contains lower case characters. | EQQX397 |
| 115 | An application or job description which specifies a group definition cannot contain a run cycle. | EQQA516 |
| 116 | Priority cannot be specified for a group definition. | EQQA510 |
| 117 | Group definitions cannot contain operations. | EQQA500 |
| 118 | Calendar cannot be specified for an application in a group. | EQQA511 |
| 119 | Group definition cannot belong to another group. | EQQA503 |
| 120 | The valid-from time is not valid. | EQQX327 |
| 122 | Validity periods of temporary OI's must not overlap. | EQQK002 |
| 200 | The run cycle period cannot be found. | EQQX329 |
| 201 | The positive run day offset is not blank or numeric. It must be blank or 1 to 999. | EQQX330 |
| 202 | The negative run day offset is not blank or numeric. It must be blank or 1 to 999. | EQQX376 |
| 203 | The free day rule specification is not valid. A valid specification is E for free days excluded; 1 for run on the closest work day before the free day; 2 for run on the closest work day after the free day; 3 for run on the free day; or 4 for do not run at all. | EQQX331 |
| 204 | The run cycle valid-from date is either not valid or missing. | EQQX381 |
| 205 | The run cycle valid-to date is either not valid or missing. | EQQX375 |
| 206 | The negative run cycle indicator is not blank or N. It must be either blank or N. | EQQX332 |
| 207 | The input arrival time is not valid. | EQQX333 |
| 208 | The relative deadline day is not numeric. It must be a number from 0 through 99. | EQQX334 |
| 209 | The deadline time is not valid. | EQQX335 |
| 210 | The run cycle section contains not valid characters. | EQQX336 |
| 211 | Duplicate positive run day offsets found in a run cycle. | EQQX398 |
| 212 | The variable table is not defined in the database. | EQQX418 |
| 213 | No offsets have been defined for a run cycle. | EQQX436 |
| 214 | Negative runday fields contain embedded blanks. | EQQX437 |
| 215 | The rule name has already been specified as a run cycle for the AD. | EQQA522 |
| 216 | The specified rule name is not defined. | EQQA520 |
| 223 | The step level dependency check type is not valid. It must be RC. | EQQM174E |
| 224 | The procedure step name is missing in a step level dependency definition. | EQQM175E |
| 225 | Incorrect procedure step name in a step level dependency definition. The first character must be alphabetic. | EQQM176E |
| 226 | Incorrect step name in a step level dependency definition. The first character must be alphabetic. | EQQM177E |
| 227 | The step name, in a step level dependency definition, contains an incorrect character. | EQQM178E |
| 228 | The procedure step name, in a step level dependency definition, contains an incorrect character. | EQQM179E |
| 301 | The workstation description does not exist in the workstation description database. | EQQX337 |
| 302 | The operation number is incorrect. It must be a number from 1–255. | EQQX338 |
| 303 | The duration time of the operation is not valid. It must be from 00.00 to 99.59. | EQQX339 |
| 304 | The smoothing factor is not valid. It must be a number from 0 through 999. | EQQX340 |
| 305 | The feedback limit is not valid. A valid feedback limit is a number from 100 through 9 99. | EQQX341 |
| 306 | The automatic error completion code is not valid. | EQQX342 |
| 307 | The job name is not valid. | EQQX343 |
| 308 | The operation input arrival relative day is not valid. | EQQX344 |
| 309 | The operation input arrival time is not valid. | EQQX345 |
| 310 | The operation deadline relative day is not valid. | EQQX346 |
| 311 | The operation deadline time is not valid. | EQQX347 |
| 312 | The workstation resource 1 usage is not valid. | EQQX348 |
| 313 | The workstation resource 2 usage is not valid. | EQQX348 |
| 314 | The parallel processing count is not valid. | EQQX349 |
| 315 | The number of internal predecessors is not valid; it is not compatible with the actual number of predecessors in the record. | EQQX350 |
| 316 | The number of external predecessors is not valid; it is not compatible with the actual number of predecessors in the record. | EQQX351 |
| 317 | The number of special resources is not valid; it is not compatible with the actual number of special resources in the record. | EQQX352 |
| 318 | The operation part of the application description record contains not valid characters . | EQQX353 |
| 319 | Cancel if late specified for the non time-dependent job. | EQQX412 |
| 320 | Relative start day missing for the time-dependent job. | EQQX413 |
| 321 | Start time missing for the time-dependent job. | EQQX414 |
