See: Description
| Interface | Description |
|---|---|
| AddressAddCmd |
* Adds a new address entry for a user, organization or organizational unit.
|
| AddressBaseCmd |
Provides the base methods for AddressAddCmd and AddressUpdateCmd.
|
| AddressCheckCmd |
Determines whether or not a user or organization has at least one permanent address.
|
| AddressDeleteCmd |
Deletes an address for a user, organization, or organizational unit.
|
| AddressUpdateCmd |
Updates the address entry for a user, organization or organizational unit.
|
| AuditAddressCmd |
Checks the parameters that are passed into the AddressAdd and
AddressUpdate commands according to what is specified in the Address property file.
The command will get store directory from the CommandContext and use the store directory to find the property file. |
| AuditBaseCmd |
Provides the base methods for AuditAddressCmd, AuditUserRegistrationCmd and AuditOrgEntityCmd.
|
| AuditOrgEntityCmd |
Checks parameters that are passed into the OrgEntityAdd and
OrgEntityUpdate commands according what is specified in the OrgEntity.properties file.
|
| AuditUserRegistrationCmd |
Checks parameters that are passed into the UserRegistrationAdd and
UserRegistrationUpdate commands according what is specified in the UserRegistration property file.
|
| BuyerRegistrationAddCmd |
Interface for a command for adding a buyer organization.
|
| ECUserConstants |
Constants File for user commands.
|
| ListBusinessOrgEntityCmd |
This task command is used to give a list of Business organization entities.
|
| MemberGroupMemberUpdateCmd |
The MemberGroupMemberUpdateCmd interface must be implemented to provide a controller
command that adds users to a member group.
|
| MemberLockCmd |
This command is used to set the lock state of a given organization.
|
| MemberRoleAssignCmd |
Assigns roles to a member in the context of an organizational entity.
|
| MemberRoleUnassignCmd |
The MemberRoleUnassign command unassigns roles for a member from orgEntities.
|
| MemberRoleUpdateCmd |
Assigns roles to a member for an organization.
|
| OrganizationSetInSessionCmd |
This command is used to switch the current active organization.
|
| OrgEntityAddCmd |
Registers a new organization or organizational unit.
|
| OrgEntityRegistrationAddCheckApprovalCmd |
This command is used to check if approval is needed for an organization registration.
|
| OrgEntityRegistrationAddPostApprovalCmd |
This command is used to perform post approval processing for organization registration.
|
| OrgEntityRegistrationAddPostApprovalNotificationCmd |
This command is used to perform post approval organization registration actions.
|
| OrgEntityRegistrationAddPostRejectCmd |
This command is used to perform post rejection organization registration actions.
|
| OrgEntityRegistrationAddPreApprovalCmd |
This command is used to perform pre approval processing for organization registration.
|
| OrgEntityRegistrationCmd |
Provides the base methods for the following orgEntity registration commands:
OrgEntityAddCmd
OrgEntityUpdateCmd
It is not a URL command.
|
| OrgEntityUpdateCmd |
This command updates information about an organization or organizational unit.
|
| PostAddressAddCmd |
A task command called by AddressAdd command at the end of execution.
User can overwrite this task command to perform additional operation. |
| PostAddressCheckCmd |
A task command called by AddressCheck command at the end of execution.
User can overwrite this task command to perform additional operation. |
| PostAddressDeleteCmd |
A task command called by AddressDelete command at the end of execution.
User can overwrite this task command to perform additional operation. |
| PostAddressUpdateCmd |
A task command called by AddressUpdate command at the end of execution.
User can overwrite this task command to perform additional operation. |
| PostMemberRoleAssignCmd |
A task command called by MemberRoleAssign command at the end of execution.
User can overwrite this task command to perform additional operation. |
| PostMemberRoleUnassignCmd |
A task command called by MemberRoleUnassign command at the end of execution.
