Capturing Windows Images

When you capture an image, you are creating an image that can be customized and applied to other computers in your network.

Capturing an image involves a set of tasks that result in the creation of a generic image that can be applied on any computer. The process of capturing an image can affect the product activation of the captured system. To avoid this problem, you must capture an image from a virtual machine with snapshot restoration capability.

During the capture phase, the machine you are capturing must be a member of a workgroup and cannot be in a domain, because the Sysprep tool runs only on machines in a workgroup.

The captured image is stored on a network share, ready to be uploaded to the server into the Image Library.

Because captured images are firmware independent, you can deploy (for reimaging or Bare Metal), images that are captured from BIOS machines to UEFI machines and vice versa.

From the Capture dashboard wizard, you can specify SMB share information and choose capture options.

The Capture wizard is organized into two sections:

  • Specify SMB Share information
  • Choose Capture Options

Choosing capture options and credentials

To select the correct MDT bundle for the Windows version you plan to capture, see Installing MDT Bundle Creators.

Capture requirements and restrictions

Check the following requirements and restrictions before you capture an image:
  • After you capture an image of a Windows 2008 R2 or later with multiple disks, the reference machine reboots and the second disk goes offline. You must bring the second disk online again to see the data on it.

  • Dedicated boot partitions (also known as System Reserved on BIOS machines and ESP on UEFI machines) are captured but are not restored on the deployed machine. These partitions are instead re-created on the deployed machine to allow any combination of firmware architectures between source and target machines (BIOS to BIOS, BIOS to UEFI, UEFI to BIOS, UEFI to UEFI).

  • If the image you are capturing has a recovery partition, as, for example, in the case of Windows 8 or Windows 8.1 UEFI machines, this partition is recognized and marked as such in the partition mappings menu for the reimage or bare metal deployments.

  • Capturing an image on a system with an encrypted disk is not supported. You must decrypt the disk before you begin the capture process.

  • To capture Windows 10 release ID 2004, MDT Bundle 3.10.33 or later is required.

  • Capture of a Windows 10 image might fail (sysprep error while generalizing the image) if the system has Microsoft Store-based applications (Appx) installed. If one or more of these applications were updated, the capture process might fail to generalize the image. The error log displays which applications are causing the problem. One or more messages similar to the following are logged:
    Error SYSPRP Package <Package_name> was installed for a user but not provisioned for all users.
    This package will not function properly in the sysprep image.
    Where Package_name is the name of the application that caused the problem. These applications must be uninstalled before you begin the capture process.
    You can list Microsoft Store-based applications by running the following command from a powershell prompt:
    Get-AppxPackage -AllUsers 
    You can choose to manually uninstall each of the applications that makes the sysprep fail with the following command:
    Remove-AppxPackage <package name> -AllUsers
    You can find more details at:

    Sysprep fails after you remove or update Microsoft Store apps that include built-in Windows images

    Alternatively you can run the capture task with the same local user that ran the Microsoft Store-based applications updates. Nevertheless, some of them might need to be uninstalled before successfully capturing the image. You can optionally select the check box to remove the Microsoft Store-based applications during the capture task. MDT Bundle later than 3.10.21 is required.

    Note: Also the following error might occur if the system has Microsoft Store-based applications (Appx) installed.
    Error SYSPRP Failed while deleting repository files under C:\ProgramData\Microsoft\Windows\AppRepository

    If this error occurs, run the capture task with the same local user that applied some changes to the AppRepository.

    To do this, click the expand icon next to OS to capture when Windows 10 is selected, to display the section that allows you to make the choice.



    If you select the check box to run the capture with a local user account, you must provide its credentials and the local user must be logged on to the target computer when the capture task is running.

  • To capture a Windows Hyper-V Generation 1 virtual machine successfully, you must select the Disable enhanced error detection option.
  • To capture an image on a UEFI client with the Secure Boot firmware option enabled, you must select the Disable enhanced error detection option, and you must use an MDT Bundle with WinPE 4 or later.