| 322 | Job name is missing for the computer, printer, or job setup operation. | EQQX415 |
| 323 | Number of parallel servers must be 1 for an operation on a computer workstation. | EQQX419 |
| 350 | Incorrect number of conditions. | EQQX074 |
| 351 | Incorrect number of condition dependencies. | EQQX075 |
| 352 | Duplicate condition. | EQQX076 |
| 353 | Condition contains incorrect characters. | EQQX077 |
| 354 | Condition number incorrect. It must be in the range 1-999. | EQQX078 |
| 355 | Number of condition dependencies incorrect. You must specify at least one condition dependency. | EQQX079 |
| 357 | Incorrect condition counter. | EQQX081 |
| 358 | Duplicate condition dependency. | EQQX082 |
| 359 | The condition dependency ID is not valid. | EQQX083 |
| 360 | The condition dependency specifies an incorrect predecessor type. It must be I or E. | EQQX084 |
| 361 | The application ID for the conditional internal predecessor is not valid. | EQQX085 |
| 362 | The application ID for the conditional external predecessor is not valid. | EQQX086 |
| 363 | The workstation name for the conditional predecessor is not valid. | EQQX087 |
| 364 | The operation number for the conditional predecessor is not valid. | EQQX088 |
| 365 | The condition dependency type is not valid. It must be RC or ST. | EQQX089 |
| 366 | The condition dependency operator is not valid. Valid values are GE, GT, LE, LT, EQ, NE, and RG. | EQQX090 |
| 367 | The condition dependency contains an incorrect RC value. | EQQX091 |
| 368 | The condition dependency contains an incorrect ST value. | EQQX092 |
| 369 | The condition dependency contains invalid characters. | EQQX093 |
| 370 | The internal predecessor specified in the condition dependency does not exist. | EQQX094 |
| 371 | You cannot define a conditional dependency for a not centralized operation. | EQQX095 |
| 372 | You cannot define a job as both conditional and normal predecessor. | EQQX096 |
| 373 | Inconsistent number of condition dependencies. | EQQX097 |
| 378 | The step level dependency check type is not valid. It must be RC. | EQQX105 |
| 379 | The procedure step name is missing in a step level dependency definition. | EQQX106 |
| 380 | The step name, in a step level dependency definition, contains an incorrect character. | EQQA336 |
| 381 | Incorrect step name in a step level dependency definition. The first character must be alphabetic. | EQQA337 |
| 382 | The procedure step name, in a step level dependency definition, contains an incorrect character. | EQQA338 |
| 383 | Incorrect procedure step name in a step level dependency definition. The first character must be alphabetic. | EQQA339 |
| 400 | The workstation name for the internal predecessor is not valid. | EQQX354 |
| 401 | The operation number for the internal predecessor is not valid. | EQQX355 |
| 402 | The transport time for the internal predecessor is not valid. | EQQX356 |
| 403 | The internal predecessor block contains invalid characters. | EQQX357 |
| 404 | All internal processors in an operation must be unique. | EQQX395 |
| 450 | The required application description does not exist. | EQQX377 |
| 455 | The required application description does not contain an operator with the specified operation number and workstation name. | EQQX378 |
| 456 | The required application does not contain an operation with the specified operation number. | EQQX379 |
| 457 | The required application does not contain an operation on the specified workstation. | EQQX380 |
| 500 | The application ID for the external predecessor is not valid. | EQQX358 |
| 501 | The workstation name for the external predecessor is not valid. | EQQX359 |
| 502 | The operation number for the external predecessor is not valid. | EQQX360 |
| 503 | The transport time for the external predecessor is not valid. | EQQX356 |
| 504 | The long-term plan print option for the external predecessor is not valid. Valid print options are A for always, and C for conditionally. | EQQX361 |
| 505 | The external predecessor block contains invalid characters. | EQQX357 |
| 506 | All external processors in an operation must be unique. | EQQX396 |
| 507 | More than 100 external predecessors were specified. | EQQX433 |
| 508 | criteria field for the external predecessor is not valid. | EQQX701 |
| 509 | Ismandatory field
for the external predecessor is not valid. |
EQQX700 |
| 510 | Application id for the external predecessor interval is not valid. | EQQX702 |
| 511 | Operation number for the external predecessor interval is not valid. | EQQX703 |
| 512 | Resolution criteria type for the external predecessor interval is not valid. | EQQX704 |
| 513 | From fields for