User can overwrite this task command to perform additional operation. |
| PostOrgEntityAddCmd |
A task command called by OrgEntityAdd command at the end of execution.
User can overwrite this task command to perform additional operation. |
| PostOrgEntityUpdateCmd |
A task command called by OrgEntityUpdate command at the end of execution.
User can overwrite this task command to perform additional operation. |
| PostRoleAddCmd |
A task command called by RoleAdd command at the end of execution.
User can overwrite this task command to perform additional operation. |
| PostUserRegistrationAddCmd |
A task command called by UserRegistrationAdd command at the end of execution.
User can override this task command to perform additional operations. |
| PostUserRegistrationAdminAddCmd |
A task command called by UserRegistrationAdminAdd command at the end of execution.
User can overwrite this task command to perform additional operation. |
| PostUserRegistrationAdminUpdateCmd |
A task command called by UserRegistrationAdminUpdate command at the end of execution.
Users can overwrite this task command to perform additional operations. |
| PostUserRegistrationUpdateCmd |
A task command called by UserRegistrationUpdate command at the end of execution.
User can overwrite this task command to perform additional operation. |
| PreAddressAddCmd |
A task command called by AddressAdd command at the begining of execution.
User can overwrite this task command to change the input to the command. |
| PreAddressCheckCmd |
A task command called by AddressCheck command at the begining of execution.
User can overwrite this task command to change the input to the command. |
| PreAddressDeleteCmd |
A task command called by AddressDelete command at the begining of execution.
User can overwrite this task command to change the input to the command. |
| PreAddressUpdateCmd |
A task command called by AddressUpdate command at the begining of execution.
User can overwrite this task command to change the input to the command. |
| PreMemberRoleAssignCmd |
A task command called by MemberRoleAssign command at the begining of execution.
User can overwrite this task command to change the input to the command. |
| PreMemberRoleUnassignCmd |
A task command called by MemberRoleUnassign command at the begining of execution.
User can overwrite this task command to change the input to the command. |
| PreOrgEntityAddCmd |
A task command called by OrgEntityAdd command at the begining of execution.
User can overwrite this task command to change the input to the command. |
| PreOrgEntityUpdateCmd |
A task command called by OrgEntityUpdate command at the begining of execution.
User can overwrite this task command to change the input to the command. |
| PreRoleAddCmd |
A task command called by RoleAdd command at the begining of execution.
User can overwrite this task command to change the input to the command. |
| PreUserRegistrationAddCmd |
A task command called by UserRegistrationAdd command at the begining of execution.
User can overwrite this task command to change the input to the command. |
| PreUserRegistrationAdminAddCmd |
A task command called by UserRegistrationAdminAdd command at the begining of execution.
User can overwrite this task command to change the input to the command. |
| PreUserRegistrationAdminUpdateCmd |
A task command called by UserRegistrationAdminUpdate command at the begining of execution.
User can overwrite this task command to change the input to the command. |
| PreUserRegistrationUpdateCmd |
A task command called by UserRegistrationUpdate command at the begining of execution.
User can overwrite this task command to change the input to the command. |
| ProcessParentMemberCmd |
This task command is used to calculate parentMemberId from given parentMember property.
|
| ProcessProfileTypeCmd |
This task command is called by UserRegistration commands to determine the
profileType of a user
during registration. |
| ProcessRequestPropertiesCmd |
This task command is used to process request properties for URL commands.
|
| ResellerOrgEntityRegistrationAddCmd |
This command is used to implement the organization registration
portion of the ResellerRegistrationAddCmd business flow.
|
| ResellerRegistrationAddCmd |
This command is used to perform reseller organization registration.
|
| ResellerUserRegistrationAddCmd |
This command is used to implement the user registration
portion of the ResellerRegistrationAddCmd business flow.
|
| RestoreOriginalUserSetInSessionCmd |
This command is used by a user to switch their identity from a forUserId
back to their original identity.
