Creating Document Format Conversion Cluster

Procedure

  1. Log into the IBM® Integrated Solutions Console: https://DocsLab01.example.com:9043/ibm/console. DocsLab01.example.com is the Deployment Manager server.
  2. Navigate to Servers > Clusters > WebSphere Application Server Clusters.
  3. Click on New.
  4. At Step 1, enter the following information:
    Table 1. Cluster name parameterThis table provides suggested default value for cluster name.

    Field Value
    Cluster name IBMConversionCluster
    Note: Use this default value and do not change it.
  5. Click Next.
  6. At Step 2, enter the following information:
    Table 2. Member parametersThis table provides suggested default values pertaining to member.

    Field Value
    Member Name , IBMConversionMember1
    Node ConversionCluster_NODENAME_1, for example, DocsWin01
    Select Basis for first cluster member Create the member using an application server template. default
  7. Click Next.
  8. At Step 3, if additional server instances are needed, specify the member name and node then click Add Member. Refer to the Conversion cluster Server table for list of all the servers and nodes which will be part of the cluster.
    Table 3. Member parametersThis table provides suggested default values pertaining to member.

    Field Value
    Member Name IBMConversionMember2
    Node ConversionCluster_NODENAME_2, for example, DocsWin02
    Select Basis for first cluster member Create the member using an application server template. default
  9. Click Next.
  10. At Step 4, review the summary information. Click Finish.
  11. Save the changes to the master configuration.