external predecessor interval are not valid. |
EQQX705 |
| 514 | To fields for
external predecessor interval are not valid. |
EQQX706 |
| 515 | Application id for the conditional external predecessor interval is not valid. | EQQX707 |
| 516 | Operation number for the conditional external predecessor interval is not valid. | EQQX708 |
| 517 | Number of External Predecessor IVL must be 0 or positive. | EQQX709 |
| 518 | Number of Condition IVL must be 0 or positive. | EQQX710 |
| 519 | Resolution criteria type for the conditional predecessor interval is not valid. | EQQX711 |
| 520 | From fields for
conditional predecessor interval are not valid. |
EQQX712 |
| 521 | To fields for
conditional predecessor interval are not valid. |
EQQX713 |
| 522 | Condition id for the conditional external predecessor interval is not valid. | EQQX714 |
| 523 | External predecessor interval must refer to an existing external predecessor. | EQQX715 |
| 524 | Conditional predecessor interval must refer to an existing external conditional predecessor. | EQQX716 |
| 526 | From fields for
the cross dependency predecessor are not valid. |
EQQX719 |
| 527 | To fields for
the cross dependency predecessor are not valid. |
EQQX720 |
| 528 | External or Conditional Predecessor interval type is not coherent with resolution criteria value. | EQQX717 |
| 530 | Criteria field for the conditional predecessor is not valid. | EQQX722 |
| 531 | External predecessor interval must have the start time before the end time. | EQQX723 |
| 532 | Conditional predecessor interval must have the start time before the end time. | EQQX724 |
| 600 | The special resource name is blank. | EQQX362 |
| 601 | The special resource held option type is not valid. Valid special resource held options are S for shared, and X for exclusive. | EQQX363 |
| 602 | The special resource block contains invalid characters. | EQQX364 |
| 603 | Duplicate special resources exist in the operation. | EQQX394 |
| 604 | Resource quantity is not in the range 1-999999. | EQQX438 |
| 605 | The on-error value is not valid. | EQQX429 |
| 632 | While trying to add or modify an AD record, duplicate external predecessors or redundant dependencies have been found. | EQQX603 |
| 700 | Duplicate operations exist in the application description record. | EQQX365 |
| 701 | A predecessor does not exist. | EQQX366 |
| 702 | There is a loop in the application network. | EQQX367 |
| 703 | All operations in the application do not belong to the same network. | EQQX368 |
| 704 | A job setup, processor, or print operation lacks a job name. | EQQX369 |
| 705 | A job setup operation has no processor operation as successor. | EQQX370 |
| 706 | A print operation has no predecessors. | EQQX371 |
| 707 | A print operation has more than one predecessor. | EQQX372 |
| 708 | A print operation does not have a processor operation as predecessor. | EQQX373 |
| 709 | A print operation has a predecessor with a different job name. | EQQX374 |
| 710 | A job setup operation has no processor successor with the same job name. | EQQX416 |
| 800 | The calendar record exceeds the maximum record size for the calendar description record, or has a shorter than minimum size. | EQQX400 |
| 801 | The calendar description record identifier was not valid. | EQQX321 |
| 802 | The calendar description record version was not valid. | EQQX301 |
| 803 | The calendar description ID is not valid. | EQQX401 |
| 804 | The date for the last update is either not valid or missing in the calendar description record. | EQQX316 |
| 805 | The time for the last update is either not valid or missing in the calendar description record. | EQQX317 |
| 806 | The time for Work Day End Time is either not valid or missing in the calendar description record. | EQQX402 |
| 807 | The number of weekday/date days has an invalid value in calendar description record. | EQQX403 |
| 808 | The common section of the calendar description record contains invalid characters. | EQQX404 |
| 809 | The size of the calendar description is too short to hold the number of weekday/date days indicated in the common section of the record. | EQQX405 |
| 810 | The weekday in the calendar description record is not valid. | EQQX406 |
| 811 | The weekday days are not in ascending order in the calendar description record. | EQQX407 |
| 812 | The status of the weekday/date field is not Work or Free. | EQQX408 |
| 813 | The date in the calendar description record is not valid. | EQQX409 |
| 814 | The date days are not in ascending order in the calendar description record. | EQQX410 |
| 815 | The variable section of the calendar description record contains not valid characters. | EQQX411 |