|
| RoleAddCmd |
RoleAdd command creates a role at the site level and assigns it to the Root Organization.
|
| RunAsUserSetInSessionCmd |
This command is used by an administrator to act on behalf of another user for
multiple request in a single session.
|
| SetBusinessEntityCmd |
This task command is called by
OrgEntityAddCmd command to set the BusinessEntity attribute. |
| UserRegistrationAddCheckApprovalCmd |
This command is an EntryAction command called by UBF to check if the user registration approval is required.
|
| UserRegistrationAddCmd |
The UserRegistrationAdd command creates a registration record for the user.
|
| UserRegistrationAddPostApprovalCmd |
Internal command called by the UBF framework to approve the registration of a user.
|
| UserRegistrationAddPostApprovalNotificationCmd |
This command is used to perform post approval notification for user registration.
|
| UserRegistrationAddPostRejectCmd |
Internal command called by UBF framework to reject the registration of a user.
|
| UserRegistrationAddPreApprovalCmd |
The UserRegistrationAddPreApprovalCmd command registers a guest user.
|
| UserRegistrationAdminAddCmd |
The UserRegistrationAdminAdd command allows an administrator to create a new user.
|
| UserRegistrationAdminCmd |
The UserRegistrationAdminCmd is the base for UserRegistrationAdminAdd and UserRegistrationAdminUpdate command.
|
| UserRegistrationAdminUpdateCmd |
This command allows an administrator to update information for a user.
|
| UserRegistrationCmd |
The UserRegistrationCmd command is the base command for the following user registration commands:
UserRegistrationAddPreApprovalCmd (Replace UserRegistrationAddCmd for adding approval)
UserRegistrationUpdateCmd
UserRegistrationAdminAddCmd
UserRegistrationAdminUpdateCmd
It is not a URL command.
|
| UserRegistrationRoleAssignCmd |
This task command is called by UserRegistrationAddPreApproval to assign roles during self-registration.
|
| UserRegistrationUpdateCmd |
The UserRegistrationUpdate command updates the registration record for a registered user.
|
| Class | Description |
|---|---|
| AddressAddCmdImpl |
Adds a new address entry for a user, organization or organizational unit.
|
| AddressBaseCmdImpl |
Implementation for AddressBase command which provides the base methods for AddressAddCmd and AddressUpdateCmd.
|
| AddressCheckCmdImpl |
Determines whether or not a user or organization has at least one permanent address.
|
| AddressDeleteCmdImpl |
Deletes an address for a user, organization, or organizational unit.
|
| AddressUpdateCmdImpl |
Updates the address entry for a user, organization or organizational unit.
|
| AuditAddressCmdImpl |
Checks the parameters that are passed into the AddressAdd and
AddressUpdate commands according to what is specified in the Address property file.
The command will get store directory from the CommandContext and use the store directory to find the property file. |
| AuditBaseCmdImpl |
Provides the base methods for AuditAddressCmd, AuditUserRegistrationCmd and AuditOrgEntityCmd.
|
| AuditOrgEntityCmdImpl |
Checks parameters that are passed into the OrgEntityAdd and
OrgEntityUpdate commands according what is specified in the OrgEntity.properties file.
|
| AuditUserRegistrationCmdImpl |
Checks parameters that are passed into the UserRegistrationAdd and
UserRegistrationUpdate commands according what is specified in the UserRegistration property file.
|
| BuyerRegistrationAddCmdImpl |
Implementation of a command performing buyer organization registration.
|
| HTMLEncoder |
The HTMLEncoder class is a utility class which is used to do HTML encoding.
|
| ListBusinessOrgEntityCmdImpl |
Finds a list of Business organization entities.
|
| MemberGroupMemberUpdateCmdImpl |
The MemberGroupMemberUpdateCmdImpl class implements the MemberGroupMemberUpdateCmd interface to
provide the controller command that adds users to a member group.
