Binding an Internet service to an IP address
If the HCL Domino® server has multiple HCL Notes® network ports for TCP/IP (NRPC ports) and the server is also hosting the SMTP, POP3, IMAP, LDAP, Domino® IIOP (DIIOP) or Internet Cluster Manager (ICM) service, you must specify the NRPC port that you want the service to use in the NOTES.INI file. If you do not specify an NRPC port for an Internet service, by default the service will use the port listed first in the Ports setting in the NOTES.INI file. You can specify the same NRPC port for multiple Internet services.
To bind the SMTP, POP3, IMAP, LDAP, DIIOP, or ICM service
About this task
Bind each NRPC port to an IP address. If you don't know the port name to enter for an NRPC port, open the Server document, click the tab, and look at the ports associated with the TCP protocol.
Procedure
| Service | Action |
|---|---|
| POP3 | Enter POP3NotesPort=port name where port name is the name of the NRPC port that you want to link the service to. |
| IMAP |
Enter IMAPNotesPort=port name where port name is the name of the NRPC port that you want to link the service to. |
| SMTP |
Enter SMTPNotesPort=port name where port name is the name of the NRPC port that you want to link the service to. |
| LDAP |
Enter LDAPNotesPort=port name where port name is the name of the NRPC port that you want to link the service to. |
| DIIOP |
Enter DIIOPNotesPort=port name where port name is the name of the NRPC port that you want to link the service to. |
| ICM |
Enter ICMNotesPort=port name where port name is the name of the NRPC port that you want to link the service to. |
Example
The following example shows the lines (in bold) to add to the Ports section of the NOTES.INI file to bind two NRPC ports to their IP addresses and to specify the second NRPC port for the SMTP service. Domino® adds the lines that are not bold when you use either the Domino® Server Setup program or the Domino® Administrator's Setup Ports dialog box to enable a port.
Ports=TCPIP, TCP1P2
TCPIP=TCP, 0, 15, 0
TCPIP_TCPIPAddress=0,10.33.52.1
TCPIP2=TCP, 0, 15, 0
TCPIP2_TCPIPAddress=0, 209.98.76.10
SMTPNotesPort=TCPIP2To bind the HTTP service
About this task
Procedure
- On the tab of the Server document, enter one or more IP addresses or FQDNs for the server in the Host name(s) field.
- Select Enabled in the Bind
to host name field.Note: If the server is a partitioned server and has Web sites configured with separate IP addresses, enter the partition's IP address, and each Web site or virtual server's IP address in the Host name(s) field, separated by semicolons. Alternatively, you can use FQDNs in this field. Do not list additional Web sites and virtual hosts that have IP addresses that are already listed in this field.
Example
The following examples illustrate how to designate IP address values in the Host name(s) field for a Domino partition that runs multiple sites or virtual servers.
In the first example, a partition runs a virtual host that includes two web sites. One web site, sales.renovations.com, uses the same IP address as the partition, and the other, accounting.renovations.com, has its own IP address.
Enter the following in the Host name(s) field:
9.88.43.113;9.88.46.110In this example:
9.88.43.113 is the IP address
for both the partition and the Web site sales.renovations.com.
9.88.46.110 is
the IP address for the Web site accounting.renovations.com.
In the next example, a Domino partition serves as a virtual host, sales.renovations.com, that runs two virtual servers, accounting.renovations.com, and northeastsales.renovations.com. The partition and virtual host share a single IP address, while each of the two virtual servers has its own unique IP address.
Enter the following in the Host name(s) field:
9.88.43.113;9.88.46.114;9.88.46.115In this example:
9.88.43.113 is the IP address for both the partition and the virtual host sales.renovations.com.
9.88.46.114 is
the IP address for virtual server 1 (accounting.renovations.com).
9.88.46.115 is the IP address for virtual server 2 (northeastsales.renovations.com).