| 835 | The date and time specified in a request to modify an interval of a current plan workstation is not the start of an interval. | EQQX144 |
| 836 | An invalid value was specified for the parallel server capacity. Valid values are 0 through 99. | EQQX144 |
| 837 | An invalid value was specified for the capacity of a workstation resource. Valid values are 0 through 99. | EQQX144 |
| 850 | The application ID was not specified. | EQQX390 |
| 851 | The application ID is not bracketed by shift-in or shift-out character s. | EQQX382 |
| 852 | The DBCS part of the field application ID is blank. | EQQX384 |
| 853 | Check if the routine has encountered a superfluous shift-out or shift- in character within the DBCS part of the field application ID. | EQQX385 |
| 854 | The Field application ID contains either invalid DBCS characters, that is, out of the range X'41'- X'FE', or an odd number of blanks (X'40'), in the trailing part of the DBCS part of the field. | EQQX387 |
| 855 | The DBCS-field application ID contains an odd number of bytes. | EQQX392 |
| 860 | Group definition ID is not valid. | EQQX500 |
| 861 | Group definition ID not in bracketed DBCS format. | EQQX501 |
| 862 | No ID specified for DBCS group definition. | EQQX505 |
| 863 | Unpaired shift-out or shift-in characters in group definition. | EQQX502 |
| 864 | Invalid DBCS characters in group definition. | EQQX503 |
| 865 | Odd number of bytes in group definition. | EQQX504 |
| 870 | The field owner ID was not specified. | EQQX391 |
| 871 | The field owner ID is not bracketed by shift-in or shift-out character s. | EQQX383 |
| 872 | The DBCS part of field owner ID is blank. | EQQX389 |
| 873 | The check routine has encountered a superfluous shift-out or shift-in character in the DBCS part of the field owner ID. | EQQX386 |
| 874 | The Field owner ID contains either invalid DBCS characters, that is, out of the rang e X'41'- X'FE', or an odd number of blanks (X'40'), in the trailing part of the DBCS part of the field. | EQQX388 |
| 875 | The DBCS-field owner ID contains an odd number of bytes. | EQQX393 |
| 1001 | The control block is not valid. | EQQX321 |
| 1002 | The block version is not valid. | EQQX301 |
| 1003 | The request type is not valid. | EQQX420 |
| 1004 | The length is not valid. | EQQX421 |
| 1011 | The input arrival date is missing. | EQQX422 |
| 1012 | The input arrival date is not valid. | EQQX423 |
| 1013 | The input arrival time is missing. | EQQX424 |
| 1014 | The input arrival time is not valid. | EQQX333 |
| 1015 | The application IDs are different. | EQQX425 |
| 1016 | The application ID is missing. | EQQX390 |
| 1017 | The DBCS application ID is not valid. | EQQX387 |
| 1018 | The application ID is not valid. | EQQX302 |
| 1021 | The deadline date or time is given (but not both). | EQQX426 |
| 1022 | The deadline date is not valid. | EQQX427 |
| 1023 | The deadline time is not valid. | EQQX335 |
| 1024 | The priority is not valid. | EQQX318 |
| 1031 | The predecessor input arrival date is missing. | EQQX428 |
| 1032 | The predecessor input arrival date is not valid. | EQQX423 |
| 1033 | The predecessor input arrival time is missing. | EQQX429 |
| 1034 | The predecessor input arrival time is not valid. | EQQX333 |
| 1035 | The predecessor application ID is missing. | EQQX430 |
| 1036 | The DBCS predecessor application ID is not valid. | EQQX382 |
| 1037 | The predecessor application ID is not valid. | EQQX302 |
| 1038 | An occurrence is dependent on itself. | EQQX434 |
| 1039 | The input arrival date is later than the deadline. | EQQL510 |
| 1040 | The input arrival time is later than the deadline. | EQQL510 |
| 1113 | The variable duration or deadline was not specified. | EQQX550 |
| 1114 | The variable duration is not valid. | EQQX551 |
| 1115 | The variable deadline is not valid, must be a numeric value from 0 to 99. | EQQX552 |
| 1116 | The variable deadline time is not valid. | EQQX553 |
| 1117 | With the variable duration or deadline you must associate a run cycle group or rule. | EQQX554 |
| 1118 | The value set for the variable duration or deadline is not a run cycle group nor an application rule. | EQQX555 |
| 1119 | The value set for the variable duration or deadline is not unique. | EQQX556 |
| 2001 | The status code is not valid. | EQQX431 |
| 2002 | The function code is not valid. | EQQX432 |
| 3033 | The repeat every value is incorrect for the run cycle specified. | EQQX458 |
| 3034 | The repeat end time repet is incorrect for run cycle runc. | EQQX459 |
| 3036 | A deadline time dltime before input arrival time iat was specified. | EQQX452 |