|
| MemberLockCmdImpl |
This command sets the lock state of a given organization.
|
| MemberRoleAssignCmdImpl |
Assigns roles to a member in the context of an organizational entity.
|
| MemberRoleUnassignCmdImpl |
The MemberRoleUnassign command unassigns roles for a member from orgEntities.
|
| MemberRoleUpdateCmdImpl |
The MemberRoleUpdateCmdImpl command assigns roles to a member for an organization.
|
| OrganizationSetInSessionCmdImpl |
This command is used to switch the current active organization.
|
| OrgEntityAddCmdImpl |
Registers a new organization or organizational unit.
|
| OrgEntityRegistrationAddApprovalBaseCmdImpl |
This command is a base class for commands in the organization registration approval process.
|
| OrgEntityRegistrationAddCheckApprovalCmdImpl |
This command is used to check if approval is needed for an organization registration.
|
| OrgEntityRegistrationAddPostApprovalCmdImpl |
This command is used to perform post approval processing for organization registration.
|
| OrgEntityRegistrationAddPostApprovalNotificationCmdImpl |
This command is used to perform post approval organization registration actions.
|
| OrgEntityRegistrationAddPostRejectCmdImpl |
This command is used to perform post rejection organization registration actions.
|
| OrgEntityRegistrationAddPreApprovalCmdImpl |
This command is used to perform pre approval processing for organization registration.
|
| OrgEntityRegistrationCmdImpl |
The implementation class for the OrgEntityRegistrationCmd
|
| OrgEntityUpdateCmdImpl |
This command updates information about an organization or organizational unit.
|
| PostAddressAddCmdImpl |
The default implementation of the PostAddressAdd command.
|
| PostAddressCheckCmdImpl |
The default implementation class for PostAddressCheck command.
|
| PostAddressDeleteCmdImpl |
The default implementation class for PostAddressDelete command.
|
| PostAddressUpdateCmdImpl |
The default implementation class for PostAddressUpdate command.
|
| PostMemberRoleAssignCmdImpl |
The default implementation class for PostMemberRoleAssign command.
|
| PostMemberRoleUnassignCmdImpl |
The implementation class for PostMemberRoleUnassign command.
|
| PostOrgEntityAddCmdImpl |
The default implementation class for PostOrgEntityAdd command.
|
| PostOrgEntityUpdateCmdImpl |
The default implementation class for PostOrgEntityUpdate command.
|
| PostRoleAddCmdImpl |
The default implementation class for PostRoleAdd command.
|
| PostUserRegistrationAddCmdImpl |
The default implementation class for PostUserRegistrationAddCmd command, which is run after
UserRegistrationAddCmd command is executed.
|
| PostUserRegistrationAdminAddCmdImpl |
The default implementation class for PostUserRegistrationAdminAdd command.
|
| PostUserRegistrationAdminUpdateCmdImpl |
The default implementation class for PostUserRegistrationAdminUpdate.
|
| PostUserRegistrationUpdateCmdImpl |
The default implementation class for PostUserRegistrationUpdateCmd command.
|
| PreAddressAddCmdImpl |
The default implementation class for PreAddressAddCmd command.
|
| PreAddressCheckCmdImpl |
The default implementation class for PreAddressCheckCmd command.
|
| PreAddressDeleteCmdImpl |
The default implementation class for PreAddressDeleteCmd command.
|
| PreAddressUpdateCmdImpl |
The default implementation class for PreAddressUpdateCmd command.
|
| PreMemberRoleAssignCmdImpl |
The default implementation class for PreMemberRoleAssign command.
|
| PreMemberRoleUnassignCmdImpl |
The default implementation class for PreMemberRoleUnassign command.
|
| PreOrgEntityAddCmdImpl |
The default implementation class for PreOrgEntityAdd command.
|
| PreOrgEntityUpdateCmdImpl |
The default implementation class for PreOrgEntityUpdate command.
|
| PreRoleAddCmdImpl |
The default implementation class for PreRoleAdd command.
|
| PreUserRegistrationAddCmdImpl |
The default implementation class for PreUserRegistrationAdd command.
|
| PreUserRegistrationAdminAddCmdImpl |
The default implementation class for PreUserRegistrationAdminAdd command.
|
| PreUserRegistrationAdminUpdateCmdImpl |
The default implementation class for PreUserRegistrationAdminUpdate command.
|
| PreUserRegistrationUpdateCmdImpl |
The default implementation class for PreUserRegistrationUpdate command.
|
| ProcessParentMemberCmdImpl |
This task command is used to calculate and validate the parentMemberId given
parentMember property.
|
| ProcessProfileTypeCmdImpl |
This task command is called by UserRegistration commands to determine the
profileType of a user during registration. |
| ProcessRequestPropertiesCmdImpl |
This task command is used to process request properties for URL commands.
|
| PropertyResourceBundleReader |
The PropertyResourceBundleReader is used by the ResourceBundleDataBean and Member Subsystem commands to find
property files and reorganize the information of property files to different formats.
|
| ResellerOrgEntityRegistrationAddUBFCmdImpl |
Register a new organization using the UBF ResellerOrgEntityRegistration
business flow.
|
| ResellerRegistrationAddCmdImpl |
This command is used to perform reseller organization registration.
|
| ResellerUserRegistrationAddUBFCmdImpl |
Register a new user using the UBF ResellerUserRegistration
business flow.
|
| RestoreOriginalUserSetInSessionCmdImpl |
This command is used to switch the current active organization.
|
| RoleAddCmdImpl |
RoleAdd command creates a role at the site level and assigns it to the Root Organization.
|
| RunAsUserSetInSessionCmdImpl |
This command is used by an administrator to act on behalf of another user for
multiple request in a single session.
|
| SetBusinessEntityCmdImpl |
This task command is called by
OrgEntityAddCmd command to set the BusinessEntity attribute. |
| UserRegistrationAddApprovalBaseCmdImpl |
Base class for UserRegistrationAddPostRejectCmdImpl and UserRegistrationPostApprovalCmdImpl
|
| UserRegistrationAddCheckApprovalCmdImpl |
This command is an EntryAction command called by UBF to check if the user registration approval is required.
|
| UserRegistrationAddCmdImpl |
The UserRegistrationAdd command creates a registration record for the user.
|
| UserRegistrationAddPostApprovalCmdImpl |
Internal command called by UBF framework to approve the registration of a user.
|
| UserRegistrationAddPostApprovalNotificationCmdImpl |
This command is used to perform post approval notification for user registration.
|
| UserRegistrationAddPostRejectCmdImpl |
Internal command called by UBF framework to reject the registration of a user.
|
| UserRegistrationAddPreApprovalCmdImpl |
The UserRegistrationAddPreApprovalCmd command registers a guest user.
|
| UserRegistrationAddUBFCmdImpl |
Register a user using the UBF flow for user registration.
|
| UserRegistrationAdminAddCmdImpl |
The UserRegistrationAdminAdd command allows an administrator to create a new registered user, or register an existing
guest user.
|
| UserRegistrationAdminCmdImpl |
Implementation for the UserRegistrationAdminCmd command which is the base for the following user registration commands:
UserRegistrationAdminAddCmd
UserRegistrationAdminUpdateCmd
It is not a URL command.
|
| UserRegistrationAdminUpdateCmdImpl |
This command allows an administrator to update information for a user.
|
| UserRegistrationCmdImpl |
Implementation class for UserRegistrationCmd.
|
| UserRegistrationRoleAssignCmdImpl |
This task command is called by UserRegistrationAddPreApproval to assign roles during self-registration.
|
| UserRegistrationUpdateCmdImpl |
The UserRegistrationUpdate command updates the registration record for a registered user.
|